Jump to content
SAU Community

Recommended Posts

:D for the street/old pac drivers. and for the track.

due to a couple of friends of mine loosing there engines from a simple lack of oil i thought id post up a easy guide on how to keep your engine from poping...

GTR OWNERS: when you change your oil, fill the carnt thing up to the hump on the dipstick.

this works out to be roughly 6 to 6.5 litres of oil.

if the oil level is on high. it will surge just acelerating in first gear. (not to mention corners)

i have done thorough testing of this and can asure you all that this quantity of oil is the MINIMUM that is required to combat oil surge in a standard sumped gtr.also a tomie baffeld one to.(makes no differance if its

baffeled or not.) (mechanical oil presure guages dont lie)

now. im not a fan of motul oils. but hey you guys love the shiet so yeah.

using a good quality synthetic oil with a cold rating of less than 15. and a hot rating of 50 or more is the go.

eg 5w60 penrite is my personal favorite. its the only one i have used that can stand up to a whole track day without "breaking down"

GTS-T OWNERS your cars have a much better sump design so you can get away with using abit less oil. 5.5-6 litres of oil is suficant. the rwd sumps still have poor bafeling anyway. so fill them to just before the hump on the dipstick.

so summing it up PUT OIL IN YOUR ENGINE its not hard to fill er up abit over full. it does no damage to the engine. it just keeps all those legs in bed.

so following this instruction it will extend the life or your RB by a long mark

the same rules aply to any RB powerd car with the standard CAPACITY sump

ps.. moderator please leave in nsw section as it is aimed at our own circle. cheeres :D

Link to comment
https://www.sau.com.au/forums/topic/115490-keeping-that-engine-alive/
Share on other sites

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

But you don't recomment this for the street do you?

I changed my oil recently and as I had a track day coming in a few weeks I overfilled. Car goes fine, a bit more oil in the catch can (or spewing out of it in my case since it is a crap can) but the one thing I noticed is that when I start it up in the morning (or stone cold anyway) it burns oil for about 3-5 minutes. I can see it coming out the exhaust and my garage fills with fumes.

It didn't do this before. Can you explain it and is it ok?

yes. the same aplies

Mine has a oil controll problem at the moment... we built this RB30DET over 2.5 years ago and we did not know to block one of the oil feeds and put a restrictor so if i had more oil in the engine i would have an oil fountain lol

getting this done in the next month or so

i think you may have wire crossed steve-o. surge tank is used to combat fuel surge. there is no realy way to add an external surge tank for oil without going dry sump, in which case it's still not realyl a surge tank, just an oil, holding tank.

generally sump baffles are the way to go to help combat oil surge as they attempt to prevent oil from flowing away from the pick-up, or even better a larger sump and baffles, or at the extreme, dry sump. the only reason not everyone has them is fitting the sump baffles requires engine removal.

Yeah i thought that just after i posted it up - couldnt be bothered deleting it

Thanks richo - so far no fuel issues (touch wood) other than that damn fuel cap - it started leaking again today !!! but its only on very hard cornering

Mine has a oil controll problem at the moment... we built this RB30DET over 2.5 years ago and we did not know to block one of the oil feeds and put a restrictor so if i had more oil in the engine i would have an oil fountain lol

getting this done in the next month or so

you wont get any more oil up there than normal. instead you will be pumping oil thru the motor not air!!

this is what people dont understand...

but if you wanna pull the head off to try and kinda make a diferance go rite ahead :(

Turbine and I just pulled my GTS4 RB20DET out this weekend and found that 4& 6 BigEnds were totaly cooked and stuffed from lack of oil.

Have had clattering noise for some time now and oil gauge always mostly reads very low but sometimes full scale so just dismissed the oil gauge sender as faulty which is common fault have been told.

Mostly filled to under high level so prob not enough for AWD GTS4 which has same sump as GTR & Stagea.

Over filling probably may not have saved my RB20 but it may have made it last longer so I will be filling my next motor up higher.

I am looking for a Stagea RB25DET if anyone knows of a near complete motor less Gbox.

Well if GTR's suffered from oil surge... this thread would actually be right

But they dont, the sump design is actually quite good.

The killing of bearings etc is due to other reasons, certainly not oil surge

A topic comes to mid actually... i love the search button :O

http://www.skylinesaustralia.com/forums/in...opic=110680&hl=

What oil is best for a 33gtst with only a turbo-back, front mount, pod and boost controller?

Try doing a search - there's a million threads on this (particularly in General Maintenance and Forced Induction)

For the record, I use Elf Excellium 5W-40 Full Synthetic

In saying that, I think a fair few people on here use Motul 300V Chrono, 8100 Excess or 4100 Turbolight - there's many to choose from that will do the job. Do the search and figure out what suits you best.

I guess it comes down to how much you want to pay, how modded your car is and how you use your car (i.e sunday driver, daily commuter or weekend warrior for example).

Update on an oil problem no-one could have fixed!

Found the reason for my oil problems - the back plate on the oil pump had come virtually off and most of the screws had come out!!

As this is inside the AWD sump and needed the complete block top be removed to identify the problem.

HOT DAMN!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...