Jump to content
SAU Community

Recommended Posts

It was eventually decided that the new formula would revolve around the Holden Commodore

and the Ford Falcon. At the time Australia lacked the technology to develop 2 litre engines

like those used in the British Touring Car Championship, and it was decided that turbos were

too costly for many teams to run. Both the Sierra RS500 and Skyline GT-R were costing

around AU$500,000 for a competitive car. That kind of cost was well beyond most of the

privateer teams. The v8 was the cheapest option to develop and race in Australia.

Holden and Ford took the unprecedented step of releasing a joint letter to CAMS during

Bathurst – telling them to get their act together and set the rules for 1993, or Holden and Ford

would consider other forms of racing (NASCAR / AUSCAR)

Just checked the book, I was sorta wrong before ToF sounds like it was a bit of both :P

  • Replies 109
  • Created
  • Last Reply

Top Posters In This Topic

Ha ha ToF. Costing too much for whom...? Everyone needs a plausible excuse I suppose. its just a belief i have i impose on other's

It looks a little to convenient for Holden and Ford for my liking.

Who cares anyway commodores are primitive bombs full stop that Thrive on marketing like the Article this Thread is about...

heres one for ya ?

Imagine a VX or BF trying to beat a R34 around Bathurst, it just wouldnt happen lolol

One of the big issues with the new VE Commodore is that it needs to sell well to save the local car manufacturing industry.

If it doesn't sell, it will most probably mean the end of GM/Holden car production in Australia, and may even wipe Ford and Toyota out as well, not to mention all the little manufacturers of car parts in Australia.

So really the car industry (including Wheels/Drive etc) is just acting in its best interest by over-rating the new commodore (in some peoples opinion).

I mean I'm no fan of the new commodore but i can see what will happen if car production stops in Aus, tens of thousands of people will be out of work and all cars will be imported from overseas.

Imagine a VX or BF trying to beat a R34 around Bathurst, it just wouldnt happen lolol

what model are we talking? if you are comparing a r34 gt-t or gtr against a basic falcon then thats not really fair. if you compare a stock gt-t against a stock xr6 turbo, then there wouldn't be much in it. same as if you compared a natro r34 against a basic falcon or commodore.

Edited by mad082

I think everyone is getting a bit carried away here, or atleast losing sight of what the different cars mean in the different markets. A few points come to mind:

1. They used to make Nissan Skylines in Australia. Nissan Australia basically went belly up because too few people wanted them.

2. We tend to view the Skyline range as containing only the GT-T's & GT-R's. There are much more pedestrian versions that make for a better comparison with a povvo pack Commode.

3. You have to give credit to the local stuff for their fitness for purpose. They are essentially a cheap, large car the likes of which no other country makes. OK, they aren't BMW's, or Lexus', but do you really expect that for $35k?

4. Every Foulcan/Commode model released since the VB/XD has been a make or break model. Hell Holden went within $40 million dollars of packing up in 1986 when the VN was authorised for development. If you read any industry analysis written by an overseas journalist anytime in the last twenty years they will have essentially written off the Australian car industry. That we have one at all is cause for celebration, no bitching. Just think what happened to the UK car industry....

For the record I own both a GT-R & a daily driver AU Foulcan. I know which I choose when I have a 1000km trip to do & I know which I choose when I want to go the the track.

of course it's the best car ever, I read it in the paper...

if your don't believe so you're UNAUSTRALIAN!!!!

But seriously, let them go for it if you ask me. It keeps a few people in jobs, who might otherwise be out of work. Keeps marketing companies getting richer. Keeps television networks in business via television advertising, etc. It's still good for the country.

3. You have to give credit to the local stuff for their fitness for purpose. They are essentially a cheap, large car the likes of which no other country makes. OK, they aren't BMW's, or Lexus', but do you really expect that for $35k?

Read my post earlier. BMW's are only expensive because of the gov't tax put on them. Go to Germany and you'll see that they are the equivelant to Holden and Ford Australia.

if we are comparing holdens to skylines then f**k yas all

i would rather have a mazda 3 turbo for a few grand more, it would be more fun to drive.

oops i mean r34 turbo

i think holden havent done anything to special with this new hunk of shit they have made, they spent over 1 billion dollars, f**k i dont even know how to write 1 billion 1000000000000000000000000000000 lol

anyway its a mix of a ba, 380 and there old holden, nothing special really

interior is ok i guess but f**k nothin to sprog your pants about. i would rather have a ford if i was in that kind of market

but does anyone know how many kw the gts hsv will have?

i wonder what the 2007 ford will look like? i think it will rip this pile of shizzle apart =)

Read my post earlier. BMW's are only expensive because of the gov't tax put on them. Go to Germany and you'll see that they are the equivelant to Holden and Ford Australia.

Exactly, the GOVT puts a huge tax on these "luxury" vehicles to try and keep the Aust car industry ticking along. What they don't realise is that economically its very bad to keep inefficient industries floating due to import taxes. In America, for example, you can buy a brand new 330i for about A$50,000. You can get a 325i for just under A$40,000. And I bet if they sold the 320i there (they don't becuase yanks don't want 4cyl) it would be closer to A$30,000.

