Jump to content
SAU Community

Recommended Posts

I'd like to hear about performance loss that apparently happens. If it's the case that there is a performance loss, then I stand corrected.

As far as I’m aware you won't lose any performance, but at the same time you will only gain from the use of one if the car's engine is modified... and most of the gain will be in engine wear.

Personally I think it just attracts the wrong type of attention (the fuzz), and isn't really needed for any sort of day to day driving. If you want to be seen... set that money aside for something visual (not that that’s my thing either).

Don't listen to all these haters. The sounds you can get are:

1. Pssssttthhhh

2. Pssthhfoofoofooofooo

3. Psrrtfoooossssssstshhhhh

4. Waassssshooooommmmff

5. Pizzzzooooo

and finally everyones favorite at the moment.

6. pooosssshhhhchooofooof ooof ooof.... ooof

I recommend installing two or three of them at once so you can get what they call BOV harmonies happening.

Oh and the best brand on the market is obviously got to be the Brotec. Suzuki wouldnt have chose them as their factory BOV supplier if they werent awesome.

if u could pick any BOV wat would u guys get?

for a 34 gtt

No argument - HKS Racing Type II Blow Off Valve.

THE sexiest bov on the market, and able to be plumbed back into the intake to get the cops off your back!

Just make sure you're running at least 14psi to activate it! :P

put a horse in ur car and poke it with a sharp stick wen u change gears

:lol: :lol: :lol:

Gotto love it!!

And thanks to Sewid, who got the list of sounds before I got to read the thread.

Wonderful!!

By the way, guys, if you are having trouble choosing a BOV, then here is a tip for something to fill the gap while you are making up your mind or saving up your pennies:

1. Take MP3 recorder/player;

2. Take trumpet mouthpiece (as in the musical instrument);

3. Attach to empty toilet roll or empty GladWrap tube (depending on desired note);

4. Eat beans;

5. Lots of beans;

6. Stick trumpet mouthpiece and GladWrap tube assembly up your backside;

7. Record results & play on super doof-doof system in your motor.

Easy - peasy!

Cheers! :P

Don't listen to all these haters. The sounds you can get are:

1. Pssssttthhhh

2. Pssthhfoofoofooofooo

3. Psrrtfoooossssssstshhhhh

4. Waassssshooooommmmff

5. Pizzzzooooo

and finally everyones favorite at the moment.

6. pooosssshhhhchooofooof ooof ooof.... ooof

I recommend installing two or three of them at once so you can get what they call BOV harmonies happening.

Oh and the best brand on the market is obviously got to be the Brotec. Suzuki wouldnt have chose them as their factory BOV supplier if they werent awesome.

:D

Ive got 7 Brotec BOV's. If it was for Jimmy's mates cousin at Brotec i dont know what i would do! OMG Brotec are the best! :P

SK has explained this a few times i have seen, the does and donts of aftemarket BOV, if you going to do it, just buy a plumbed back so your car wont stall everytime you take you foot off the accelerator. OK the car is turned for plumb back system. Eg stock.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...