Jump to content
SAU Community

Recommended Posts

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

These days you cant take any car for granted....people are throwing powerful engines into random cars willy nilly.... so rolling up next to 'any old car' has now become a whole lot more interesting.

Man i remember pulling up next to a Astina 323, pretty stock looking and then wham....off he went....i was in a 1990 Nissan Pulsar 1.8L Hatch fully hecktic spec...so wasnt doing any funny stuff. Next set of lights it turns out a huge arse FMIC is grinning out the front of the car......

Dont take a car for granted.... just because u own a skyline doesnt mean u can 'chop chop' anything on the road.....

Hi guys, I followed a link to this and thought I'd add my thoughts. There are two turbo MX5's, an SP which has 157kW at 6800 rpm and 289Nm at 4600 rpm with a 6 speed box. It's an Australian only version built under licence by Sydney-based Mazda Motorsport Division. It looks like this.

1409.jpg

Then there's the SE which is a factory turbo which has 121kw at 6,000rpm and 206nm at 4,500rpm. and it looks like this.

mx5se_exterior_lrg.jpg

The easiest difference to note is come standard with gun metal grey 17's. It also has a 6 speed box.

Both of these are very very quick as they have a kerb weight of around 1,100kg, though the SP especially given it's higher power and torque and will do the quarter in low 14's.

As for handling, the SE has Bilstein suspension so it's got a firmer ride and Torsen LSD so closes the margin on real world comparisons. I know of many that tweak the turbo of both cars to get upwards of 170kw out of them so it's understandable it took off so quick.

With some serious work these BP engine can get 400hp which makes for some serious sideways fun.

As for me, I've got a 94 MX5 Clubman with Torsen LSD, Tein Coilovers, CAI, Headers, roll bar and sticky tyres which is a whole bag of fun. Here's a pic of the weekends LVMA day at Mount Cotton which I understand some of your guys went to after we finished. Top day!!!

IMG_5257.jpg

Edited by Brad MX5

How could you think they were slow fwd cars for hairdresses? The've been around for 16 years or so, there the best selling convertable of all time, and the won wheels car of the year in about 1989 and 2005.

This is a great thread... :mage:

I sold my R33 (that had nearly 200rwkw) a couple of years ago because I wanted to buy an mx5, and I can tell you that the mx5 is significantly faster (and more fun) through the corners (and you don't get that weird feeling of the 4WS shifting directions mid-corner) even dead stock. When you add a turbo it doesn't take much extra power to make it go very quick. An mx5 weighs 950-1100kgs (depending on model). An R33 weighs 1350kgs. That's why you lost...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
×
×
  • Create New...