Jump to content
SAU Community

Recommended Posts

It's been like 2 - 3 weeks now with no Ultimate. I've had to use some Synergy 98 & Optimax.

I want Ultimate again! Anybody who always uses ultimate but is having to use another fuel feeling the difference? speak up.

I think Optimax has been slower, 3rd gear 12psi just isn't pulling as quick I think.

Link to comment
https://www.sau.com.au/forums/topic/98459-bp-ultimate/
Share on other sites

I have been using vortex98 for the last few tanks and fuel economy is exactly the same.

The car does pull harder in 2nd and 3rd!!

I was suprised but my car runs better on vortex98 than ultimate or optimax.

Link to comment
https://www.sau.com.au/forums/topic/98459-bp-ultimate/#findComment-1789549
Share on other sites

I'm of the understanding that most of the east coast has got an Ultimate shortage, with stocks to be restored at the end of December or early January.

I've been giving Synergy 8000 a go, I'm on my 3rd or 4th tank, I've noticed that power seems to be ever so slightly up, though my fuel economy has dropped slightly.

Link to comment
https://www.sau.com.au/forums/topic/98459-bp-ultimate/#findComment-1789694
Share on other sites

yep, there's been none in my town for at least 3 weeks (2 BP's, both out).

is really beggining to sh*t me cos i gotta drive 15 mins down the road to get optimax, or remember to fill up when im passing a shell/mobil out of town.

tried vortex and wasn't real keen, my knock levels went higher than i've ever seen them (although was a warmish day and car is tuned for ultimate).

Link to comment
https://www.sau.com.au/forums/topic/98459-bp-ultimate/#findComment-1791718
Share on other sites

Well ive been running on synergy 8000 and recently swapped to optimax extreme.. and as far as im concerned it kills bp ultimate. I've got noticable power differences, specially after re-setting the ecu.

Though will good to be back to ultimate again, no ethanol or anything to worry about:)

Dayne

Link to comment
https://www.sau.com.au/forums/topic/98459-bp-ultimate/#findComment-1793330
Share on other sites

i think the "Ultimate" part in BP ultimate's name has a lot of people fooled lol

I think you'll find most workshops agree you can tune the hardest on Ultimate for any pump 98 fuel in Aust.

#1 Ultimate

#2 Synergy 8000

#3 Optimax

Some people say Synergy is a tad better than Ultimate but usually Ultimate is the prefered fuel for tuners trying to get the most outa it. I got the most power & lowest knock out of my car tuned on Ultimate.

Edited by geno8r
Link to comment
https://www.sau.com.au/forums/topic/98459-bp-ultimate/#findComment-1793466
Share on other sites

how do you go about resetting the ECU?

Disconnect the battery, press the brake pedal to drain all the remaining power. Maybe leave it for a while then just hook the battery back up.

And I've been using Optimax since they went out of Ultimate and to be honest there is no difference at all imo. :(

Link to comment
https://www.sau.com.au/forums/topic/98459-bp-ultimate/#findComment-1794029
Share on other sites

i ran my car on ultimate all the time and i found it pulled harder, had better economy and ran better, less lumpy in the idle. Using vortex and sh*t like that made my car crap, noticed it clutch kicking at pt.g last week.

GO BP ULTIMATE!!!!!!!! please come back to me

Link to comment
https://www.sau.com.au/forums/topic/98459-bp-ultimate/#findComment-1794053
Share on other sites

Sounds like you guys over east are just getting what we went through over here about a month ago. The refinery had a problem so they couldn't produce anything but normal unleaded, so most stations were without 98 for a few weeks. Over east was still ok because they stockpile it I guess. Now that it's normal over here, that was probably the priority so all the fuel has probably came to us. :)

It won't be too long I imagine. Unless there are BP refinery's over east, I would think there would be which would mean I'm babbling shit.

You lot are complaining but over here Ultimate is the only 98 fuel we can get so it hurt us a LOT more!!!

Link to comment
https://www.sau.com.au/forums/topic/98459-bp-ultimate/#findComment-1794884
Share on other sites

Ultimate is more expensive than extreme 100 here in QLD... On any given day BP is at least 2 cents dearer than shell at aspley and virgina....

So i stopped going to get fuel from BP along time ago...

I had the fc tuned on optimax and found extreme to knock a bit more but the extra 50km;s per tank has not rally made me a fan... ill stick to 98 plus i get 4c off a litre at shell also...

So thats a saving of about 3 bucks a tank... I also get a 600ml coke when i fill so thats a free coke in my books....

50-60 litres of fuel for the car and 600ml of coke for me....

Link to comment
https://www.sau.com.au/forums/topic/98459-bp-ultimate/#findComment-1796224
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • Shimmed or shimless, still solid, no hydraulic pump up stuff.
    • They have said food will be limited. Mainly meat pies and sausage rolls from memory. But they have a coffee van!
×
×
  • Create New...