R31 POWER

Old moby pitches over HARD. I can't believe those guards just swallow them rims. About time someone drives a 33 gtr like it should and not just to pick up kebabs.

260tech, Whiteline eccentric bushes? If so, that looks like the bolts either failed (unlikely) or simply come loose. I've ran the same on my 33 for over a year and they are fine. I've just bought a stagea that have cusco front camber arms. Both the whiteline eccentric bushes and or cusco arms do a great job. The cusco ones are harder to adjust i reckon.

I would do the cheap and easy things first. Like new BCPR6es spark plugs, fuel filter and check all intercooler joiners/ vac lines.

Does look good and has been for sale a far while.

This thread helped me so i will post pics. 98 S2 awd manual with 18x9.5 +15 235/40 front and rear. Ride height is 360mm front 350mm rear. Guards are untouched. I did have to play with the front camber as the rims were poking about 10mm. I got it down to 3mm. Rear is flush.

CST ZERO 1 HYPER 18x9.5 +15. Fronts will go on once i get tyres.

As said, sounds like an earth problem.

DaveB. Did you end up returning the first Hardrace 33 castor rods? If not, i will buy them off you.

3rd pic you posted, it looks like the valve cover is cracked around the bolt?

Chris32, If the dump pipe has a divider that protrudes past the dump flange, it will hit the built in turbo one. Otherwise, what ever dump fits a stock turbo will fit yours. Personally id hunt down the original spec dump that was available with the gt2535. Pics of it below. http://www.sau.com.au/forums/topic/202920-hks-gt2530-dump-pipe-recommendations/

Abdul11 i got mine from bunnings. Make sure they are stainless steel!

Yes becareful of fake phillips globes, if are paying for phillips prices. Otherwise get china globes but they are hit and miss. My fake phillips globes have been going strong for over 4yrs.

Loving that black front lip with the 4 door indicator/fog lights.

God dam dude!

What the compression ratio now with forged pistons?

Stock boost solenoid can go.

http://www.paulr33.com/powerfc-faq/powerfc-faq.htm#68

Random pic i saved from somewhere in perth. I don't know the size or offset.

Sounds promising Reason for asking is im thinking of going 6boost low mount. I really dont want to hack up the rear housing/ beautiful dump haha. ARTZ, it does have a hairline crack yeah. I noticed it when i got it rebuilt a couple of years ago. Scotty nm35, which ar housing do you have? I was looking at doing what AngryRB did to his housing! http://www.skylinesaustralia.com/forums/topic/426934-angryrbs-r33-street-sweeper/page-2

Turbo guru's, do you think this would fit it? http://www.ebay.com.au/itm/Turbine-Housing-Kinugawa-Garrett-GT3071R-GT2835-A-R-73-10cm-56-5mm-Trim84/291020897812?rt=nc&_trksid=p2047675.m1851&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D261%26meid%3D3436767607632936440%26pid%3D100005%26prg%3D1088%26rk%3D2%26rkt%3D5%26sd%3D291034391697%26 Or even this one? http://www.ebay.com.au/itm/Turbine-Housing-Kinugawa-Garrett-GT3071R-GT2835-56-5mm-Trim-84-A-R-61-8cm-T3-/291034391697?pt=AU_Car_Parts_Accessories&hash=item43c3006491 As far as i know the HKS gt2835 has these specs TURBINE: -Wheel- 84 Trim - 56.5 Major / 51.8 Exducer -Housing- T3 inlet / Outlet spec: -0.68 AR (Mine is 0.68,not 0.87) Kinugawa housing A/R 73 10cm Turbo Turbine Housing ( Fit 56.5mm Trim 84 Wheel) Here is the my turbo id tag

All the ones i've seen have had 2 studs on the bottom holes and bolts for the rest.

^ I got the same ones off him as well

Cheers dude! Fronts are 235/40 and 265/35 rears. Did have -1.5 camber front and -1 rear but it's slightly more now. I only rolled the rear guards so far!

Lowered the old girl and debadged the gtr rims

http://www.weststatetyres.com.au/ They are in Bentley. He has always looked after me!