Jump to content
SAU Community

Recommended Posts

Got some fitment issues up the front. 20 * 8.5 +25 rims.

The wheel is physically too large in rolling diameter and is rubbing on the top suspension arm. So I need to hit the drawing board.

Anyway the test fit...

upload1o.jpg

img1129d.jpg

What are you guys thinking? Improvement or not? I am going to slam the car back to the ground with the new rims, remove the wing, and try and line up a carbon fibre duck wing and roof spoiler.

I think the new rims need a new look...

^^^^^^^^^^^^^^^

yea they look hotttt,

slam to the ground, get the duck lip if you want, but i dont know about the roof spoiler i dont really like the look of them

but definently make these rims fit and slam the car to the ground :D

what size tyre on the front?

i like it but i dont know how you'll get around the front lip been a mile from the road purely because of the size of the rim you wont be able to reduce it much.

still nice wheels an all.

ROOF SPOILERS ARE FKN AWESOME.

Yeh im worried this suspension arm might be the death of me!

I took some pics to show it. Hopefully with a 5mm spacer on the front and a stretch say, 215/30/20 on the front. But turning still might pose problems, and I think full lock is out of the question lol.

But I mean come on bulk people have fitted 20s before to 33's (all be it chromies :(), surely there is an easy solution. Aftermarket suspension arm (thats less bulky)?

Oh and the tire on the front atm is a 245/35/20 I think. I wont go that wide on the front with the new tire, which will save me some space... but the new tire will have tread aswell (where thisone is down to the wire), so i fear it will even itself out abit there!

sky121001.jpg

The Cannon Exhaust is about to go though. Looking to cut the tip off and weld something a bit quieter on the end to try and get a crisper less droney note

cool lower lip on the bar man, wheres that from?? accentuates the front even more than normal...which im starting to love :)

cool lower lip on the bar man, wheres that from?? accentuates the front even more than normal...which im starting to love :)

Just Jap. Took a lil bit of trimming and adding to fit. Otherwise it aint too bad. Just replaces the factory lip. Gives it more of a sporty look to the front without looking over the top whilst keeping the strength and fit of the factory frontbar.

Luke

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...