mungy

The bag is 2 seasons old, I'm no expert but in terms of fashion 2 year old second hand bag = worthless

Keen but only off you will do it for $450 posted to Adelaide 5113

Not sure about the above design there simmo, I think for a rear setup pushing air through the rad won't be as effective as pulling it through as you will create some turbulence before the air goes through the radiator slowing it down, you should mount the fans underneath the rad and have the rad COMPLETLEY sealed between the fans and the ducting to get the best flow through the rad.

Got one sitting on an R34 here, bolts right onto the brackets themselves using the same bolt holes the caster rods use

how are we supposed to identify a turbo we cant see? what about the tag on the CHRA? pics mate pics if you cant find the part numbers.

250 rwkw is not hard or really that expensive, shop around for a second hand highflow turbo, a decent front mount, 3 inch exhaust, 850cc injectors, 044 external pump or 040 internal pump, z32 afm, nisstune or apexi pfc and u will hit over 250 rwkw EASY. guesstimation on prices turbo $400 to $800 Injectors $300 - $500 fuel pump $100 - $150 exhaust $200 - $400 Front mount $150 - $300 z32 $120 - $200 ECU $350 - $700 Tune $600 - $1000 All up $2200 to $4000 and would only cost you $4000 if you just didn't shop around properly. My 33 drift car netted 280RWKW with the GCG XTR S1 turbo, jecs 850cc injectors, 044 pump, z32 AFM, Apexi PFC, hybrid front mount, no name 3 inch exhaust and an E85 tune from Garage7.running 19psi All up cost to me was : second hand GCG $700, NEW injectors $550, Z32 $110, 044 pump $120, Hybrid cooler with piping $200, APEXi PFC $700, free exhaust and $600 for the tune. All up was just under $3000, and I didn't really shop around, just grabbed the items when I saw them for sale.

A slave is a slave, don't waste your money on a nismo one just use a standard R33 slave and spend the money on a braided clutch line.

The air flow over the boot will actually make it harder to suck air through, vents in the quarter glass or panels actually work a little like an air ram getting more air to the rad.

would you be willing to ship it to Adelaide?

ok sounds like a deal, car is in port Lincoln, just drive up there and when you get there send me a message on here.......

Yea I know how to get the fiberglass work done but the problem is it costs a few hundred to make the moulds and I don't have any left lol. Might be cheaper to fabricate it from sheet metal, rivets and auto glue.

looks like vendor accepted 600, now at my yard if anyone needs parts

wow with that cage simmo it looks like the best place to draw the air from for the rad is the quarter panels right under the quarter window not the quarter windows themselves..

wtf......ok ill have 3 of whatever that last post is.. Price on the car?

nope as passed in at $600, apparently the owner wants more fore a bare shell with no rego and no plates.....LOL

There are no pics and It's the only one in aus for a specific reason.....it looks like a Mazda 323 hatch

Holy f*k balls this is cheap, dam u y did u put this up AFTER I buy 3 other cars......

lol would be better off importing a track dedicated car, would cost less in the end.

That s15 is destroyed.....lol it looks like its had a small hit at some point but without looking at a car in person its very difficult to determine, you really need to get under the bonnet and have a good look at the shell for signs of hammer work and welding. Very difficult to say yes or no from one pic

Don't cut the reo mate, they are too rare uncut these days and are worth about $100, if you can hang out I've got a 32 GTR arriving in 3 months and ill do a straight swap. Please dont cut it they are so hard to find uncut.

I'm already sponsoring a few guys in the drift community but wouldn't mind getting behind a time attack car. James if your reading this PM me so we can talk

Not my thread Phil, And I couldn't care less what you think, I have no time for people who blame others for their shit.

Do you hav receipts for all the work done?

Ya your 100% correct, everyone gets ripped off on eBay, no one ever receives their item from international purchases, guess what your headlights were made overseas and so was that front bar, the headlights I bought were in a shed for the last 10 years so I guarantee they are going to look identical to yours.Edit And the eBay link I put up was an example, and if you know nothing about getting an item from overseas here don't post comments about how you can't get it to AUS. And I didn't flame your option, it was a genuine question as to y it didn't look like a genuine item, all you had to do is respond and say yes it's genuine it was getting ready for pain, but no you rambled on about how I might have cost you a sale for some items that you think were cheap but in reality are expensive and more likely to be the reason they didn't sell, then sent me a link to a 4 year old post trying to prove the bar was expensive, pull your head in mate.

Yes they were....but try to find one for sale now, I dare you