Jump to content
SAU Community

Recommended Posts

just curious as to what would win in a race, i no the 4wd would have more power at the engine but if they both had the same power and torque at the wheels, and traction would there really be a difference in a quarter mile time if both setups are identical? thanks guys.

Link to comment
https://www.sau.com.au/forums/topic/100215-same-power/
Share on other sites

i think its clear that a car with the same power and same weight the 4wd would win but im guessing if you set up a rwd decent (even if you set the 4wd good aswell) it would be the same...

1st flaw is the R33 GTS-T is alot lighter than the GTS-4

2nd flaw R33 GTS-T cant use full boost or power to shoot off the line due to loss of traction

3rd flaw see above flaw :)

Link to comment
https://www.sau.com.au/forums/topic/100215-same-power/#findComment-1828431
Share on other sites

Ok i should of asked the question a bit better. Lets say we have a GTS4 and a GTST,

-both cars are modified to wiegh the same

-all gearbox and diff ratios are the same

-both cars are governed to 100hp at the wheels

-both use automatic, with lets say a 3500rpm converter

-both use slicks and dont wheelspin at all

just trying to say on paper if both cars are evenly matched is there and advantage using 4wd. Thanks for the response guys.

Link to comment
https://www.sau.com.au/forums/topic/100215-same-power/#findComment-1830532
Share on other sites

Ok i should of asked the question a bit better. Lets say we have a GTS4 and a GTST,

-both cars are modified to wiegh the same

-all gearbox and diff ratios are the same

-both cars are governed to 100hp at the wheels

-both use automatic, with lets say a 3500rpm converter

-both use slicks and dont wheelspin at all

just trying to say on paper if both cars are evenly matched is there and advantage using 4wd. Thanks for the response guys.

when u come back from fantasy land let us know :)

u sound like sum 1 talking parity from V8 super cars...

see when u say same this slicks that no wheel spin it just doesnt happen cause by that logic they will cross the line @ the same time if both have 100hp both auto both weigh same both u see were im heading there is no differances to make it a race

32 gts4 is turbo

33 isn't.

If all was equal, gts4 wins.

correct but mine has had a turbo fitted hence my profile <<

Link to comment
https://www.sau.com.au/forums/topic/100215-same-power/#findComment-1831613
Share on other sites

sorry to hijack...

what about a rolling start (so wheelspin and traction don't really play a part)?

say 2 cars, both of the same weight, and both of the same power at the wheels...but one is 2wd and the other is awd.

so: 180rwkw vs 180awkw for example...

obviously the awd car is making more power at the engine than the 2wd car. but after all drivetrain losses have been applied, both have the same power

should both cars then be equal? effectively neck and neck?

(this is all hypothetical of course - i'm just interested to hear ppls responses) :blink:

Link to comment
https://www.sau.com.au/forums/topic/100215-same-power/#findComment-1831997
Share on other sites

sorry to hijack...

what about a rolling start (so wheelspin and traction don't really play a part)?

say 2 cars, both of the same weight, and both of the same power at the wheels...but one is 2wd and the other is awd.

so: 180rwkw vs 180awkw for example...

obviously the awd car is making more power at the engine than the 2wd car. but after all drivetrain losses have been applied, both have the same power

should both cars then be equal? effectively neck and neck?

(this is all hypothetical of course - i'm just interested to hear ppls responses) :blink:

i blelieve tha AWD with 280 will beet the 2wd assuming its like a 2nd gear 60kph rolling start

Link to comment
https://www.sau.com.au/forums/topic/100215-same-power/#findComment-1832136
Share on other sites

if they're the same weight, same power at the wheels and same torque, then how is one going to be faster than the other?

but this is a stupid question anyway as you'll never have a rwd car and awd car the same weight/power/torque.

there is an advantage to 4wd. it's when twisties are involved...

Link to comment
https://www.sau.com.au/forums/topic/100215-same-power/#findComment-1833123
Share on other sites

same torque curve, same weight, same shape, full traction = same time.

What Duncan said.

Unless one of the two cars runs dramatically shorter gearing, there's going to be nothing in it from an ET perspective.

Once you rule out 2WD's weight and drivetrain loss benefits against the 4WDs grip advantage, you're going to have to start splitting hairs elsewhere...or the cars may as well be identical.

I would have hoped that this was so obvious that it went without saying, but evidently its not.......

Link to comment
https://www.sau.com.au/forums/topic/100215-same-power/#findComment-1833323
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...