Jump to content
SAU Community

Recommended Posts

just wondering what turbo would be best on a auto r33 25t

i would like a turbo that kicks in the low rpm towards close to redline

because auto wont even let me rev it close to redline

it just changes gear on its own

any auto SAU's that has had experience with this problem?

i was more looking into a HKS 2530? kicks in at 35k rpm

Link to comment
https://www.sau.com.au/forums/topic/111348-which-turbo-is-best-for-auto-r33/
Share on other sites

I have a 2535 on my Auto R33, its a great turbo, peaks around 6500 with

tons of midrange, only a few hundred RPM more lag than standard turbo, you can barely feel it

I have that same problem atm though, sometimes after a few runs, the auto gearbox just shifts earlier and earlier. I have no idea why. So I get a great first run but it just gets worse after.

yea I have a transcooler and valvebody upgrade

didnt solve anything, during the install changed the fluid, and filter

problem still there, Im trying to install oil temp gauge to keep tabs on the auto box temperature, but having problems finding fittings for it

I have a 2535 on my Auto R33, its a great turbo, peaks around 6500 with

tons of midrange, only a few hundred RPM more lag than standard turbo, you can barely feel it

I have that same problem atm though, sometimes after a few runs, the auto gearbox just shifts earlier and earlier. I have no idea why. So I get a great first run but it just gets worse after.

I cant imagine what your new RB30DET is going to be like with the 2535,tow a road train.

Recommend a highflow, There are two types, GCG do one with a BB cartridge, retails for around $1650, The other is a new bush bearing cartridge, Retails for around $1350. You retain standard plumbing & ducting.

Have done this upgrade on a couple of customer cars and they retain similar boost threshhold but pull right through revrange. your auto issues probably warrant a full manual valve body. Do the turbo upgrade fist, and go from there.

just wondering what turbo would be best on a auto r33 25t

i would like a turbo that kicks in the low rpm towards close to redline

because auto wont even let me rev it close to redline

it just changes gear on its own

any auto SAU's that has had experience with this problem?

i was more looking into a HKS 2530? kicks in at 35k rpm

i have a r33 turbo on my auto 32gtst. + SAFC

no problem pulling to redline.

the problem was it wasnt changing quick enough before redline and therefore just hit the limiter.

this problem will be solved very soon as my g/box is being rebuilt much much stronger

at what rev does the gcg hi flowed turbo's kick in?

is there any site to help me on this?

i was more thinking on hi flowing but last thing i want is a laggy turbo that goes off for a bit then my car changes gear... no benefit at all

  • 4 weeks later...

aquariuz6 - you have posted a number of threads in the past month.

In each one you are asking something totally different, or very similar questions

http://www.skylinesaustralia.com/forums/in...opic=114538&hl=

http://www.skylinesaustralia.com/forums/in...opic=111757&hl=

http://www.skylinesaustralia.com/forums/in...opic=108123&hl=

http://www.skylinesaustralia.com/forums/in...opic=108131&hl=

You need to set a goal and stick to it

Then read the RB25 Dyno Sticky and see what works for you.

If you then compare the turbos yourself, and plug that against the goal that you end up deciding on.

Im not trying to be rude or anything, but we cant really help you, if you cant decide and then stick to it.

As RB Power said, you have an auto, if you get the right convertor you wont loose bottom end as much

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...