Jump to content
SAU Community

Recommended Posts

  • Replies 234
  • Created
  • Last Reply

Top Posters In This Topic

Jay,

Significant gains in the low and mid range with ignition control combined with the big gains from fuel control up top make it a pretty nice package for the price. As for percentages they vary depending on your mods but 10-20 % average should be achieveable.

Doc.

  • 5 weeks later...

Part Number: No.15900903

Description: It is the adapter which prevents that ’xŠp compensation of the ignition time by the knock sensor is effective too much.

The signal line and ground of a knock sensor are wired.

It corresponds also to vehicles with two knock sensors, such as 6-cylinder vehicles.

Hi guys im new to the forum, nice to be part of the international Skyline scene! I have a R33GTST with HKS Super Powerflow induction, Trust downpipe, cat bypass and HKS super Drager exhaust. I`m going to be adding the E-Manage ecu soon and wonder what sort of BHP and general performance gains I would get running 0.8 bar?

  • 1 month later...

Hi all,

I'm currently using an e-manage on the CA18DET in my RS13. It works really well.

The software is very easy to use but you really need a wide-band lambda setup or rolling road tune it properly.

The airflow meter change facility allows you to swap the standard airflow meter for another one of the same type, I'm using a Z32 TT MAF with 460cc injectors at the moment.

A few weeks ago I started testing a 'blow through' setup on the CA18DET which has the MAF fitted between the throttlebody and intercooler. I got it running within 10 minutes and after a couple of hours of mapping its running well which shows how flexible the E-manage is

I'll be using the e-manage on my RB25 when it goes in the car in January and if we can get the blow-through setup working well on the CA I'll probably carry it across to the RB. :)

I finally put the e-manage in my R34, everything is going great so far. I also used the Field 'one touch harness' with it, made life 100% easier by not needing to do all the soldering while hunched over in the car :)

Sorry Ed didn't end up needing the ignition harness so can't comment on the whole coil frying thing.

From plugging it in I have noticed a slight difference in the shifting of the tiptronic gearbox.....it was tiny bit jolty between gears at very low RPM, now it seems to have disappeared?

Should have some larger injectors (~40% bigger) in the car by the end of today, so I'll see how it handles those.

Dan

I also used the Field 'one touch harness' with it

Where did you get this and how much? we're having great difficulty sourcing the plug in harnesses for those who don't want chopped wires...

Doc.

You can plug it in straight out of the box, just as long as you set the three selectors behind the front panel...this just let's it know your cylinder setup, airflow meter etc...basically what model car you have.

As it isn't programmed..it just runs your stock factory settings.

I can’t see why it wouldn’t go on an R31, it uses an ECU and anything with an ECU (as long as you know the pins) can be hooked up to the e-manage.

I’m currently trying to find a harness to suit the R31, so I’ll keep you up to date

Dan

  • 1 month later...

I am excited after reading this thread. Before I sold my turbo maxima, I had purchased an E-01 (which I used and worked well), I also had purchased, but never installed, an e-manage. With my s13 r33GTR swap, I cant wait to get the e manage installed. You guys will hear back from me when that part of the game rolls around...

-ctn

No probs, mine is an auto as well.

There isn't much opitions out there for us auto guys and I think e-manage is the way to go considering the cost of it compare to Motech etc.

I recently just saw the e-manage drop again to like $499 brand new!! (without harnesses).

Even if the ignition doesn't work, for this price it is still better than the SAFCII and have better fuel tunning.

I also heard something about Buddy Club having something similar to an E-manage?!

There are 2 version apprantely and one version is actually made for autos.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah that is not actually a lot. Just painting my GTR frontend and the little bits to make sideskirts/nismo flare pieces work correctly/fit on the sedan/mount up correctly came to about $7000. Is it a lot? Sure. None of this is economical. Economy would be shelling the car and buying a 2010 Corolla to commute in. The perspective of all of this is different.
    • I have the 2025 build re003s’ on my 06 XT Forester Turbo and I quite rate them for street wet and dry
    • I don't see any issues here. I've been saying all along this is a big job, the price reflects that.  When the car comes back perfect I'm sure it will feel like money well spent. 
    • Remember, take original quote. Double it. Then add a bit more. It's how any project goes.
    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
×
×
  • Create New...