Jump to content
SAU Community

Recommended Posts

I'm using Motul Turbolight 4100 ATM in my 33 (same engine) but am going to start using Elf's 10W-50 full synthetic oil. A friend of mine changed his 200SX over to the stuff from the motul & he won't go back. Not much dearer than the 4100 which is only a semi-synthetic, but well worth the little extra.

15000 Km's is a bit far for 1 lot of oil on a turbo car, you should always change your oil at 5000 km if u want your turbo to last a reasonable amount of time, not to mention protecting hydraulic lifters & the variable valve timing gear amoungst other things too.

Edited by Electro
  • Like 1

i know 5 thou is wat it should be changed at, and yea but that 15 thou is wat my mechanic recomended and they would talk shit to me, im goin to monitor the oil and keep trach of it all arond the 3K km through to 5K km though, so im no way known gonna let it f**k anything up, He uses royal purple in every thing he knows, i guess ill let u all know, cheers

i know 5 thou is wat it should be changed at, and yea but that 15 thou is wat my mechanic recomended and they would talk shit to me, im goin to monitor the oil and keep trach of it all arond the 3K km through to 5K km though, so im no way known gonna let it f**k anything up, He uses royal purple in every thing he knows, i guess ill let u all know, cheers

Oil servicing is more dependant on the type and condition of the car (or more specifically the engine) than the type of oil that's stuck in the thing. It may start off as a better oil, but none of them will magically hold their original properties for 10,000 klicks more than another oil.

I'd say maybe at best you may squeeze an extra 1000 kays out of the better oil simply because it (allegedly) starts off as a higher grade of oil. All oil gets carbon deposits and other contaminants that the engine produces in it just as fast, & this more than anything is why it needs changing regularly anyway.

I haven't heard of Royal Purple myself, I'm dreading what you're spending on the stuff!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...