Jump to content
SAU Community

Recommended Posts

its munted, if it boots again be ready to get all the files off it quick smart.

data recovery programs usually only work if the drive works, try booting using Heirin (sp?) it has tools to fix up all major brand hard drives, might get her up n running again

i have a few paper weights like ur drive

I used to work in a computer shop and we used to wrap the drive in newspaper and chuck it in the freezer for 15 minutes or so. This seemed to give them a limited life to do some last minute grabbing.

I used to work in a computer shop and we used to wrap the drive in newspaper and chuck it in the freezer for 15 minutes or so. This seemed to give them a limited life to do some last minute grabbing.

That trick is limited to only a few models. Basically Seagate and a couple others started using a cheaper substrate for the IC's. Only problem is, once the substrate warmed up to 60'c, it became conductive causing a huge short circuit inside the HDD controller. Putting it in the freezer would cool the chip long enough to transfer any data off and onto a new drive.

-D

Luke I wouldn't even bother trying to boot off it again, you might really stuff it.

Pull it out and stick it into a machine that already has a boot drive and operating system in it then drag files across.

+1 to this. Your drive may only have an issue with the partition table. If you run a scandisk on the HDD from another drive you can sometimes recover it. At the least you'll want to find out if there are any reported errors from the drive itself.

-D

That trick is limited to only a few models. Basically Seagate and a couple others started using a cheaper substrate for the IC's. Only problem is, once the substrate warmed up to 60'c, it became conductive causing a huge short circuit inside the HDD controller. Putting it in the freezer would cool the chip long enough to transfer any data off and onto a new drive.

-D

We use that trick as well

but the HDD in antistatic bags and leave it in the freezer over night

and surprise surprise you can get possibly 30-45minutes of proper activity happening and get most data off that

after the 3rd or 4th time the HDD will be just as good as being under a 10 tonne press lol

thats how we destroy our work HDD's b***hes

might just be the MBR, does it get past post at all? if so u could fix it useing the windows disk

if it booted it wouldnt be MBR. MBR either works or doesn't.

Corrupt file tables will cause sporadic boot failure as data is written in places where it shouldnt be, or data is read from corrupted blocks.

-D

  • 2 weeks later...

^^^ I've got the Logitech Pro9000 web cam - inbuilt mic, HD quality and great for skype HD video calls. Also, has some novelty features that your kids will like eg. a character face overlay that mirrors your expressions and face tracking. But, for something cheaper the Logitech S7500 has similar features to the above except no auto focus and slightly lower mp camera.

hrmm....I really like the twin pack idea and price of the Swann but I also like the hi-res capabilities of the Logitech Pro9000 & Orbit (Sphere) models

My vote is with logitech, since I've been using them for a long time. Theyre rock solid

-D

EB Games are having a massive sale atm fyi. Many games and other items are 2 for $50.

I picked up Assassin's Creed and Crysis Warhead for a grand total of $50 yesterday. Bargain - especially since Assassin's Creed was still priced at $89.94 and Warhead at $49.95.

Now I say good bye to another large chunk of my rarely available free time :D

^^^ I've got the Logitech Pro9000 web cam - inbuilt mic, HD quality and great for skype HD video calls.

+1, I have two of these, one for home and the other for work / on the road.

Great unit, never had any issues, GOOD quality video, not like most cams I've seen.

Not cheap, but webcams seem to be an item where you do get what you pay for.

hey Chops we should do another beer with Andrew sometime.

thanks for all the responses guys, I've checked a few reviews and am definitely leaning towards the logitech (buy it once I suppose)....just have to decide whether to get the Pro9000 or Orbit (Sphere)

If anyone here uses steam, just be careful of someone with the username Mor.B.Z.Wojtaz // zagram mixa // and if you get sent a link to here http://newsteams.tk/ - DO NOT LOG IN, its a scam website to steal your steam details. A mate received a message from him saying he had won a free copy of left4dead and GTA4, and to claim log into that site, but hopefully everyone here is smart enough.

Also on a side note, Pete, how are those hard drives?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The spray cans were in the "Kiln" room whilst I was preping the parts,  so probably around 2 hours to get them warmed up, the kiln room has 3 small ovens running at 100°c, 3 medium sized ovens running 100°c, and the large one I used running at 80°c, the room itself was about 28°c, I also spent a bit of time taping up the parts in the room as well, and by the time I was done I would assume that the parts were around that 28°c As for power, I expect a couple of Killerwasps up high would be achievable with the current mods, I'm still running the MZR 2.0 intake and throttle body, and there is a slight mismatch with the 2.0 intake (smaller) and 2.5 intake ports (larger) on the head, this intake is matched and specifically designed to fix this issue with the ports mismatch, the throttle body is also a couple of mm larger, OEM is 65mm, the Bosch is 68mm In the end it will look "prettier" than the molded plastic thing that is the OEM MZR 2.0 intake As for the LSD, it's the OEM Torsen which works fine for what I use the car for, plus, basically no maintenance apart from the occasional oil change
    • I was at Tunehouse in Marrickville (great team over there really know their VR's) , and I spotted this Very clean R35.  
    • Mate , I have the same issue right now with the exhaust noise , if you can tell me what your local guy did , I'll talk to my guys and see if they can do the same. Power is good but it just too loud when put it down. 
    • The other trick I've found with wrinkle black is to put the can in hot water for a bit to warm the paint up, and to pre-heat whatever you're painting. It'll be interesting to see if you pick up any power with the intake, following with interest. Got a proper lsd for this?
×
×
  • Create New...