R32 Pix Only

[ZILLR]

thanks mate, they are only 255s... looking to upgrade them to 275s once they need changing. (rubber is continental)

that exhaust is a veilside stainless steel 4inch turboback, 2 mufflers, nice and quiet when cruising but still screams when shes opened up =]

[(OO)SKYLINE(OO)]

thanks mate, they are only 255s... looking to upgrade them to 275s once they need changing. (rubber is continental)

that exhaust is a veilside stainless steel 4inch turboback, 2 mufflers, nice and quiet when cruising but still screams when shes opened up =]

Damn!

275 is fat rubber for the rears too.

I have 245 / 45 / 17R in the rears.

Thought it was a Veilside.

I think we have the same exhaust, but I think mine is only a 3.5" by measuring the out pipe on the exhaust tip.

But I will have to get my mechanic to change the stud pattern so it will fit onto my hi flow cat, as the catback has a 3 bolt stud pattern and my high flow is a 2.

Yeah I want to keep it as quiet as possible too but have a good flow.

[rad100]

heres mine.

18x9.5 +15 all round with 595ss 235/40/18

r34gtt 310mm front brakes, dba4000 slotted rotors

built rb25det, 3076r, ext gate, plazmaman etc etc etc.

[ZILLR]

Damn!

275 is fat rubber for the rears too.

I have 245 / 45 / 17R in the rears.

Thought it was a Veilside.

I think we have the same exhaust, but I think mine is only a 3.5" by measuring the out pipe on the exhaust tip.

But I will have to get my mechanic to change the stud pattern so it will fit onto my hi flow cat, as the catback has a 3 bolt stud pattern and my high flow is a 2.

Yeah I want to keep it as quiet as possible too but have a good flow.

yeah i put a highflow cat on mine since its going for roadworthy when im off my p's (7-8 months left) - will be off the car as soon as i go for the final tune

i just measured my exhaust tip now and from memory ive measured the pipe before from under the car and it was 4 inches

Edited October 11, 2010 by ZILLR

[(OO)SKYLINE(OO)]

yeah i put a highflow cat on mine since its going for roadworthy when im off my p's (7-8 months left) - will be off the car as soon as i go for the final tune

i just measured my exhaust tip now and from memory ive measured the pipe before from under the car and it was 4 inches

Ah ok!

I will measure mine again and let you know LOL!

Anything else getting done or just tuning?

Who you goto for a tune?

[ZILLR]

currently the cars got a forged bottom end, 2540s, cam work, grid ecu, the 4inch exhaust, hks pods, running 21 psi, walbro pump... but before i put it on the road ive got a hks twin entry fuel rail lined up, twin bosch pumps, 800cc injectors, fpr, hks cam gears, front mount (undecided yet), power fc dejetro, new intake pipes, hks torque split controller and afew other little things... going to see where that gets me then drive it til im sick of it.

im unsure of who i am going to tune the car with.. but i am thinking of going to see ben at racepace.

what have you done to your GTR?

[jenkies]

ADRIAN! thats track porn.... i have a wet patch

New wheels Jenkies?!

haha same ones mate, used to be white painted them to match the lower lip. love the old enkie 33n1's

[J - Rad]

What I tried to post the page before.

[(OO)SKYLINE(OO)]

^^ J - Rad,

Looks like you got some poke / wide wheels running in the rear wheels... Looks good!

currently the cars got a forged bottom end, 2540s, cam work, grid ecu, the 4inch exhaust, hks pods, running 21 psi, walbro pump... but before i put it on the road ive got a hks twin entry fuel rail lined up, twin bosch pumps, 800cc injectors, fpr, hks cam gears, front mount (undecided yet), power fc dejetro, new intake pipes, hks torque split controller and afew other little things... going to see where that gets me then drive it til im sick of it.

im unsure of who i am going to tune the car with.. but i am thinking of going to see ben at racepace.

what have you done to your GTR?

Hey man!

I remeasured the Veilside exhaust out pipe again and you're right, it is 4"

So yeah same exhaust and has yours got the "Japlish" written on it

Decent setup and mods you got there, sounds like a beast!

