Jump to content
SAU Community

Recommended Posts

Hey all,

There seems to be a lot of people who seem to be using the 0-100km/h time as a bench mark for vehicle performance. However, in my experience the 0-100km/h time is not a great reflection. Why is that? Many of the real world traffic light grand prix events are from rest (0km/h) to the speed limit, or just over it (so about 100km/h), so surely this would be the definitive measure of a cars on street performance? Not really, no. I will use an example to illustrate my point.

Three cars line up at the traffic lights. All three cars have an identical 0-100km/h time. For simplicity, let's make it 10 seconds. The speed limit of this road is 100km/h, so it will be a race to the limit. Nothing illegal here :P

Car number one is a concept vehicle (why it's at the lights I don't know...). An electric vehicle. It doesn't make much power (in fact the top speed is only 100km/h), but it is ultra light, and has 4 in-wheel electric motors giving full torque from 0 rpm, meaning it can charge of the line hard. Car number two is a regular family car. The long geared automatic with big six cylinder power means that acceleration is fairly constant throughout the rev range. The final car has a big turbo, front wheel drive, and manual gearbox. This makes it tricky to get off the line, but once it's hooked up and the turbo spooled, the acceleration is very good.

The image below shows a representation of these three cars' acceleration curves. As you can see, all three will hit 100km/h at the exact same moment.

post-18125-1150336377.gif

(for those who care, the electric car's speed was modelled by a quadratic equation speed=-(time-10)^2+100, the family car by a linear equation speed=10xtime, and the turbo by another quadratic equation speed=time^2)

So it's a race to 100km/h, and all three cars have an identical 0-100km/h time, so it should be a pretty close race, right?

WRONG! :P

The hard launching electric car gets the jump from the start, and wins by a full 45m over the family car, and a whopping 90m over the turbo car - that's about 18 car lengths!!!!

post-18125-1150336397.gif

(For those who care, distances were obtained by integrating the speed equations stated earlier. If I made any errors then they were deliberate and hence I don't care - don't bother pointing them out, the electric car would still win ;) )

This is obviously an extreme case, but I think it illustrates my point nicely. 0-100km/h times are stupid.

Edited by Big Rizza
  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

So basically you're saying distance covered in x amount of seconds is more important than 0-100 times...... say, like a 1/4 mile race? ;)

You're right, but you could put money to say that a car that does 0-100 quicker than another cars 0-100 will also cover more distance, hence beat it 9 times out of 10.

In general a car that is quicker over the quater mile usually has a quicker 0-100 as well...................

Big Rizza,

Props for such a well thought out post. you have much more spare time than me ;). That is really something to think about.

I hope I don't get beaten by a ful sik electric car.

i was sitting there thinking your maths was screw up and they would all be the same... until i thought some more. a slightly sideways look at it is to look at quarter mile times and speeds. a mate of mine had a turbo exa that ran a 13.1 at 91mph, while his borther had a natro r31 that ran a 14.0 at 97mph. the exa would get of the line great, but didn't have the puff at high speed to keep pulling, whereas the skyline was hard to launch but had the balls up top to get the speed. so their 0 to 91mph time could've been the same, but the skyline would've done it in less distance.

a better indication of power is rolling starts, like 40 to 80, or 40 to 100. 0 to 100 is too dependant on traction. thats why wrx's have such low numbers, but in rolling starts they get beaten by rwd cars.

I think mention also needs to be made of 0-100 and 400m times for 4WD cars (e.g. GT-R's and WRX's). These rely on redline launches that not only cause serious damage to the gearbox, but are unlikely to occur in everyday drag racing.

I think a more appropriate 0-100 or 400m time would have to include a normal RPM point at which the clutch is released. This would go some length to explaining why an RZ Supra is so much quicker than a GT-R, although they both manage 13 second quarters.

And while we're on the topic of performance figures, I hate hp and kw readouts more than anything else - worse yet because people put so much stock into them. But that's a topic for another post.

So what time will my car do 0-100metres? ;)

I dont have an front mount yet, also what will it do after i install a bov valve?

Can you also tell me how much boost is safe, if i only do 100 metres?

Any help would be appreciated, i tried a search but there were too many answers to my questions.

So i couldnt find any of the right answers i wanted to hear.

Edited by nissky
OK.....so based on your maths, what would the actual quarter mile ET and speed be for all cars?

I chose those formulas with the 0-100km/h sprint in mind, and to extend them outside that will make them less representitive of a real world situation - they are simply too primitive to be extrapolated and still reflect real world situations. Particularly the turbo car, which by the formula will keep on accelerating faster and faster at a rediculous pace, but for the fun of it I will do it anyways :P

Due to the electric car reaching max speed at 100km/h, the after 10 seconds the family car will start closing the gap. Similarly, after 10 seconds, the faster acceleration of the turbo car at high speed means it will start running down both the family car and the electric car.

At the 15.0 second mark, the turbo car will catch the family car.

At the 15.4 second mark, the turbo car will catch the electric car.

At the 15.8 second mark, the family car will catch the electric car.

The turbo car runs a 16.3 at 265.69km/h (see what I mean about unreallistic :D)

The family car runs a 17.0 at 170km/h

The electric car runs a 17.7 at 100km/h

post-18125-1150344395.gif

Whilst the 0-100km/h was a reallistic enough to show what could happen in the real world, this quarter mile situation is unlikely.

Even more unlikely is the turbo's standing kilometer - 22.1 seconds at 490 km/h. :P

EDIT: Oh, and here is the speed graph for the vehicles :P

post-18125-1150344867.gif

And the turbo car does 0-1000km/h in 37.1 seconds, and is accelerating at over 60 g's by that point ;) .

Edited by Big Rizza

Electric cars aren't gay. Have you seen that new Lexus forget what model it is, but's a big v8 with electric engine as well and it goes so damn hard and quite good on fuel for a big v8. They look awesom as well.

I'll try and dig up a website on it.

Electric cars aren't gay. Have you seen that new Lexus forget what model it is, but's a big v8 with electric engine as well and it goes so damn hard and quite good on fuel for a big v8. They look awesom as well.

I'll try and dig up a website on it.

No V8 for the Lexus GS hybrid. It's a V6 with the power of a V8 and the economy of a 4cyl. Apparently.

Dunno if that was what you were referring to... There will probably be a V8 hybrid in the new Lexus LS, but that's not here yet.

Edited by Big Rizza

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...