Jump to content
SAU Community

Recommended Posts

lol ok ash. if you're going to nit pick at every post of mine, good luck.

I asked a question, hence the "?"

Because as khunjeng stated, the SAU stickers do not work the way other stickers with a backing sheet do.

Sarah put mine on fine, but she still didnt do it the way stickers with a backing sheet are supposed to work

And if your gonna try and assume things off every post of mine, then good luck to you aswell.

I have no idea what "sarahs" way is. Am i expected to know?

Your assuming i do know... and i most certainly do not :no:

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

And if your gonna try and assume things off every post of mine, then good luck to you aswell.

I have no idea what "sarahs" way is. Am i expected to know?

Your assuming i do know... and i most certainly do not :no:

i got paul's gf to do mine, , and she had to pick each letter off 1 by 1 and do it that way....

sorry, i thought i had typed it clearly enough in my post...I shouldn't have assumed you read the thread before posting :)

sorry, i thought i had typed it clearly enough in my post...I shouldn't have assumed you read the thread before posting :no:

as i said guys, i didnt have to do it that way for all of them, but it is certainly a safe and effective way to do it.

so far I have had a few themes come throuh...but none help my sticker efort. I have tried to peal them off slow and the thing just doesn't work damn it!

hard to say what the problem is then, possibly the user if so many people have managed to do it with no troubles.

but no one can be sure i guess

my stickers sucked! took a while to get them on. washed windows with the glass cleaner stuff. got the stickers onto the transfer sheet by sitting at the table with a rasor blade and slowly lifting the stickers off. didnt destroy 1. even the dot on the i came off.

anyone attempt this, i take no responsability for u slicin ur fingers off. :wave:

cyas tomorroz

in this thread is the only place I have heard of people not having trouble with those stickers.

The way I did mine, after I realized that they wanted to stick to the back sheet not the front, was peel it really really really really slowly, and when a letter starts to stick to the back get under the corner of it with a fingernail while you have as much of the two sheets on the letter as possible..

if that makes sense.. I suppose pictures paint a thousand words...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...