Jump to content
SAU Community

Recommended Posts

Anyone who's having problems with their pictures displaying, please post in this thread here: http://www.skylinesaustralia.com/forums/in...howtopic=166435

So we can try and figure out why it seems some people can see the pics fine, while others can't.

-Insu

  • 2 weeks later...
  • 2 weeks later...

Did this one yesterday, there was alot of build up in the idle screw. Clean the lot with coton wool, then used the air gun to dry it all off...

Only problem i had was the hose at the bottom, what a pain that was to get off. Other then that it was all good

Nice write up :bunny:

  • 4 weeks later...
  • 2 weeks later...
  • 5 weeks later...

Well this is my first post but I have to say what an execellent thread. Thanks for effort you put into this. I have been having idling problems since I had some new parts on the car I will give this a try first chance I get. Thanks a bunch from the UK Insu, I just hope the R33 GTR is similar to yours. :)

MidNite

ok stupid question i know but how far do i turn the idle screw in on the car (not the cpu) after i have cleaned it?

I have completed eevey step but not sure of where to set it to start the bottom steps (if u follow)

thanks

seems my car does not adjust its idle???

i tried screwing in/unscrewing the idle screw on the aac valve, nothing happens... sits at 900rpm

disconnect the TPS connector, does nothing.... still sits at 900rpm

what could be wrong?

Just another member saying this is an excellent guide! Did my car over the weekend and worked a charm, has never run so well. Mine was so filthy im not surprised that it made such a difference.

Cheers!

  • 4 weeks later...
  • 3 weeks later...

WOW this write up is sweeeeett!!!!!! iv had my r33 for around 10 months and im ready to burn the damm lemon over and over again!!! i have had idle problems from the the day my warranty ran out even total random cylinder miss fire iv spent roughly over $5,000 replacing part after part etc...etc.... but hardly no progress but i havnt tried this yet by chance the gods have forgiven me and this finally puts an end to my sorrows cheers keep you peoples posted

  • 3 weeks later...
  • 4 weeks later...

Your problem is with the IAC valve. (cold start idle up)

Its located on top of the inlet manifold roughly below where the throttle body resides.

The spring can flick off and result in a constant high idle. OR it becomes gummed up and sticks a little.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...