Jump to content
SAU Community

Recommended Posts

got my 89' automatic r32 rb20det skyline dyno'd today

K&N pod filter(no heat shield)

r34 smic(1 of the pipes keeps popping off)

3" combined dump & front pipe and 3" hi flow cat from BATMBL

3 1/2" JASMA cat back from Japan.

$22 manual boost controller

r33 turbo 14psi(drops off to 11psi)

apexi safc tuned by HITMAN

was done in 4th gear

143.9rwkw

my first ever dyno with the cat back and pod filter i got 127rwkw(was done in 3rd gear)at Silverwater Automotive Services

both dyno sheets r displayed using my camera fone

the before(red line) on the HITMAN readout says 126rwkw

thats with everything minus the boost controller and safc.

post-16944-1139902973.jpg

post-16944-1139903092.jpg

Edited by RSTME

VH Commodore, R32 RB20DET

Std engine and turbo,

quiet 3" exhaust,

400x300 K&J cooler,

EMS computer

163rwkw @12 psi on JPC dyno

12.90 @ 111mph with stiff circuit spec suspension, old Advan tyres.

Fitted HKS T300 turbo and Tial 38mm gate, made huge difference. estimated 200? rwkw @ 18 psi. Will dyno soon.....

1993 RB20DET stock internals

3 Inch Turbo Back Exhaust

GTR Front mount

Stock Turbo

POD

Turbosmart Bleed valve

98 octane fuel

Power FC Tuned by Unigroup

166Rwkw 1 bar boost

Edited by Dave69001

R32 1993 GTS-4 Turbo

Standard RB20DET

Standard turbo

Standard computer

walbro 500hp fuel pump

3" turbo back

K + N Filter

stock boost when dyno'd and got 145rwkw on a 42 degree day

now i have installed front mount and upped the boost to 1 bar

I have a boost controller and I used it at three different levels

so at 14 PSI:

wheel crank

hp 265 335 @6250

tq 230 285 @5000-6000 Smile

__________________________

at 14.5 PSI:

wheel crank

hp 270 340 @6500

tq 240 298 @5000-5750

______________________

at 15 PSI:

wheel crank

hp 280 355 @6500 that's 208 RWkW

tq 260 315 @4750-5500 352 RWNm

dynorun3.jpg

Old ass blitz SBC boost controller

HKS GT2535 turbo

(N1?) GTR FMIC

Tomei Built RB20 2.2L with cams and all

GTR Injectors and Fuel Pump

3" catless RS*R exhaust

Z32 MAF

94 Canadian Octane gas

the tune is quite rich

You guys think it's the turbo/cams/injectors that are running out??

this turbo is rated 350HP which I'm at :S

Edited by klys

1986 200ZR NICS RB20DET

3" Turbo Back Zorst

Pod

R33 Turbo

SAFC2

Supra FMIC, 2" piping

Stock Fuel System (injectors, pump etc)

Turbotech Bleed Valve, set to 10PSI

144.1RWHP (108KW) sad, I know :no:

AFM hits 100% utilisation @ 5500RPM and everything goes to shit after that.

Edited by 200zRRR
  • 2 weeks later...

Yo, my car is an A31 Cefiro with an R32 RB20det

Mods:

HKS Pod

3 inch exhaust

600x300x100 cooler

Custom inlet plenum (copy of jun surge tank)

Garret GT25 400hp turbo (0.64/0.70)

tuned length stainless high mount manifold

tial 38mm gate.

GTR Fuel pump

550cc S5 injectors

Sard Reg @ 40psi

RB20 AFM mounted in 4 inch intake pipe

Power FC

Just got back from tuner 2nite & the results were: 258kw@ 18psi (dynapack chassis dyno) supposedly it works out to 406hp @ the flywheel.

Lastest tune and mods

1992 R32 gtst

rb20det stock bottom end (65000klms)

hks cast exhaust manifold

hks 35mm external wastegate

hks adjustable cam gears

hks 264 cams 9mm lift

600x300x76 hybrid intercooler

malpassi fuel reg

sard 550cc injectors

ported and polished head

catco high flow cat

custom 3' dump

hks 3.5 exhaust

garrett GT3040R turbo

Haltech ecu e11v2

Made 281.8 rwkw @22psi

R32 gtr fuel pump

post-7066-1143094963.jpg

cheers Peter

Edited by legend01

hi, unfortunaletly i don't have an electronic copy of my dyno to post up, but here are my mods and result.

1990 R32

Standard rb20 internals

rb25 series one turbo on stock manifold (using rb20 wastegate actuator)

quiet 3 inch zaust, custom dumppipe

k&n pod in cold air box

stock AFM

Retuned ECU

14.1psi - via an E-Boost

300x600x76 bar and plate (no brand) intercooler

custom intake manifold (front facing throttlebody)

460cc rx7 injectors (non turbo)

proSport fuel regulator

standard recirc BOV

192.6 Kw's at rear wheels on torque performance dyno (i think temperature was 23degrees.)

i just picked up my line, so thought i'd put up the details (not much to brag about though) ;-)

1993 R32 GTS-T (5 spd)

RB20DET (wrecker engine - standard internals)

stock RB20DET turbocharger & dump pipe (stock boost)

stock exhaust and inlet manifolds

stock AFM

stock injectors, etc

stock intercooler & BOV

3.5" aftermarket cat-back exhaust

K&N pod filter

Apexi PFC - conservative tune

132 rwkw @ stock boost

p.s. i have bits sitting at home waiting to go on to get this thing boogying

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...