Jump to content
SAU Community

Skyline Big Brake Kits Pictured

pistonfreak
 Share

Recommended Posts

Topaz Grand Master

Topaz

Posted
Posted

Wow, they are some nice brakes....

I got DBA4000's fitted to my car not long ago and i have to say they are much better than my old, warped brakes. They werent standard R32 GTR brakes I dint think because the were cross drilled. These look so poor compared to those AP's and Brembos :domokun:

dba40008mx.th.jpg dba40018fk.th.jpg dba40029bv.th.jpg

  • 1 year later...
T04GTR Grand Master

T04GTR

Posted
Posted

hey brian. thanks heaps for sorting out my teathing problems with my f40 brembos and your custom 355mm two piece rotors on my gtr.

still shakes a little but is bearable.

ps. im getting some k-type alcons to replace the brembos so i can sell te old set up as a complete kit.

PSI_GTSII Experienced

PSI_GTSII

Posted
Posted

I have a set of Brembo F50's (355mm) on my R32 GTR and they are a $5000 proposition for the fronts only.

Bremb01.jpg

Brembo1.jpg

Definate improvements in feel on the track however standard Brembo pads seem a little more road than track orientated.

djr81 Grand Master

djr81

Posted
Posted
What type of aluminum are AP calipers made from? Are they forged? heat treated? cast then machined or billet?

They are a 2 piece caliper. So the material grade is less important than for a 1 piece as the steel through bolts are ALOT stronger & stiffer at elevated temps.

Try the APRacing website.

ferni Grand Master

ferni

Posted
Posted
Brian, What would you use to duct cool air to the rotors, mine seem to get hot and cause a bit of fading by the end of 3 hot laps.

Cheers

Paul

Good question, i'm interested in ducting as well..... and what people have done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • GTSBoy
      R34 Handbrake light saying ON and intermittently flashing

      By GTSBoy · Posted

      Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • Duncan
      R34 Handbrake light saying ON and intermittently flashing

      By Duncan · Posted

      ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • Duncan
      R32 GTS (RB20DE) Injectors Replacement

      By Duncan · Posted

      OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...