CEF11E

You can't run more than 7psi with a baby anyways, have to wait till they are a couple of years old before you can run full boost.

Has anyone been able to get in touch with mark lately? I send him an email a week ago and have had no reply.

I can vouch for this car. I have been in it at eastern creek during a drift day and I can say it is a very fast and very well set up car for drift. the guy who built it knows what he is doing and the car is not dodge in the slightest. really nice tight little car. perfect for getting into drifting...

what WazR32GTSt said. you can get a remap for your car for under $300 that is suit to your turbo. there is a guy called DRdrift and another called yoshitokio both do good work from what I have heard on these forums.

wait till you have had the mods done. dont bother remapping untill then. the most you would pickup would be 10rwkw anyway.

yeah I had one cut in a mall. did not work. at least worked occasionally. the nissan blueprint sounds the go I have the key number so should be sweet. has any one had nissan do a key for them?

My car key is really worn out to the point where it only sometimes works in the locks. its the same on both doors, boot and ignition. Rather than replace all the barrels as they are still fine can you get a replacement key from Nissan? the key has a number on it can a key be orgered for it and how much? or is there anywhre that can cut me a replacement to the original specs? the car is an import. so don't know how helpful nissan australia will be. Any one had any experience with this?

take off the cover and have a look at the EPROM small about 13mm x 40mm with 28 pins. 14 either side. If it has a silver sticker with MEC written on it or it is actually soldered to the board it is stock. If the chip sits in a cradle on the board with no sticker or a sticker other than silver it is a remaped ecu.

whine/burgandy R32 with FMIC in mint condition leaving woden at 5:00 today I was in black R32

that alarm the warlock 3500 is crappy, no battery backup and no glass breakage sensor. only 2 point immobilisation.

check! one that slaps people in the head and makes people throw up... I will have to clean the interior but at least the car won't be stolen

Hey B-man try www.shockreco.com.au they just did mine for the gloria. I haven't tested them as i sold the car and the shocks went with the car un installed cost quite a lot. 150 a corner for basic 300 a corner if shafts need hard chroming. hope that helps!

thaqnks for the heads up! the Nick guy that does work for JB sounds like he knows what he is talking about. Has anyome heard of a warlock 3500 alarm?

head unit and boost controller have been sold All these items are still available FATMAT sound deadening material 50 square feet of it not even unrolled yet. $150 (cost $300) Kicker KX200.2 2 channel amplifier with original birthsheet (states it puts out 295RMS) . $110 r32 front bar excellent condition black $100 standard intercooler + some piping $3.75 standard BOV $20

I am after a car alarm with basic features for around the $400 mark fitted. can someone recommend a place to get a decent alarm fitted, Most of the places I call are monkeys that don't even know the features of the alarms they sell.

I am selling a KX200.2 Kicker amp with birth sheet stating 295rms watts. in excellent condition just no longer needed. $110 this is a bargin! excellent quality amp. I also have 50sq feef of FATMAT sound deadener brand new stil on roll not opened (just as good as dynamat extreme) $150. that much dynamat would cost you $450! both items are in canberra and can be picked up or posted

Don't do it. I increased the dia of an RB20 afm by 3.6mm giving me a mass air flow sensing of 18% theoretical greater than standard and tuned the standard ecu and got scary results. on the dyno it was fine and the resolution was fine. in the real world the car would stall and idle badly on completly random occasions. The VQ map is a tough one to mess around with and is callibrated to 0.01 volts. if you increase/bipass the VQ table is worthless. you will have to redo your entire fuel and timing map. better off getting a Z32 or Q45. If you are going to max it out go a pair of z32s. hope this helps.

sorry for the delay here are the pics of the headunit and the boost controller working. all items still for sale at this stage

that is horrible. hope you get your money back.

Will update with photos of everything tomorrow. Thanks

Thanks! will attack it this weekend. Cheers

I have no Idea have never sent something this big. It would be a biauch to wrap up safely! I will try and work it out for you.

I have a really dirty engine bay and want some advice on the best way to clean it! I don't want to damage the paint. The reason I ask is I have oosed out the engine bay before and got corrosion on all my terminals. Do you use degreaser in a can and then wipe it off?

Dickson here I come. How do they feel about a FMIC and a pod filter and a GTR front bar? they are my only mods I have. I have a stocko airbox front bar and cooler but REALLY don't want to put it all on as it would take me ages to do it all. will it pass with these things on

Hi all, I just bought a new car and do not need the following parts. Greddy Profec B-Spec2 Boost Controller - Silver in excellent condition installed for only months $350 JVC's KD-SHX900 head unit CLICK HERE FOR PHOTOS AND SPECS $250 FATMAT sound deadening material 50 square feet of it not even unrolled yet. $150 (cost $300) Kicker KX200.2 2 channel amplifier with original birthsheet (states it puts out 295RMS) . $110 r32 front bar excellent condition black $100 standard intercooler + some piping $3.75 standard BOV $20 All parts are available in canberra and can be picked up or posted. I am looking for the following things that I may consider for trade: R32 side skirts and pods. GTR or M spec or simular 3" front pipe and hiflow 3" cat R34 Neo turbo Thanks!