Jump to content
SAU Community

Recommended Posts

yes finally got the car

but damn the guy didn't put a 400R bar on for me, jus a normal gtr bar, guess he forgot but oh well.

66384939BwICXh_ph.jpg

66385020ZqFsBd_ph.jpg

66385074CyUYII_ph.jpg

66385139MHQqoB_ph.jpg

enjoy

but some really bad stuff happened. :D the shock is still sinking in

went into this carpark at glenny station and connected to it is another car park. looking straight on it looked flat, BUT it was infact slanted like a hill and i didn't see it. End result cracked front bar already. Pretty bad, i'm quite depressed about it being first day and all. The front is too low, it scrapes too much, even in driveways, its about 12.5cms off the ground. sigh is there anyway i can get this without changing the springs.

i can handle the damage and live with it, but i just dunno how to explain it to my mum. If you look in the pics you can see the two cracks in the middle, even the right indicator fell off.

how much would it cost to repair something like this.?

thanks:o

Link to comment
https://www.sau.com.au/forums/topic/12137-finally-got-the-carpics/
Share on other sites

heheh, welcome to the world of aftermarket frontbar meet driveway humps tragedy!

12.5cms not too bad, you just need to drive more carefully and not to trust any driveway/carpark entrances.

if your car's been lowered, best bet is to change spring and raise it back to factory height. I don't see any other way, except you have an aftermarket height adjustible coilover suspensions.

u wanted a 400R bar, and got a GTR and all u can say is, "oh well" ?????

dude, u wanted a 400R, i'm assuming u paid for it, u should bloody well get it.

oh.... nice car, those p plate stickers look mean.... what they add, bout 100rkw's??? :P

hey looks good chop!! now we can sort out a date for the meet

Can't wait inark, but still gotta settle some minor details first like insurance and then I'll be all set

Why are u scared of ur parents seeing the cracks?

Yes of course! they barely let me get the car you know!

u wanted a 400R bar, and got a GTR and all u can say is, "oh well" ?????

hehe actually I didn't pay for it, he said he would change it for me for free but i guess he didn't have any left, but damn my wheels are shocking, gotta repaint them.

Hey Chopobo, were you at glenny tonight, i thought i saw a r33 like yours parked in front of the chinese restaurant at the bus stop???

yeap that was most likely me in front of that chinese restaurant near lucky cup. i left when this woman gave me a greasy look. very uncomfortable. im not going there again.

Nice car chop.. you can try weilding your crack then a respray..

eh? how do you weld plastic?

i dun think i can do it myself. prolly get someone to do it. how much would it cost?

is it cheaper jus changing the whole front bar?

Guest INASNT

chop first time i took my car home from the importer i couldnt even get it up my driveway no matter what angles i tried, and yes i ***ing cracked the front of my 400r bar on the first day 2. My car was so farking low the front bar used to touch on speed humps even if i went fully sideways on em, i had to leave my car at my gfriends house for the first 2 days i had it. I ended up going back to the importer and changing the springs, now it just touches a little on the way out of my driveway.

U live preety close to me hope to see u on princess highway so we can have a run :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
×
×
  • Create New...