Bl4cK32

same...if i ever get my car finished Nice shots there too I still have the s15 to fall on if the 32 is ever gone....touch wood

Yer OG speed shop have it on pump ....but yer $1.35 per Lt, or go the toluene like dean said....

We may be witnessing the start of the pro drift scene finally happening in Australia....no more clapped out commies/falcons understeering, and taking the show away from the real talent. -not that there isnt talent here already

He shouldnt have to mate. If its been F*Kd twice, would you go and spend a few hours fixin someone elses shit? No....well he knows where its headed anyways. If its burnt the paint, then yes - it will need to be resprayed. If it hasnt, well a good buff should bring it out. Either way the insurance company should find out, with minimal hassles to Joel to get it fixed...

Due to problems with my RB31DET build up, im forced to sell my Oil cooler kit, which i had planned to go on my new motor It came off a rb20det, but can go on all rb motors - ie rb20det, rb25det, rb30det Comes as i bought it. Unused on my current setup. Trust Grex oil cooler kit includes: 9 row oil cooler braided lines Earls fittings Sandwich block with fittings for oil pressure and temp guages. Very good condition, with straight fins. Any offers starting at $550.....SALE PENDING Can ship interstate, postage is approx $18 I dont care if there is a group buy with cheaper new kits, so don't tell me. This is a GENUINE Japanese kit, built by and for Japanese cars....So you know it will do what its supposed to well thats my story anyway

well well....back at step one

For me trying to think, remember details, or generally trying to move is why friday night sucks.....

Well done...let the mods begin

ring James at D1 Garage here in Adelaide. He was telling me there the Japs make a sender for the unit.....he can get one for you - their purposely built for the r33 box in the r32

edited

The rips comes in kit form with modified cable and throttle body The speedo, as far as i know, is the bottom haf of the r33 one, with the top half ground off. Then they use the GTR top screwed in?...i dunno came out of another 32, so i didnt do jack

i wouldnt try...go to Vic...how can a NSW copper defect you outside his own state anyways?...or have i been watching too much yank tv? ...lol

no it isnt dude....free bump

cmon guys...65 pages long now..do you wanna read that much to end up on solenoids??

Get a 600x300x70 something ie a gtr cooler....dont worry about the steel wheels...just dont overboost it. It will still make more than enough power..... More questions to come no doubt..... btw the previos owner of my car had the turbo (rb20) highflowed it cost $1200...a r33 turbo can be done for i thin $2000 from GCG. Ring them and ask them how much it costs....even with these two mods ie gtr cooler and high flow turbo (the steel wheel thingys) your still up for over $3000....get the picture?

Im sure you could source a good second hand one, or even better get it reco'ed. I think...is it DBA??/....that place that does brakes and clutches....i dunno Friday after work sucks ...well yer, they had new parts for my car. Youd be suprised what you can get new for imports these days....their not so rare now, just make sure you ring around for a cheap price Either that or Transteer...damn fine workshop

Nah unfortunatly i dont. The Bilsteins i got in there now sit above the top of the tyres by 30 mm...these would sit a little higher again. Not overly low....but not std height. They are still on the std springs atm, so lemme know if you want em. I can measure em if you want....

damn....anyone else?

well email nengun for the new price, and take off a couple of hundered for the 2nd hand items....

I have for sale a new Idler bearing to suit an rb20 or rb25 engine. U need to replace one of these when you do the 100,000km major service on your engine. I bought this for my rb30det project, but ended up using two tensioner bearings instead. One of these from a Nissan dealer is $272 - RRP for ONE ONLY!!! I will sell this one for $120 -includes postage anywhere in AUS. SOLD Also for sale is a two pairs (front, and rear) of lowered springs to suit a r32 gtst. Lower than std, but not enough to attact attention from police I removed these, only because i replaced them with a matched set of bilstein suspension. Offers over $150 in Adelaide, or $150 anywhere else in Aus. SALE PENDING

yup Ap Engineering version on the RB31DET. Ive got a mate Using a RB25de (with 26 internals) and he is using the rb20det loom, using the 25de knock and oil pressure sensors. The only difference in the two is the AAC valve i think...check the difference between the two engine sensors (ie rb20 to 25de) to see if there any different. I did and only came up with the AAC valve being different between the two models....and use a rb20 afm edit/ the rb25de and rb20det use the same injectors - top feed red tops...same cc as well i think....

I think You may have been influenced by the dark side there Steve. James finally get to u did he..lol:jk:

R32 came out with the two engines =Rb20det, Rb25de.... I assumed you were putting it in a different type of car other than a skyline.... saying that the sensors might not be the same between the rb25det and rb20/25de...not so sure if they are compaitble, which may mean getting all 25det sensors...added cost I got my Power FC and HC for $1600 brand new...not too expensive. They do come up now and again, and arnt hard to get hold of.

All three - pick the prick in the pic

Son of a bi.... Can i borrow your guineapig suit then?