Jump to content
SAU Community

044 Install Opinions

mr_rbman

By mr_rbman,
in Engines & Forced Induction

 Share

Recommended Posts

mr_rbman Grand Master

mr_rbman

Posted
Posted

well currently i have a GTR fuel pump in my 32 and its time to upgrade (nothing is currently wrong with the GTR pump but will run out of puff with new mods) I was simply going to put the 044 intank and be done with it but after talking to a few people i learned that you can leave that pump intank as a lift pump and mount the 044 externally. I've had a good think about this and the more i think about it i think it would be a really good idea but i'm not too sure exaclty where to mount the 044 as i don't want/have a surge tank! Was also thinking this would be easier than mounting the 044 intank (quite a bit of modding needed)

If anyone has done this and has pics it would also be much appreciated!

cheers!

Link to comment
https://www.sau.com.au/forums/topic/121001-044-install-opinions/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Mount it where ever it fits.

internally (inside boot) or externally (underside of the rear of the car)

Its upto you where you put it.

Most people going to the effort of installing a secondard inline fuel pump would have surge tanks IMO.

Going to all the effort there is no point not to.

So hence probably not a lot of people have two pumps for mild power applications

Sydneykid Grand Master

Sydneykid

Posted
Posted
well currently i have a GTR fuel pump in my 32 and its time to upgrade (nothing is currently wrong with the GTR pump but will run out of puff with new mods) I was simply going to put the 044 intank and be done with it but after talking to a few people i learned that you can leave that pump intank as a lift pump and mount the 044 externally. I've had a good think about this and the more i think about it i think it would be a really good idea but i'm not too sure exaclty where to mount the 044 as i don't want/have a surge tank! Was also thinking this would be easier than mounting the 044 intank (quite a bit of modding needed)

If anyone has done this and has pics it would also be much appreciated!

cheers!

Here’s the problem, most guys find that installing a second pump is not as easy as it sounds. You have to;

1. find space for it

2. mount it in rubber as they vibrate a lot

3. run the fuel lines to it

4. run a separate relay, as 2 pumps draw too much current for the standard wiring

5. run a decent size power supply from the battery to the pump

Compared to, remove the standard pump and make a few small mods and install the 044. Later on, if you need the extra flow that 13.8 volts gives you, you can run the relay and dedicated power supply.

That’s the reason most people do the pump swap, it is actually easier/faster/simpler.

>_< cheers :(

  • 1 month later...
  • 2 weeks later...
Dahtone Racing Grand Master

Dahtone Racing

Posted
Posted

ok just pulled my old pump out and realised that GTR and GTS have different set ups

looks like its going to be a shit load easier to fit it in tank than i expected

what will happen if i dont install a check valve?

saliya Rising Star

saliya

Posted
Posted
what will happen if i dont install a check valve?

The check valve stops fuel flowing back to the tank when the pump is off.

So when you turn your car off basically you'll lose fuel pressure, the longer it's

off the more pressure you lose.

In real terms this means when turning it back on after it being off overnight

you might need to wait a few seconds between switching the pump on and

engaging the starter motor.

I'd leave the check-valve on there :P

Regards,

Saliya

Craved Grand Master

Craved

Posted
Posted
044 do not come with a check valve

either way im off to buy one now :wave:

mine came with a banjo style fitting with a check valve... i removed it and installed one from motorsport connections ..

lets you use a straight fitting Vs the banjo style side exit off the pump.. also lets you use a speedflow type screw on fitting for your main feed line from the pump...

plus it screws directly into the fitting on the end of the pump as well

think it was about $50

mr_rbman Grand Master

mr_rbman

Posted
  • Author
Posted
mine came with a banjo style fitting with a check valve... i removed it and installed one from motorsport connections ..

lets you use a straight fitting Vs the banjo style side exit off the pump.. also lets you use a speedflow type screw on fitting for your main feed line from the pump...

plus it screws directly into the fitting on the end of the pump as well

think it was about $50

any pics of this?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.  
    • Kinkstaah
      Wheel Sizes & Offsets For Skylines

      By Kinkstaah · Posted

      If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • MBS206
      MAJOR FUEL ISSUES 25det neo r32

      By MBS206 · Posted

      Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...