Jump to content
SAU Community

Recommended Posts

dont have any pics that i would really want t put up here but meh, the ones i took with camera were quick and are crappy angles and what not, and the decent shots were on a mates phone so are not great quality :thumbsup:

but heres some until i get out to a nice undercover car park :no:...

post-22805-1161141466.jpgpost-22805-1161141497.jpgpost-22805-1161141557.jpgpost-22805-1161141574.jpg

Still have to get the bar resprayed...but fresh paint...striaght to the race track to get plenty of stone chips :dry:

gallery_462_50_12190.jpg

gallery_462_50_98985.jpg

gallery_462_50_36200.jpg

The only place you can really enjoy these cars :P

Car is going back to get bar resprayed now the rally is over and get the spoilers put on...then to get bigger tyres for the new LMs and get some nice pics while she is still in one piece :(

Here it is with the old paint...nbew silver is sooo much nicer :)

462Roy_Turn_2.jpg

462Drags_Side_burnout.jpg

462DSC07641.JPG

462After_Engine_Pic.jpg

Interior.jpg

Like all 32 owners...i really love my car :)

What's wrong with the rear of it? And "Mr Burns" was trying to make a video on his phone I think. I think it was a little difficult though.

I don't like the lights on 4 door 32's. Although your's does look tough. But standard they look sh!thouse.

you goin for 1 straight color or a pearl or a flake or what :) ?

i wanna know if anyone has a black/red chameleon, i rekon that would look hot !

Not sure yet i work at a panelbeaters so any colour is possible

Nick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...