Jump to content
SAU Community

Recommended Posts

Hey guys,

just a quick question, i know i can purchase a hicas lock bar, but i was looking on nengun and they sell an electronic hicas lock kit. I am wondering what are the differences between the two, besides one being pysical and one being electronic.

What is the better option??

thanks guys

Todd

Link to comment
https://www.sau.com.au/forums/topic/132138-hicas-lock-kit/
Share on other sites

If you use the lock bar, you can remove the engine bay mounted solenoid, lines and rack, removing about 20 kg i have been told. The problem with this is you disconnect the hicas computer goes a bit heavy at slow speeds.

Using the tomei kit you will lock the hicas and have no problems with steering going heavy, so what i have done is i have bought both, ill remobe the whole system, and install the computer box so i have the best of both worlds.

Link to comment
https://www.sau.com.au/forums/topic/132138-hicas-lock-kit/#findComment-2446865
Share on other sites

I just purchased my R33 GTST last week, and i've noticed that the HICAS llight comes on everynow and then.

After reading here, it seems that if that light goes on, then there is problems. However i don't notice any real change in the rear end's stability.

I have an aftermarket steering wheel on it, so referring to the FAQ's it means it wont work properly anyway, but should i get a lock kit (as GTRGeoff provides) and simply forget about the bloody thing?

Link to comment
https://www.sau.com.au/forums/topic/132138-hicas-lock-kit/#findComment-2455070
Share on other sites

Yep have just removed mine and installed the lock bar on a R32 GTR and connected up the power steering fluid hoses as per the DIY on this forum.

And apart from the hicas light being on i had no other problems with the removal of the Hicas. And yes just over 20kgs removed from the car doing it this way and i can every change my oil filter and not dislocate every joint in my hand and arm.

Link to comment
https://www.sau.com.au/forums/topic/132138-hicas-lock-kit/#findComment-2455871
Share on other sites

I just purchased my R33 GTST last week, and i've noticed that the HICAS llight comes on everynow and then.

After reading here, it seems that if that light goes on, then there is problems. However i don't notice any real change in the rear end's stability.

I have an aftermarket steering wheel on it, so referring to the FAQ's it means it wont work properly anyway, but should i get a lock kit (as GTRGeoff provides) and simply forget about the bloody thing?

as above.

Anyone?

Link to comment
https://www.sau.com.au/forums/topic/132138-hicas-lock-kit/#findComment-2457776
Share on other sites

the only real problem is that it causes heavy steering at low speeds after a while of turning the car on.

im currently selling lock bars for $120

GTRgeoff is a good reliable source though, has been selling for a while

PM me if interested.

Link to comment
https://www.sau.com.au/forums/topic/132138-hicas-lock-kit/#findComment-2458268
Share on other sites

my car sometimes has a mind of it's own on some roads where there are those kinda ruts? like it's a full proper lane, but just had a lot of use, so there is like a wave in the road. My car will ALWAYS wander whenever there is a wavey road... would that be my HICAS? kinda tramlining of sorts...

Link to comment
https://www.sau.com.au/forums/topic/132138-hicas-lock-kit/#findComment-2458783
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...