Jump to content
SAU Community

Recommended Posts

32s i found on the net. my 32 is black with stock rims haha

RB20 GT2535 18psi 300whp - the car's 20 years old this month!!! they don't make them like they used-to

carfront.jpg

ratty drifter, porn

ST340137.jpg

first dibs on this kit if I can find it!

SA3400151.jpg

SA3400161.jpg

local track radial tyre record holder (in japan) lightened to just over a ton and RB20 with 25 turbo.

img20090829.jpg

cheers

first dibs on this kit if I can find it!

SA3400151.jpg

SA3400161.jpg

cheers

Front bar vertex

side skirts vertex

and rear bar looks to be final konnexion

vertex parts are easy to get, ive got the side skirts and rear bar on my car

and final konnexion im pretty sure are also avaliable at some of the body kit places to

more details on this thanks.

Cool, I'll do my best but the pics are big as they get on the website I think. I got the pictures from a blog written by Tochi, from shop called YMS. This HCR was brought in by a customer (Super NOW) ‘NOW’ is phonetically spelled for ‘na-u’ (na-u-i), which is ‘trendy’ in Japanese. Who just got the track record for Nikko circuit 38.902 sec for radial tire TOYO R1R (I heard from a local Toyo guy that this is not released as a semi-slick any more, I got them on my car and it’s so soft like a semi ). This car also does the Tsukuba 2000 track in under a minute J sweet.

I read Japanese so I surf the Japanese side of the web.

The blog read something like… the car came in for a check and a possible retune, had the diff ratio changed, different boost controller installed. Base figure was 280hp at the rears, after the tune was 300hp on same RB25 stock turbo on a/m exhaust manifold. And came in later for another tune with an adjustable cam gear. The power was measured by dyno-pack. he might have this thing calibrated to show power at the flywheel, I donno. When I read some of the power figures on his site, all the power readings seems to be high ish. there isn't much info on the site apart from the motor. looks like lexan for glass atleast.

Im putting up all the pics from the web http://blog.goo-net.com/tochi/daily/200909/12

img20090829_1bay2.jpg

img20090827_1rear.jpg

img20090811_2interior.jpg

img20090811_5rearunder.jpg

img20090811_6underfront.jpg

img20090811_1bay.jpg

img20090912_2dyno2.jpg

img20090912_1camgear.jpg

img20090912who.jpg

hope you enjoy!

P.S thanks for the kit info

Yeah i also dont rate chromies AT ALL! Your current rims look good on the car though. Black on black can look good but sometimes the rim style is a bit lost cause they don't stand out. But time attack's are fkn sweet!

te37TimeAttack.jpg

OOOH those are DAMN SEXY!!!!!!

Cool, I'll do my best but the pics are big as they get on the website I think. I got the pictures from a blog written by Tochi, from shop called YMS. This HCR was brought in by a customer (Super NOW) ‘NOW’ is phonetically spelled for ‘na-u’ (na-u-i), which is ‘trendy’ in Japanese. Who just got the track record for Nikko circuit 38.902 sec for radial tire TOYO R1R (I heard from a local Toyo guy that this is not released as a semi-slick any more, I got them on my car and it’s so soft like a semi ). This car also does the Tsukuba 2000 track in under a minute J sweet.

I read Japanese so I surf the Japanese side of the web.

The blog read something like… the car came in for a check and a possible retune, had the diff ratio changed, different boost controller installed. Base figure was 280hp at the rears, after the tune was 300hp on same RB25 stock turbo on a/m exhaust manifold. And came in later for another tune with an adjustable cam gear. The power was measured by dyno-pack. he might have this thing calibrated to show power at the flywheel, I donno. When I read some of the power figures on his site, all the power readings seems to be high ish. there isn't much info on the site apart from the motor. looks like lexan for glass atleast.

Im putting up all the pics from the web http://blog.goo-net.com/tochi/daily/200909/12

thanks mate

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't think there's any way someone is push starting this car.. I honestly can barely move it, and moving it and steering it is just flat out not possible. I'm sure it is, but needs a bigger man than me. I have a refurbished starter now. The starter man was quite clear and consise showing me how nothing inside a starter really should contribute to slow cranking, and turned out that for the most part... my starter was entirely fine. Still, some of the wear items were replaced and luckily it didn't show any signs of getting too hot, being unfit for use, etc. Which is 'good'. I also noticed the starter definitely sounded different, which is a bit odd considering nothing should have really changed there.... Removed and refit, and we'll pretend one of the manifold bolts didn't fully tighten up and is only "pretty" tight. GM only wants 18ft/lb anyway. I also found a way to properly get my analog wideband reading very slightly leaner than the serial wideband. There's Greg related reasons for this. The serial output is the absolute source of truth, but it is a total asshole to actually stay connected and needs a laptop. The analog input does not, and works with standalone datalogging. Previously the analog input read slightly richer, but if I am aiming at 12.7 I do not want one of the widebands to be saying 12.7 when the source of truth is 13.0. Now the source of truth will be 12.65 and the Analog Wideband will read 12.7. So when I tune to 12.7 it'll be ever so slightly safer. While messing with all of this and idling extensively I can confirm my car seems to restart better while hot now. I did add an old Skyline battery cable between the head and the body though, though now I really realise I should have chosen the frame. Maybe that's a future job. The internet would have you believe that this is caused by bad grounds. In finding out where my grounds actually were I found out the engine bay battery post actually goes to the engine, as well as a seperate one (from the post) to the body of the car. So now there's a third one making the Grounding Triangle which is now a thing. I also from extensive idling have this graph. Temperature (°C) Voltage (V) 85 1.59 80 1.74 75 1.94 70 2.1 65 2.33 60 2.56 55 2.78 50 2.98 45 3.23 40 3.51 35 3.75 30 4.00   Plotted it looks like this. Which is actually... pretty linear? I have not actually put the formula into HPTuners. I will have to re-engage brain and/or re-engage the people who wanted more data to magically do it for me. Tune should be good for the 30th!
    • There are guys on Facebook under, Infiniti Owners Australia   https://www.facebook.com/share/g/1Z3RbPqx4k/?mibextid=wwXIfr What Whp are you after and I can help, and join this Q group in the states. https://www.facebook.com/share/g/19A59cN3JR/?mibextid=wwXIfr
    • Does any of you guys have instagram pages for your builds? Keen to see some Aussie builds. I still can't figure out how to post photos in here.
    • That awesome thanks for that. 
    • You can Remote any of these VR30..globally  Check: AMS Performance | Racebox | Sonic Tune | Soho | Z Motorsports | Specialty Z    Performance Parts | AMS | Z Motorsports | Boosted 6 |    Exhaust | Fast Intentions | ARK | MBRP Motordyne | Borla    There is someone in Sydney with 650whp   I am at 430whp without flex fuel, but FBO & Flex-fuel will push you to 500whp!!  
×
×
  • Create New...