Jump to content
SAU Community

Recommended Posts

I have read a couple of threads where people were asking which turbo on RB26 for street/strip. I told them we were currently fitting a GCG 35/66 SPL on a GTR and that i would post results.. The car is finished and has been Dynod, unfortunately it ran out of injector at 13 PSI ( SARD 650cc) to my amazement, but made 275kw on Unigroups dyno. I drove the car today for the first time and was blown away by the torque, the same if not less lag than the standard twins, comes on strong and stays on right through too 8000rpm.

Very impressive, can reccomend this upgrade for anyone who is looking for a very streetable single turbo.

Car should see well over 320kw with a bit more boost.

other mods include :

APEXI D-Jetro

Bosh 044 fuel pump

eBoost

custom 3" dump pipe

turbosmart 48mm wastegate

Hi flow cat into 4" exhaust.

Tomei Inlet and exhaust cam gears.

Thanks to unigroup for excellent tune and John for his patience.

Link to comment
https://www.sau.com.au/forums/topic/119136-rb26-single-turbo-upgrade/
Share on other sites

ran out of fuel using 650cc's @ 275rwkw?

What went wrong?

Was it fuel pump or a fruited fuel reg or something?

650's should bring home mid high 300's :ermm:

seconded ..

294 rwkw here with 550cc and 044 pump..

think the injectors are trimmed to like 70 % and only reach about 90% duty ..

but yeah anything that spools up at the same or earlier than std turbos and produces more power would be a nice streetable setup.

No, pump is in, have been in contact with saard supplier, we all agree 650cc should be ample. possibly supplied wrong injector. They are sorting it out. But that was not the purpose of this thread.

Ah, that would explain it ;)

Runs 66mm compessor wheel in ar.80 cover and ar82 turbine housing.

Ill upload some pics now.

Ill post dyno sheet when tune is completed.

Manifold is a stainless steel GCG manifold,

bezerk32 what are the a/r specs for cold and hot side of turbo?

yeah i heard those bosch pumps you need a relay

post-695-1148513350.jpg

post-695-1148513475.jpg

Edited by 2rismo
Search GT3567R , pics at Full Race Motorsports .

Cheers .

Would this turbo be similar to a trust t78-33d? Bigger or smaller..? I'm doing pretty much the same as you with a trust turbo, just wondering how laggy it would be. Sorry to hijack :D

Edited by Dynamix
  • 1 month later...

my 2c

sorry to be negiative but it does seem like a very good upgrade in dollars for hp as i compare the reasults to a

r32gtr running r400 turbos (which are std size but stell wheeled)at 16psi

making ~390rwhp

r34gtr running std turbos 400rwhp

so its seem strange to me to go to such effort for 20rwhp ?????

when a small turbo upgrade of the low mounts can land you over 100rwhp more and no i'm not having a go at singles in general but this upgrade doesnt seem to give much gains per dollar.

pete

ps im running std r33 fuel pump at 530rwhp std fuel reg and running in the low 70% range most of the time at low 500rwhp

I was looking at his car the other day. When i took mine in for an oil change got to say looks Great and nice and neat. injectors looked like 550 nismo's any way i talked to jim about the computer and i hope it all works out for you. Very nice CAR mate

Brad

hey pete dont start the single vs twin debate again :P

hows your setup going anyways mate?

you missed my whole point cruiseliner

i use std or near std well tuned examples of gtr's to say why would you spend all that money, time and effort to gain 20rwkw if it makes it. Doesn't that seem a little silly waste of time and money. But this is only my opinion and i'm sure it a very nice gtr.

cruiseliner do you now understand what i was trying to say

as for mine is going like a stream train but the only issue i got is the new low temp thermostat and large greddy radiator are keep running temp to low for my liking and i will be going back to std thermostat. A running temp of 65 to 68deg is to low for me and is keeping the pfc in the cold water temp compensation tune(rich as). The question is how is your going put a final tune through it with some boost? Unfortaunately most of my time at the moment is going into project number to silvia drifter i'm building up.

pete

sorry if it seemed i was have a go at singles but the combo does seem worth time and effort for the results gained.

Yeah did that but i just don't like it that cold. All the production race guys i talked to believe the motor run best under full load (mean track work around 80-85deg) and i believe most oils and ecu as set this way for a reason. I think the low temp thermostat might work well will std cooling system but i found with the bigger radiator is just to cool for my liking.

pete

ps sorry for off topic comments

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...