Jump to content
SAU Community

Recommended Posts

i like the work you have done but whats with the valves?..are they standard?

heres what a good head job looks like,i hope this helps a few if there thinking of doing head work.

Hey this is very nice. Looks the the quech area has been rounded off for the valves. I've seen this before, I'm impressed. Anyone else seen this stuff before?

  • Replies 315
  • Created
  • Last Reply

Top Posters In This Topic

not sure, as the gearbox wont shift above 9k rpm and i need oversize pulleys to prevent blowing the air con compressor up and to slow down the power steering and water pump (n1 which flows less already so might get hot in traffic with an oversize pulley and cruising speeds)

i think the need for over 9k rpm wont be very often as it is going to be a street car and not a drag/track car, so i need it reliable in traffic as much as possible, i have another daily driver, so wont be drivin it more than 1-2 times a week for cruises on weekends, or maybe the occasional thrash after work :O

the tuner i am using, does race/rally cars, and high power street cars, currently his best hp is just under 700hp at the wheels from an evo 6 i think (2L turbo)

just sorting all the fuel lines at the moment, and god damn they are pricey  ;)

spent $400 on turbo braided lines for water and oil

another $350+ on fuel lines and fittings

and i still havent got everything yet.  B)

cheers

Brad

Hey Brad,

I know what youre going thru with the braid and fittings; i must have spent about $1800 at earls this month on water, oil and fuel fittings!

Ive done a bit of research, and ive found that the teflon lined braided hose from Earls (Speed Flex its called) is the go for fuel. Everyone ive spoken to who have used normal braid have ended up with terrible fuel smell in the boot or cabin. If youve got the earls catalogue, you'll see that they have disclaimers everywhere about the use of high octane fuels with their conventional braid. Also, the Speed flex is graphite (?) lined so as to prevent the built up of static electricity. The braid is about $6/m more and the fittings are about 20 - 30% more but i feel its worth it.

Or they sell aluminium tubing that can be formed into shape for fuel lines with aluminium tubing adapters.

Just a thought.

Shaun.

Hey Brad,

I know what youre going thru with the braid and fittings; i must have spent about $1800 at earls this month on water, oil and fuel fittings!

Ive done a bit of research, and ive found that the teflon lined braided hose from Earls (Speed Flex its called) is the go for fuel. Everyone ive spoken to who have used normal braid have ended up with terrible fuel smell in the boot or cabin. If youve got the earls catalogue, you'll see that they have disclaimers everywhere about the use of high octane fuels with their conventional braid. Also, the Speed flex is graphite (?) lined so as to prevent the built up of static electricity. The braid is about $6/m more and the fittings are about 20 - 30% more but i feel its worth it.

Or they sell aluminium tubing that can be formed into shape for fuel lines with aluminium tubing adapters.

Just a thought.

Shaun.

yes ive used the teflon fuel braided line and fittings to suit :) thanks for the warning :) total ive spent now is $1200 on fittings and line for water and oil lines for turbo, fuel lines and oil filter relocator. looks the goods but ;)

also my valves r stock sizes.

Hey this is very nice. Looks the the quech area has been rounded off for the valves. I've seen this before, I'm impressed. Anyone else seen this stuff before?

i had the guys at rams head service in windsor in sydney do the work for me,they also did the head for mario(gtr-700),when the guys at jun seen the work they were inpressed,i supplied all jun gear,there cost of machning,assembly match porting the plenum,seal and settings,flow test,the lot was $3800,some would say thats alot but i think for the figures it produced im more than happy.
i had the guys at rams head service in windsor in sydney do the work for me,they also did the head for mario(gtr-700),when the guys at jun seen the work they were inpressed,i supplied all jun gear,there cost of machning,assembly match porting the plenum,seal and settings,flow test,the lot was $3800,some would say thats alot but i think for the figures it produced im more than happy.

Wow all the pretty pics, but the real question is what does it flow

  • 2 weeks later...

its about a week from being finished and ready to book it in for the initial run in tune :huh:

heres a few pics of some interesting bits....

109_0926.jpg

109_0929.jpg

this is the coilpack setup with 6 msd coilpacks mounted under the coil cover neatly

109_0940.jpg

heres one of the cooler pipes in all its shining glory, polished like a mirror ;)

109_0950.jpg

under the stagea, and remote oil filter setup is shown, and 9L sump

109_0959.jpg

109_0961.jpg

wastegate exhaust outlet pipe vented to the atmosphere :)

109_0967.jpg

thats all for the moment :)

Brad

whats ohh mean?  ;)

its the sound of disappointment.....your last comment was "thats all for now"....so i responded "ohh".....i.e. i wanted to see more.

its getting very close now.

good luck with initial tune and run-in.

its the sound of disappointment.....your last comment was "thats all for now"....so i responded "ohh".....i.e. i wanted to see more.

its getting very close now.

good luck with initial tune and run-in.

hehe, no worries thanx mate, and the oil filter is heaps out of the way above the swaybar almost so its got no hope off being hit as the sump/ xmember is way lower.

only bad issues is i got a stock gtr cooler on it at the moment, and no oil cooler (only 9L sump) so whats the opinions on that for the initial tune/and tune after run in of around 500rwhp.

might get an oil cooler, but im sure the gtr cooler could manage 500rwhp for the moment???

dangerous and risky or what? B)

hehe, no worries thanx mate, and the oil filter is heaps out of the way above the swaybar almost so its got no hope off being hit as the sump/ xmember is way lower.

only bad issues is i got a stock gtr cooler on it at the moment, and no oil cooler (only 9L sump) so whats the opinions on  that for the initial tune/and tune after run in of around 500rwhp.

might get an oil cooler, but im sure the gtr cooler could manage 500rwhp for the moment???

dangerous and risky or what?  B)

Yes power levels generate heat but.....its how long and hard you run them for that increases damage/wear. For run-in it wont be needed...we only ran a cooler on ours recently due to the drag calander running events in Nov. and Dec.

Factor in a cooler later as its easy to intstal because you have the relocator.

Are you running a Nismo thermostat ??

P.S. you thought i was having a go at you with the ohh comment....lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...