Jump to content
SAU Community

Recommended Posts

RRR32_Godzilla, what brand short shift kit was it? nismo? i know the nismo shifter is a longer throw than the C'z one. and i can't imagine c'z (or any performance maker) making a shifter that is exactly the same as stock

obviously they wouldn't make one the same as stock, obviously they sent me the wrong one

Edited by RRR32_GoDzIlLa
Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/6/#findComment-1896768
Share on other sites

  • Replies 343
  • Created
  • Last Reply

Top Posters In This Topic

sounds a bit funny to me, i can't imagine them replacing it with a stock one, what brand was it suppose to be?

supposed to be nismo.

i also have a c's shifter in my gtst which is good.

the length of throw on the gtr is the same as standard and the part looks identical to standard. It in no way could be considered a short shifter.

i also got a mates stock gtr shifter to rule out the possibility that it already had a nismo short shifter installled when i bought the car and the standard throw on gtrs just happened to be the same as a mack truck and the nismo shifter made it closer to normal.

Edited by RRR32_GoDzIlLa
Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/6/#findComment-1896818
Share on other sites

Use Greenline.

Stuff leaves Japan the day after your payment goes though.

Easy.

not really, they say it takes 1 to 5 days to send the package after payment has cleared. mine took 4 days to get sent, which is fine cause it arrived a week later.

no complaints with greenline so far.

steve

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/6/#findComment-1897167
Share on other sites

and does anyone know wat the hell harrimasha harrimashaa ( i think thats wat it sounds like ) means?

most probably "Wakarimashita" which means I understand

The Japanese can be a little lazy in their speech at the best of times... I know I do it when I speak Japanese

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/6/#findComment-1897194
Share on other sites

Hello to all

First of all I am very sorry for the delays. I did something that I haven`t done in a long time and that was to take some time of over xmas. Before I left to go on holidays I had some Japanese crew take over for me. All was fine until parts started getting sent to anyway but the intended addresses. Consequently I had all the orders stopped until my return. As I am in Japan now all orders will be sent off in the next few days.

All I can say is I do sincerely apologize for the delays and please dont worry about funds going astray or anything like that.

Best regards

Brent

not happy :(  waiting for 2 months for parts half my order arrived 4 wks ago but still short 2 x camshafts approx $700 4 emails sent no reply dont really know what to do on my invoice there was a phone number but get either a jap answering machine or just get hung up on here is the n.o. if any one can talk japanese 001181928413978 also noticed australian bank details have changed used to be in brent's name now under nengun ??????????????????? $700 bucks is to much to just write off still got my fingers crossed but contact from them would be nice hey

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/6/#findComment-1897355
Share on other sites

Hello to all

First of all I am very sorry for the delays. I did something that I haven`t done in a long time and that was to take some time of over xmas. Before I left to go on holidays I had some Japanese crew take over for me. All was fine until parts started getting sent to anyway but the intended addresses. Consequently I had all the orders stopped until my return. As I am in Japan now all orders will be sent off in the next few days. 

All I can say is I do sincerely apologize for the delays and please dont worry about funds going astray or anything like that.

Best regards

Brent

cheers brent like ive said ive delt with you before and never experienced any problems and now this issue is cleared up i will cotinue to do so :D

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/6/#findComment-1897910
Share on other sites

Hello to all

First of all I am very sorry for the delays. I did something that I haven`t done in a long time and that was to take some time of over xmas. Before I left to go on holidays I had some Japanese crew take over for me. All was fine until parts started getting sent to anyway but the intended addresses. Consequently I had all the orders stopped until my return. As I am in Japan now all orders will be sent off in the next few days. 

All I can say is I do sincerely apologize for the delays and please dont worry about funds going astray or anything like that.

Best regards

Brent

Thanks for the update Brent. Perhaps an update on your website and a mass email to customers with the issues to keep everyone informed. People assume the worst when they hear nothing. Communication makes them feel warm and fuzzy.

I'm waiting on my part still. Reading this post has made me feel a bit more at ease.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/6/#findComment-1898324
Share on other sites

ditto. exactly what ferni said. people instantly lose trust with internet sellers when emails etc aren't replied, and threads like these are the result, not good for your business at all, and at the end of the day a bit of a mis understanding, unfortunately may have cost you a few customers.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/6/#findComment-1898378
Share on other sites

I don't believe this was just an isolated incident due to Brent being away at Christmas. I had similar problems as you guys last august, parts not arriving, then no contact from Brent, and no response to e-mails. Eventually was informed that items had been sent to the wrong address! E-mailing Nengun seems to be a waist of time as I never got a reply from Brent until I filed a complaint with PayPal.

Brent then cancelled my acount so that I couldn't order anything from him again, although that was a waist of his time because I would never use Nengun again anyway.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/6/#findComment-1899420
Share on other sites

Yeah too be honest where theres smoke they'res fire - i wont be using nengun when there are alternatives, specially after reading this tread and others of late. Thats unless i see some turn around with people posting that all the above problems got sorted and some sort of offical apology was issued. Even then i would be sceptical

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/6/#findComment-1900236
Share on other sites

Pffffft...

I ordered an item very early December. Early Jan I decided to cancel the order as i was selling the car so i emailed at least 3 times informing them that i wanted to cancel my order (During these couple weeks, my order stayed "Processing"). I then recieved an email telling me that my order has been cancelled and i should expect to see a refund shortly. I was then satisfied and happy that this went sorta smoothly.

Guess what? I GOT THE ORDER I CANCELLED AND NO REFUND!

That's well over a grand WASTED. Are they going to do anything about it? NOPE.

Not happy. Never Again.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/6/#findComment-1901221
Share on other sites

just outa curiousity how did you pay for the parts nipples? and did you leave bank details for refund to be deposited into

direct deposit....

got an email saying "Apologies for the mixup. The refund has been processed, can you please confirm that it has been received."

this is after my 3rd email about a refund.

i then waited, til i got an "Order Complete" email. that's when i started worrying again.

checked the email and the item was already at my local post office in the tracking!

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/6/#findComment-1903726
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
×
×
  • Create New...