Jump to content
SAU Community

Recommended Posts

Hi everyone just thought i'd post some info for those that are interested, about 18 months ago I popped my poor old RB25 and after much deliberation chose a work shop in the mountains to build my new car "Steves Autobarn 47877172" which went from dropping forged pistons into my RB25 to the monster build you see today (after my mate Doughboy told me it was cheaper hahaha like hell it was) all through out the build Steve has done nothing but 100% perfect work his perfection attitude has done nothing but surprise me and take the build to a higher lever at each stage I can not speak highly enough of him and the quality of work he produces as you'll see, he's built me a car of the highest standard not just a motor

A quick spec list of the car is

RB30 bot end

Argo rods

CP pistons

ACL race series bearings

RB26 head

HKS head gasket

HKS cams

Tomei springs lifter and buckets etc

Fully manualised www.keas.com.au 3 speed Jatco

Haltech E11v2 ecu

Once the build was finished we got Adam from Just Engine Management (JEM) http://www.justenginemanagement.com/ to tune the car it made 410rwkw at 20psi and 441psi at 25psi once again I was 100% happy with Adams tune and can't speak highly enough of him and how well he can tune as the times/power figures show

Tonight was pretty well a test night we were running 20psi which is 410rwkw and wanted to ease back in rather then all out at the first meet and had no idea how the 235 drag radials would hold up, so by all accounts I think there's plenty left in her

Thanks to everyone involved in the build especially Chris for all his help and time oh and last but not least my beautiful wife Rachael for putting up with all the late nights and time spent away from home during the build

:) Brett

Link to comment
https://www.sau.com.au/forums/topic/94295-my-big-adventure/
Share on other sites

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Look awesome mate, well done... can't wait to watch this car go over the next few months, especially considering your not even pushing it at the moment!! I can't believe it got a 10.5 first night out, that's friggin awesome :(

I assume you're all approved by Andra tech regulations to run 10.99 or quicker? :(

Link to comment
https://www.sau.com.au/forums/topic/94295-my-big-adventure/#findComment-1702121
Share on other sites

Rock on mate!! That is a really nice combo and it's good to see you knew what you wanted out of it and reached straight for the auto. It will be a big help in keeping the thing reliable and keeping it going quickly down the strip.

Link to comment
https://www.sau.com.au/forums/topic/94295-my-big-adventure/#findComment-1702288
Share on other sites

Good work Brett, those 18 months from engine out to re-appearing at the track were pretty damn hard. As a few people have mentioned, you did well doing such a thorough upgrade in such a short amount of time. Especially to pull times on your first outing without any changes, without any hiccups or dramas. A couple of credits:

Steve @ Steve's Autobarn: Attention to detail and being a perfectionist really shines through (someone say anal?). Everything is done once and done properly, there's nothing that needs to be redone or modified. He took the project on like it was his own and did himself proud with the little details.

Adam @ JEM: I poo-poo'd the Haltech but after seeing how flawlessly the car starts, drives and delivers the power I'm inclined to think it's an awesome combination. I can see why you had the confidence to let Adam tune (let alone touch) your car, and seeing how effortlessly he got the tune spot on for pump fuel... well I can only wait for the further stages with C16 and NOS! Adam's pretty cool too, open to suggestions and really listens to what you want him to do with your car.

Also big props to yourself. It was your combination, you did all the hard work getting it all together, talking to the right people and getting amongst it. It wasn't a case of dropping the car off at a couple of workshops and picking it up later - throughout the build where you were keen to get your hands dirty and help out - all the long nights alone with Steve with nothing but an oil burner and a bearskin rug to keep you warm... well something like that.

Oh and last the White Cockatoo, if that place didn't exist you'd probably weight 20kgs less and would have been that much closer to a 9 off the trailer! Hahaha :(

Link to comment
https://www.sau.com.au/forums/topic/94295-my-big-adventure/#findComment-1702305
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...