Jump to content
SAU Community

Recommended Posts

-wouldnt a front diff and a rb25 single turbo give it away faily easy ?

I don't know how you'd spot the front diff on the road seeing as its nestled nicely in the oil sum under the engine.

Things to look for would be 4 wheels spinning when taking off and the torque split in the cluster. R33 GTS4's are all N/A and R32 GTS4's were all turbo. I guess to a certain extent if you check out the wear on the wheels of a GTS4 it should be more evenly worn (theoretically that is, ATTESA however isn't fulltime AWD though) also compared to a GTSt, GTS4's tend not to oversteer as much.

oh you mean out on the street driving , not inspection. as in mock ups etc !

i could be a smarty and say not 4 wheels spinning on take off but a combo of 2 rear and 1 front alternating but as you can see i didnt even get the engine right ... :) so i will shut up and say thanks.... i leaned something

If you destroy a motor in a GTS-4, do you have to replace it with another motor from a GTS-4?

its easier and cheaper to... noone has a use for AWD RB20DET's :P as they only fit AWD R32's, A31's and C33's. If its just a damaged head you can replace it with a GTSt head. I think the block might need modification to fit. Oil sump and front diff need to be swapped for sure, or you could use a GTR one (grab one off someone who's putting an RB26DETT into a RWD car for cheap).

I believe you just have to pull the 4WD fuse out on the R32s.

or wire up a switch to the fuse and have a "slide beyotch/grip beyotch" toggle switch in the cabin :P

So you reckon GTS-4 motors are cheaper than normal RB20's?

should be. I mean, if you had a R32 GTS4 wreck and no one wanted to buy the engine, you'd sell it cheaper so someone took it right? Cars that AWD RB20DE's feature in, in general are rustheaps (as most of them were used in snowy areas in japan... hence the need for AWD) so its not like there's any shortage of spare engines.

And if you can't find an RB20DET, then put an RB26DETT in, or an RB25DET out of a stagea (which is pretty tricky, but doable).

Is it easy to turn the front wheels off?

You can also just flick the ingition off and on while rolling (faster than 5km or so). disable the ABS and 4wd (same as fuse)

Then its the same as a front heavy gtst...

Don't get me wrong... its not easy, an RB26DETT swap is easier I reckon.
RB25DET simply bolts straight in. And everything mechanical connects up. At least you don't need a new exhaust and intake setup.

Either engine, you need to re-loom and re-ECU it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
×
×
  • Create New...