Jump to content
SAU Community

Recommended Posts

just curious as to what would win in a race, i no the 4wd would have more power at the engine but if they both had the same power and torque at the wheels, and traction would there really be a difference in a quarter mile time if both setups are identical? thanks guys.

Link to comment
https://www.sau.com.au/forums/topic/100215-same-power/
Share on other sites

i think its clear that a car with the same power and same weight the 4wd would win but im guessing if you set up a rwd decent (even if you set the 4wd good aswell) it would be the same...

1st flaw is the R33 GTS-T is alot lighter than the GTS-4

2nd flaw R33 GTS-T cant use full boost or power to shoot off the line due to loss of traction

3rd flaw see above flaw :)

Link to comment
https://www.sau.com.au/forums/topic/100215-same-power/#findComment-1828431
Share on other sites

Ok i should of asked the question a bit better. Lets say we have a GTS4 and a GTST,

-both cars are modified to wiegh the same

-all gearbox and diff ratios are the same

-both cars are governed to 100hp at the wheels

-both use automatic, with lets say a 3500rpm converter

-both use slicks and dont wheelspin at all

just trying to say on paper if both cars are evenly matched is there and advantage using 4wd. Thanks for the response guys.

Link to comment
https://www.sau.com.au/forums/topic/100215-same-power/#findComment-1830532
Share on other sites

Ok i should of asked the question a bit better. Lets say we have a GTS4 and a GTST,

-both cars are modified to wiegh the same

-all gearbox and diff ratios are the same

-both cars are governed to 100hp at the wheels

-both use automatic, with lets say a 3500rpm converter

-both use slicks and dont wheelspin at all

just trying to say on paper if both cars are evenly matched is there and advantage using 4wd. Thanks for the response guys.

when u come back from fantasy land let us know :)

u sound like sum 1 talking parity from V8 super cars...

see when u say same this slicks that no wheel spin it just doesnt happen cause by that logic they will cross the line @ the same time if both have 100hp both auto both weigh same both u see were im heading there is no differances to make it a race

32 gts4 is turbo

33 isn't.

If all was equal, gts4 wins.

correct but mine has had a turbo fitted hence my profile <<

Link to comment
https://www.sau.com.au/forums/topic/100215-same-power/#findComment-1831613
Share on other sites

sorry to hijack...

what about a rolling start (so wheelspin and traction don't really play a part)?

say 2 cars, both of the same weight, and both of the same power at the wheels...but one is 2wd and the other is awd.

so: 180rwkw vs 180awkw for example...

obviously the awd car is making more power at the engine than the 2wd car. but after all drivetrain losses have been applied, both have the same power

should both cars then be equal? effectively neck and neck?

(this is all hypothetical of course - i'm just interested to hear ppls responses) :blink:

Link to comment
https://www.sau.com.au/forums/topic/100215-same-power/#findComment-1831997
Share on other sites

sorry to hijack...

what about a rolling start (so wheelspin and traction don't really play a part)?

say 2 cars, both of the same weight, and both of the same power at the wheels...but one is 2wd and the other is awd.

so: 180rwkw vs 180awkw for example...

obviously the awd car is making more power at the engine than the 2wd car. but after all drivetrain losses have been applied, both have the same power

should both cars then be equal? effectively neck and neck?

(this is all hypothetical of course - i'm just interested to hear ppls responses) :blink:

i blelieve tha AWD with 280 will beet the 2wd assuming its like a 2nd gear 60kph rolling start

Link to comment
https://www.sau.com.au/forums/topic/100215-same-power/#findComment-1832136
Share on other sites

if they're the same weight, same power at the wheels and same torque, then how is one going to be faster than the other?

but this is a stupid question anyway as you'll never have a rwd car and awd car the same weight/power/torque.

there is an advantage to 4wd. it's when twisties are involved...

Link to comment
https://www.sau.com.au/forums/topic/100215-same-power/#findComment-1833123
Share on other sites

same torque curve, same weight, same shape, full traction = same time.

What Duncan said.

Unless one of the two cars runs dramatically shorter gearing, there's going to be nothing in it from an ET perspective.

Once you rule out 2WD's weight and drivetrain loss benefits against the 4WDs grip advantage, you're going to have to start splitting hairs elsewhere...or the cars may as well be identical.

I would have hoped that this was so obvious that it went without saying, but evidently its not.......

Link to comment
https://www.sau.com.au/forums/topic/100215-same-power/#findComment-1833323
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
    • ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
×
×
  • Create New...