Jump to content
SAU Community

Recommended Posts

gday guys, just after some help. now i reckon my bottom end is bout 2 go :) (i have a topic posted up in forced induction topic). a few people have said. i put sum engine treatment stuff in there and it stopped the noise for a lil while but started again 2day. so its goin off the road til yeah until its fixed or i find out what it is.

what i was after is advice for who i should take my car to for a rebuild(if it needs it) and also would ya be able to give me sum idea of what it would cost. i know its gonna b thousands.

i would love to b able to do it my self but i cannot afford the time and i dont have the tools to do it!!

thanks heaps for ya help!!!!!

Link to comment
https://www.sau.com.au/forums/topic/100770-rb26-rebuild/
Share on other sites

also guys can ya (if ya have had a rb26 done) give me a idea of what kinda price im looking at. im not really wanting a full on rebuild, just 1 to get me thro, new pistons, rings and rods, and bearing of course...not really after much more than that

Link to comment
https://www.sau.com.au/forums/topic/100770-rb26-rebuild/#findComment-1842260
Share on other sites

Nisspeed do all of Boostworxs machining, they have everything

in house aswell. Had a couple of motors machined by him.

But also have a mate that is killer with Nissan motors and does his

performance stuff at home, and is a engine reconditition by trade during the

day, cluey as and very,very fussy, will be doing my Big RB30/25 build

for sure, I will give you his number if you want to go that way, p.m me

Link to comment
https://www.sau.com.au/forums/topic/100770-rb26-rebuild/#findComment-1844063
Share on other sites

im lookin at jobs on mines hahah, so if i can get 1 then i will go the whole hog with the rebuild...if i cant get it i will just have to have the basics done!

Edited by Turbz_13
Link to comment
https://www.sau.com.au/forums/topic/100770-rb26-rebuild/#findComment-1849353
Share on other sites

naw just swap cars with Keir :P

Keir's Willall racing workshop has just been built.

I am sure Peter will have time and space to rebuild the engine soon.

From what I gathered the stock parts are pretty good. However if you will have the resource to go full out, Keir also got a spare OS 3L engine atm. I am sure if you offer a good price he won't say no :P:blink:

Link to comment
https://www.sau.com.au/forums/topic/100770-rb26-rebuild/#findComment-1850481
Share on other sites

does anyone have an idea of the kinda cost it will be??

A mate of mine just had his RB26 rebuilt at reamac they did an excellant job and my mate and i did most of the work (engine out stripped,back in,etc) and he spent $4500 just on block so it really depends on your budget and how much power your want to have at the end it can cost min $3000 to whatever you want Nisspeed is also excellant

Link to comment
https://www.sau.com.au/forums/topic/100770-rb26-rebuild/#findComment-1876824
Share on other sites

at the mom i got around $5000...looking at saving as much as i can. i want to get 300kw at all four so i would like a decent rebuild. all forgies and n1 rings etc. not really wanting the engine to be bored, just honed. but see what happens, ill have to get what i can afford i guess.

Link to comment
https://www.sau.com.au/forums/topic/100770-rb26-rebuild/#findComment-1878436
Share on other sites

hey mate.

just finished putting the 26 back together in mine

part including new (oversize nissan) pistons/rings, n1 bearings, n1 oil pump, tomei block restrictor (needed for the n1 pump), n1 gasket kit, gates timing belt.

total cost approx. $2900 (trade price - add 10% otherwise)

good luck

Link to comment
https://www.sau.com.au/forums/topic/100770-rb26-rebuild/#findComment-1878519
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...