Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

Had my r32 dyno tuned today.

Hypergear atr43ss1 turbo with tial 38mm external wastegate

Hybrid side mount exhaust manifold

Cooling pro return flow intercooler

Jjr 3 inch turbo back exhaust with high flow cat

Bosch 550cc injectors

Bosch 040 fuel pump

Nistune

Pod filter

Made 297.6hp at 18psi of boost

A little lagier than I was hoping but it pulls well on full boost.

  • 3 weeks later...

89 gtst

jjr/kkr430

gtr injectors

gtr pump (i think)

z32 afm

China cooler

full 3 to 3.5in exhaust

Dr drift remap (from another car , was put in just for a temporary thing)

226.1rwk @20psi

Edited by toffy
  • 1 month later...
  • 3 weeks later...

1990 rb20det 180xxxkm

Stealth Return Flow Intercooler

High Flowed Steel Wheeled 34 Turbo

3inch Turbo Back

Split fire Coil Packs

K&N Pod

Standard Intake

Walbro Fuel Pump

Boost T set at 1bar of Boost

Standard Computer

259.7hpatw/193.6kwatw

  • 2 weeks later...

1993 rb20det

150,000

fmic

power fc

z32

stock internals

800cc injectos

walbro fuel pump

3in dump to straight through

14 pound

apexi ax5370b

163kw :(

Edited by thomas.mcsherry
  • 1 month later...
  • 3 weeks later...

post-41809-0-30265100-1365998356_thumb.jpg

Ran my rb 2.2 for 4 years of solid drifting over 60 events in various stages from 98 ron to full e85 and a heap of different turbo and power setups, below is the last dyno and finally a main bearing went a couple of weeks ago so sold it off... but will put up results. prob forget a bitta stuff

Dyno was a hubber: 550hp and 600 nm at 23psi on full e85

Rb22

port and polished head

race springs

HKS 264 in / ex cams

Adj cam gears dialled in

rb25 crank rb26 rods

arias forged pistons 82mm

cosmetic metal head gasket

extra capacity sump

splitfire coils

vipec v88 ecu

1000cc ID injectors

full fullsetup, braided lines walbro lift pump 2 x bosche ext

aeromotive filter + fuel pressure reg

plasmaman plenum

greddy intercooler

greddy oil cooler setup

PWR rad

6boost

Gtx 3076 .82 rear

Tial 44 ext gate

rb25 box

both extreme and exedy clutches used

custom exhaust 3" to 3.5" twin pipes straight through

restrictors in head, massive head to sump drain, breathers from covers to catch can and drain back to sump

etc etc

Hey all, my r32 gtst type m '93

Standard engine internals

Stock Coilpacks

Stock injectors

Unknown turbo back exhaust 3inch/4inch tip

T04e turbo 18psi

Big FMIC

Gay pod filter (WTB stock air box)

Turbosmart wastegate w/ screamer... Ha :/

Manual boost tap

HKS BOV to atmo (making car stall like a bitch)

Tuned by ChipTorque

208kw... Yet to install Yellow Jacket coils and 550cc injectors and Turbosmart Kompact plumb back BOV

  • 2 weeks later...

WP_000375_zpsae91f62f.jpg

The RPM scale is a little off on the dyno also done to SAE correction on a Dyno Jet. The pulls were made to 8k rpm max boost was set to 18psi on 91 pump gas. The RB20 is in a S14. Wish I wasn't so scared to go over 8k :(.

Persicion SC61 turbo with stage 5 exhaust wheel

Griffen FMIC

Tomei 270 cams

Tomei valve springs

Tomei head gasket

ARP head studs

AEM S2 EMS

HK$ evc 4

Apexi GT spec exhuast

Sard 800cc injectors

Supra TT fuel pump

Rips intake manifold

Blitz dual surge BOV <~~~POS

  • Like 1
  • 4 weeks later...

'89 R32 GTS-t

Greddy FMIC

HKS filter
HKS low mount exhaust manifold
HKS wastegate

HKS 3" TBE

KKR430

Z32 AFM

444cc GTR injectors

BOSCH 040 fuel pump

237.6kw on 19.5

Lost the dyno sheets :( but it was done at PowerTune in Sydney

R32 gtst RB20DET

Deatchwerks 650cc injectors

Deatchwerks 320 lph fuel pump

Yellow jacket coils

Z 32 afm

bellmouth dump & 3 inch all the way

big fmic

Nistune

Rb 25 turbo @ 14 psi

180 killerwasps on a safe tune ( a little rich)

post-89755-0-00990000-1369905316_thumb.jpg

  • 2 weeks later...
  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
×
×
  • Create New...