Jump to content
SAU Community

Recommended Posts

  • 5 months later...

Yeah THANKS spud, (hope you don't mind the abrieviation),
Only had it 3days and would yu believe that some jealous gronky CU*T has already deep keyed three panels parked at the shopping centre for fu*k sake.
Shit mate this is a lot of car, I am that infatuated, i want another one.
Just wondering which would be the better all round car , ie price , performance, the 2.6o turb'ed manual or the 3.5 natural 6 speed like mine, any opps on that spud. Perhaps one of each, two is better than one they say. Hee hee hee

  • Like 1
40 minutes ago, Axi$ 350$ said:

Yeah THANKS spud, (hope you don't mind the abrieviation),
Only had it 3days and would yu believe that some jealous gronky CU*T has already deep keyed three panels parked at the shopping centre for fu*k sake.
Shit mate this is a lot of car, I am that infatuated, i want another one.
Just wondering which would be the better all round car , ie price , performance, the 2.6o turb'ed manual or the 3.5 natural 6 speed like mine, any opps on that spud. Perhaps one of each, two is better than one they say. Hee hee hee

I love when people say spud haha, 

That would absolutely piss me off if someone keyed my car. 
I'm definitely more of a C34 Stagea guy, remember, when it comes to the Autech RB26 stagea, if something breaks you basically have to uy another gtr. I personally would buy a RS4S (2.5l Turbo Manual) if you want a C34, You could probably build up the RS4S to perform better than the Autech C34 and it may still end up being cheaper. Not really too sure when it comes to the M35 models, but I definitely respect a good looking one.

I'd love to have one of each haha

Edited by spudtatoe
1 hour ago, Axi$ 350$ said:

Yeah THANKS spud, (hope you don't mind the abrieviation),
Only had it 3days and would yu believe that some jealous gronky CU*T has already deep keyed three panels parked at the shopping centre for fu*k sake.
Shit mate this is a lot of car, I am that infatuated, i want another one.
Just wondering which would be the better all round car , ie price , performance, the 2.6o turb'ed manual or the 3.5 natural 6 speed like mine, any opps on that spud. Perhaps one of each, two is better than one they say. Hee hee hee

So its a 2wd manual? That makes it easier to modify if you're so inclined. The latest Link computers can run the 4 camshafts so time for a big single turbo!

9 minutes ago, KiwiRS4T said:

So its a 2wd manual? That makes it easier to modify if you're so inclined. The latest Link computers can run the 4 camshafts so time for a big single turbo!

I'm pretty sure they're just 6 speed auto, unless someone did a manual swap :D

Yep sweet as 6 speed manual. I think I got a little lucky donut, I mean I really like the only other 6speed the 260s, but everyone has a turb auto right, so if you gonna be different yu got to stand out in the crowd. This is not far off the mark, what yu recon donut .As for upgrades , might look at a chip n cam set, maybe some suspension which is pretty solid anyway, the head unit and thought the 260s wing just to confuse the experts Hertz.
Tell the missus yu can have your cake and eat it too with this little gem.

Good on ya spud. Had a family at school. all three boys we called spud, so it came sort of natural. Well yu sound like yu might know a bit more than a recent convert like myself, so I'll take your word for it on the specs. I'm pretty happy with it stock at the moment, but if I can get my grubby little mits on another low k's one cheap enough I might look some of the stuff yu mention, certainly like to maybe build a bittsa this n bittsa that, using all the best factory bits from across the skyline range, maybe a turn or two might fit that picture. One thing is for sure spud, two in the hand is much better than one in the bush, so yu are spot on, one of each would nothing hurt. All G in the H. Spud

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...