Jump to content
SAU Community

Recommended Posts

So since there are so many pumped GTSts and drift cars in this thread i thought best to post here...i now have faily pumped rears, by about 1" or so, ditto the front. Will 18 x 10 +22 clear with undersized tyres? Close? I know the 18 x 9 + 15 are going to be tight on the front, but i run plenty of camber which will help

So since there are so many pumped GTSts and drift cars in this thread i thought best to post here...i now have faily pumped rears, by about 1" or so, ditto the front. Will 18 x 10 +22 clear with undersized tyres? Close? I know the 18 x 9 + 15 are going to be tight on the front, but i run plenty of camber which will help

when u say undersized tyres what do u mean? tyre size is one of the most important parts to wheel fitment so it's kind of hard to tell u without knowing that.

it also depends on how good the flare is (assuming thats what u meant by pumped and ur not talking about overfenders etc).

each flare is different and gives a different amount of clearance, regardless of how far it pokes at the furthest point. a lot of R32's have an issue with the wheel sitting further back in the rear guard, so even with decent flares they find the tyre starts fouling on the rear of the guard quickly.

saying that, 18x10 +22 should slide under fairly easy with a smaller tyre and a decent flare, few people are running 10" +20 on rolled 32 guards and a 235-225 tyre with a decent amount of camber.

R32 GTR of a friend

igp0082.jpg

Anymore pics of this mate? are they 5Zigen FN01r-c's? have been trying to find pics of these on gtr's for ages, any idea what sizes they are?

Would love some more pics mate, thinking of getting those for me r33 gtr.

Anymore pics of this mate? are they 5Zigen FN01r-c's? have been trying to find pics of these on gtr's for ages, any idea what sizes they are?

Would love some more pics mate, thinking of getting those for me r33 gtr.

You're right mate those rims are 5zigen FN01r-c's :D Sizes are: 17x9,5 and 17x10,5.

Only got this single pic left, I hope it support's you on your decision :angry:

igp0085.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...