Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...
  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...

white r32 gtr by TRP c16 and mickeys 10.02@143 . pump fuel 23 psi and 245 x18s 11.02@129 on the brakes so as not to get kicked out but they still showed me the back gate.Dont want to cage but might have to as im addicted.Tony rigoli performance 3 ltr stoker and t51r and stock gearbox.

13.499 @ 105.32MPH

1st time at drags ,

Factory ECU

Running 9 PSI with GT3071R

wow...id certainly be looking for an a/market ECU asap if running a turbo like that Glenn...

WSID 01/07/09

[email protected]

Street tyres first time :(

top stuff Bert, that mph is pretty decent mate!!!

Once you get a bit more practice, maybe some better tyres - if you can get ya 60ftr's down to 1.9 - 2.0. your mph is good for flat 12/low 12's...maybe a very high 11!

It was a while ago but my PB in my S13 is 10.65 @ 137mph, 1.96 60ft.

SR20DET, T88-34D 29psi with pump fuel and toluene mix.

Nissan Silvia on MT ET Street 255/50/16 Radials. Looking to break it again within the next couple of weeks!

PJ

  • 3 weeks later...
  • 3 weeks later...
  • 2 weeks later...

WISD 5/8/09

R33 GTR V-spec

11.454 @ 131.25mph

60' @ 2.041

On 235x35x20 Nankang's (WHAT IS TRACTION....LOL) :(

Only my second visit in 18 months, was there for fun and had a ball. The car was loaded with tool box, big stereo, spare tyre, and a set of golf clubs....lol. Does this class as full street trim or what...lmao They kicked me off and said I need to get an ANDRA licence....more money...(does the spending ever stop, I think not!)

  • 3 weeks later...
  • 4 weeks later...

First time out,

R34 GTT, FMIC, Full exhaust, Toshi ecu tune, running 10.5psi

255/35 R18 Nangkangs=no grip.

13.701 @ 108.5mph

Its got more in it i just got to get it of the line and put the boost back on 12psi where its tuned to be.

Can't wait to go again.

  • 3 weeks later...

R32 gtr with $40 second hand Dunlop Le mans tyres WSID 11.8 @122.8MPH, had bad front axle tramp could be the shitty tyres i was using getting some Mickey Ts and should run a low low 11.hopefully. Stock rims 225x50x16. PFC,Pods, zorst and steel wheel turbos.

Next time should be better as i found out even with AWD shitty tyres will let you down. :)

  • 1 month later...

12.8 first time out to eastern creek...

trap was 0.48

and 60ft 2.10

turbo hks 2835 pro s.

full street trim with 225/45/17 federal 595's.

going for more boost and a tune to hold boost uptop then hoping for early 12's.

Edited by allthewaytotheskyline

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...