How many kW's you chasing? As the stock GTR front mount is good for 300 - 350+ kW's, anything after that, you could go Nismo / HKS etc...

Racepace is the way to go or RE Customs / Chasers / Status whatever you want.

My car is pretty much stock as it came from Japan but with HKS pods, Splitfire coil packs (Di Bridge), Cusco suspension, had a Blitz Nur Spec cat back but is friggin loud so got the stock cat back atm till I sort the Veilside out.

Aftermarket Down and Front pipes and a hi flow cat and TE37 wheels.

I more so did rebuilding on this car, my mechanic did the rear diff / turbos (Steel Internals) new clutch / new front disk rotors.

Mostly a weekender car for me as we all know the more mods you put in the more fuel you drink

haha same ones mate, used to be white painted them to match the lower lip. love the old enkie 33n1's

Ah yeah, that's right!

I thought you had white wheels...

The new colour is still looking nice too!

[GT-R32]

Great pic Jarrod. Looks sweet.

[drftps13=D]

probably wont amuse many SAU members lol

[ZILLR]

Hey man!

I remeasured the Veilside exhaust out pipe again and you're right, it is 4"

So yeah same exhaust and has yours got the "Japlish" written on it

Decent setup and mods you got there, sounds like a beast!

How many kW's you chasing? As the stock GTR front mount is good for 300 - 350+ kW's, anything after that, you could go Nismo / HKS etc...

Racepace is the way to go or RE Customs / Chasers / Status whatever you want.

My car is pretty much stock as it came from Japan but with HKS pods, Splitfire coil packs (Di Bridge), Cusco suspension, had a Blitz Nur Spec cat back but is friggin loud so got the stock cat back atm till I sort the Veilside out.

Aftermarket Down and Front pipes and a hi flow cat and TE37 wheels.

I more so did rebuilding on this car, my mechanic did the rear diff / turbos (Steel Internals) new clutch / new front disk rotors.

Mostly a weekender car for me as we all know the more mods you put in the more fuel you drink

well with the 2540s im looking at a minimum of 350kw but thats with a fair bit of lag imo... dont mind the lag too much since i can keep it off boost ect and mine is strictly a weekend car once its on the road.

yeah on the top of the exhaust tip i have a oval stamping with some jibberish ive had the car for 3 years and just noticed it last summer when i was under the car taring the undertray (fussy owner)... was quite happy when i found out it was a veilside system

if you ever need rotors or pads shoot me a pm, my parents run a ebay business with performance car parts. we stock rda, ebc, bendix and protek... soon to be getting defi gauges in ect. talk in pm if you want mate.

[ushercrusher]

Good collection here

[wal32r]

probably wont amuse many SAU members lol

That amuses me alot

[rad100]

probably wont amuse many SAU members lol

dmax roof and boot spoiler?

[(OO)SKYLINE(OO)]

probably wont amuse many SAU members lol

Looks bad as!

More pics!

well with the 2540s im looking at a minimum of 350kw but thats with a fair bit of lag imo... dont mind the lag too much since i can keep it off boost ect and mine is strictly a weekend car once its on the road.

yeah on the top of the exhaust tip i have a oval stamping with some jibberish ive had the car for 3 years and just noticed it last summer when i was under the car taring the undertray (fussy owner)... was quite happy when i found out it was a veilside system

if you ever need rotors or pads shoot me a pm, my parents run a ebay business with performance car parts. we stock rda, ebc, bendix and protek... soon to be getting defi gauges in ect. talk in pm if you want mate.

Yeah awesome!

If I am searching around for parts, you'll be on the "To ask" list!

Thanks man!

[JoelyMoley]

some goodies from the 32 cruise:

[GODZILLA-GTR]

OH.MY.GOD. Those engine bays are insane

[NA_Goodness]

probably wont amuse many SAU members lol

Thats insane... More pics?

some goodies from the 32 cruise:

Nice shots mate! Some great angles there

[Juan_2_3]

Here's my car got it detailed by Damian from Final Inspection

Highly recommended!!!!

R32 GTR