QUOTE(Sky is the Limit)

It was eventually decided that the new formula would revolve around the Holden Commodore

and the Ford Falcon. At the time Australia lacked the technology to develop 2 litre engines

like those used in the British Touring Car Championship, and it was decided that turbos were

too costly for many teams to run. Both the Sierra RS500 and Skyline GT-R were costing

around AU$500,000 for a competitive car. That kind of cost was well beyond most of the

privateer teams. The v8 was the cheapest option to develop and race in Australia.

Holden and Ford took the unprecedented step of releasing a joint letter to CAMS during

Bathurst – telling them to get their act together and set the rules for 1993, or Holden and Ford

would consider other forms of racing (NASCAR / AUSCAR)

Just checked the book, I was sorta wrong before ToF sounds like it was a bit of both :laugh:

while cost was a factor , given the number of private entries running sierras at the time , it didnt seem they had much of a problem . Cost was really used as psudo justification . The main issue was the lack of competiveness of the domestic cars and growing lack of support for the formula from the mainstream australian public because of it.

Read my post earlier. BMW's are only expensive because of the gov't tax put on them. Go to Germany and you'll see that they are the equivelant to Holden and Ford Australia.

Import duty on cars is now at 10% By historic & international standards this is quite low. Your LTD/Caprice/GT-P/HSV or whatever will still carry the same luxury car tax as an import - it is a tax on the car which is not based on its country of origin. So making the argument that a Holden and/or a Ford should be the same as a luxury German car is erroneous. It has been a very long time since Australian manufacturers have been able to hide behind trade barriers.

And, by the by, the proleteriat in Germany drive Fords/Opels/VW's, not BMW's and Mercedes Benz'

Exactly, the GOVT puts a huge tax on these "luxury" vehicles to try and keep the Aust car industry ticking along.

The threshhold for this is $57,000.. meaning that if these BMW's came in into the country under these prices, the tax would not be applied. They don't.

The cost is in the shipping and extra cost to make the car applicable to the Australian market, which pushes it over $57k.

I am not sure if that is really applicable to this argument, that "we'd all be driving BMW's if holden didn't exist".

while cost was a factor , given the number of private entries running sierras at the time , it didnt seem they had much of a problem . Cost was really used as psudo justification . The main issue was the lack of competiveness of the domestic cars and growing lack of support for the formula from the mainstream australian public because of it.

My memory is a bit befuddled by old age & infirmary (& doubtless too much beer), but other than Kevin Waldock Playscape/Blast Dynamics example I can't really remember any privateer Sierra's that were around in 92 and campaigned on a regular basis. Glenn Seton & Dick Johnson had Ford support, as did Colin Bond. Tony Longhurst had switched back to M3's by 92. OF course Bob Forbes GIO GT-R was the sole privateer example to ever run in Aus.

People forget that during the mid nineties, thanks in part the the crap economy, top level motorsport in Australia nearly died. When teams like Gibson Motorsport & Glenn Seton Racing cannot find major sponsors then there are real problems. Not like now where 888 racing looks to have signed up Vodafone for $8million PER YEAR. Cripes.

As for the comment: Australia lacked the technology to develop the 2L engines. Eh? DJR at the time were making 2L turbo charged Sierra motors as good as anyone in the world. The MOTEC engine management system is after all Australian. Perkins Engineering didn't lack anything for developing motors. Bo Seton & Gibson Motorsport knew a little about engines too. There is nothing in a 2L rev & compression ratio restricted motor that is foreign to the best Australian engine builders. They tried to keep 2L formula alive in Australia. Not enough people cared. A shame, really.

Edited by djr81
call me silly, however I believe the cars somehow have to get from Germany to Australia - but yes, they do get slapped with extra tax.

Actually, Predator, there is a fair chance that the BMW you may covet is made in South Africa, or the US. Just like those shiney new Toyota Hilux's come out of Thailand....

good point...

or in fact 3/4 of the parts for the "Australian" VE commodore that come from Korea and other SE Asian parts suppliers :P I read somewhere that the new commodore is actually the "least australian" ever, in terms of parts that come from Australian suppliers

good point...

or in fact 3/4 of the parts for the "Australian" VE commodore that come from Korea and other SE Asian parts suppliers :P I read somewhere that the new commodore is actually the "least" australian ever, in terms of parts that come from Australian suppliers

You are 100% right. What is killing the Australian component supply industry at the moment is cheap imports from China. How can they compete with companies that pay their workers stuff all an hour, don't expect to make a profit & benefit from a government mandated fixed & artificially low exchange rate?

To anyone who may get fired up by that, just go down to the local hardware shop & buy some cheap, shiney Chinese shit. It will make you feel better. :D

to give you a bit of an idea on the what the chinese get paid, i work in the bike industry (which 90% of comes from asia). the workers in most factories get paid about $70 a month, and pay $20 of that in rent. now think of the standard wage of an aussie. most people earn that before lunch time (some luck pricks have earn't that in the time it takes them to pick their nose).

the other thing that annoys me is companies that charge twice as much for the same item. i have seen it in both car and bike parts. some stuff even had the same packaging, with just a different brand sticker at the top, but was made in the same spot. the bike industry is full of this. only 4 bike companies make their own bikes, and the rest are made by those companies. and 1 parts company will make about 20 different brand parts (all the same part, just with different brand names on them, and about 50% difference in price).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...