Jump to content
SAU Community

Recommended Posts

Hey,

I'm sick off using the miniature car jack, that comes with the car, and safety stands, to get the car up to work on. Also the car can only be raised a limited height due to the jack.

I'm gonna go check out supercheap/repco in the weekend to see what I can get. I'm thinking of either car ramps or the hydraulic jacks (I think i saw one for $30ish), depending on the price.

What have you guys bought, and where from, and how much did it set you back?

Andy

p.s Optimal would be the use of hydraulic jack with safety stands, if the price is right.

Link to comment
https://www.sau.com.au/forums/topic/112617-hoisting-your-car-up-at-home/
Share on other sites

Ramps are always an issue with modified skylines due to the height on the front bar...

I always use a hydraulic jack and then stands... This is the safest method...

Dont ever get under the car just on the jack tho... Always put stands in place.. Ive seen what happens when cars fall on people first hand... Its not pretty...

The larger $100 jacks will give you a lot more levereage than the cheap little ones. I've got a $30 jack from supercheap once and its a piece of shit..lol

Stands are like $30.. no biggie there.

For my car you need both :thumbsup: baby one to lift it enough to fit the big one under.

And jack stands, just make sure they have the ticks, and correct load ratings. They should, but for safty just check.

Predator - about ur $30 jack that u bought - can u elaborate on piece of shit? What was actually wrong with them?

Im not looking for anything fancy - as long as it pops the car up so I can get the stands under it Im happy.

Supercheap have got one in their latest catalogue for $55 bucks.

I always use a hydraulic jack and then stands... This is the safest method...

well, i reckon a pit is even safer

ive just been looking to buy a house and found a house with a double garage, with a pit

i so wanted to buy it, but wifey wouldnt have a bar of it

i used to have access to a pit but that was before my interest in cars.

pity

when i have to put the car up for long periods i use axle stands.

i gave some thought a long time ago to building some specialised ramps for my car but the reality is theyd have to be so long and gradual that it was hardly worth it.

If you are talking about ramps, can I assume that you are just talking about oil changes and the like ?

If so, you can use standard car ramps on your very low Skyline. This may be just for the other guys if this is not your intention.

What you do is turn your steering full lock, place one ramp only on the side that has the wheel protruding and drive sideways up this ramp.

I have been doing this for a couple of years now for oil changes.

Apologies if this is a hijack or a well known thing but.... hope it helps someone out.

Enjoy!

El Bee

I love my hoist at the workshop! it makes life easy.

I always do work on my car at the workshop. in my next house I want a big garage with a hoist in it.

If anyone gets stuck (needing help to get under) feel free to pop in.

Edited by Baysidebluebnr34
I love my hoist at the workshop! it makes life easy.

I always do work on my car at the workshop. in my next house I want a big garage with a hoist in it.

If anyone gets stuck (needing help to get under) feel free to pop in.

Ok from now on I'm doing all my work at your place. lol

I bought an Omega quicklift jack that came with two stands for the wonderful price of $205 from Repco.

Goodluck replicating that price though.

I got an $80 trolley jack from Supercheap and damn it works well, I just wheel it under and jack up. Makes it alot safer then jacking up with the standard jack and also it has a wider base so it is much more stable, makes it easier to jack up on grass if need be. I got the jack and 2 axel stands for $120 and it was worth it.

those with trolley jacks what part of the car do you use?? my sideskirts are too wide so i cant use it on the side (behind the front wheel arch) without using the standard jack to raise the height a few cm. The only way i found that works is to use the trolley jack square on in the middle of the car and jack it up using the lower radiator support, not sure if that point is designed to hold the whole weight of the front of the car tho..

trolley jack for me 1500kg ish rating from repco think it was like 100something but on sale was like 70 so yeah enough to lift a 32 but have a lil bit of trouble getting it under - and will deff have more trouble once it gets the suspension sorted .. i place the trolley jack right in the middle axels -

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...