Jump to content
SAU Community

Recommended Posts

Hey,

Coming home from a mates party last night out in the mountain, let a mate drive my car home with me in at as I don't drink drive, well anyway the results of a amatuer and a gtr = bang

He was braking into and out of the corner that he approached to quickly, so shifted the weight onto the front, back end stepped out as we were turning, he panicked quickly countrsteered and let it snap back then jump on brakes and off the road we went.

2 trees and a fence and we were pulled up.

anyway what do you reckon, is it repairable or would you just strip it and sell it for parts?

cheers

1.jpg

2.jpg

Edited by Evasion
Link to comment
https://www.sau.com.au/forums/topic/132713-crashed-32-gtr/
Share on other sites

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

first I would get a damage estimate, then I would go and give that estimate to my "friend" and finally whoop his ass to pluto!

I would think, that maybe you could repair it, but it will cost you heaps - and insurance wont cover you as you werent driving it......

Also should add, a rule that I used to have when I was drinking was that I never take my car out. If at all I was gonna be drinking and if I had to drive to get to the party or place or whatever, I take my old bomb, that way if I had to leave it there, I wouldnt be too worried about something happening to my car....

Edited by emsta2003
Link to comment
https://www.sau.com.au/forums/topic/132713-crashed-32-gtr/#findComment-2458684
Share on other sites

Insurance?

Could say you were driving.....

Either way that don't look too repairable but then again i've seen some cars totaled or what i thought was totaled and they end up being repairable. I'd get a few opinions from some bodyshops.

PS lesson learnt (don't mean that in a harsh way) to never let friend drive car.

Link to comment
https://www.sau.com.au/forums/topic/132713-crashed-32-gtr/#findComment-2458731
Share on other sites

fuuuuuuuuuuuccccccccccccccckkkkkkkkkk!!!!!!!!!!!! was ur mate drunk aswell?????

see if insurance pays u out..... buy it back off them for next to nothing and sell it in parts... u might be lucky to make some money that way

happy ur not hurt :)

Link to comment
https://www.sau.com.au/forums/topic/132713-crashed-32-gtr/#findComment-2458756
Share on other sites

Whoa....that sucks. You seem so blasé about it all, I could imagine myself in hysterics if the shoe was on the other foot.

Yeh I wouldn't say I'm not to fussed more so on the depressive side, the car was to be sold in a week or 2 for 17,500 thats money that could have been in my account ready for another car, but now there is this major inconvience with payment from said driver which will need discussing and time frame when I get it etc,

What can you do? thinking about just f**ks with your head.

Insurance is a negative, Haven't got any as I never thought "I" would need to claim

Edited by Evasion
Link to comment
https://www.sau.com.au/forums/topic/132713-crashed-32-gtr/#findComment-2458906
Share on other sites

Ouch.. good to see your ok, as everyone said - write off for sure!..

"Insurance is a negative" - as in you don't have any, or they aren't going to cover you..

Good luck with getting the money out of your mate.. could be alittle difficult trying to get money from them...

Link to comment
https://www.sau.com.au/forums/topic/132713-crashed-32-gtr/#findComment-2458933
Share on other sites

well the good news is it's not the end of the world. if your friend is a good one he will offer to either take the car off your hands for $17,500 and wreck/repair it himself, of let you wreck it out and he will pay you for the difference between what you get at the $17,500 you were selling it for.

if he is not going to be a man, and doesn't offer to compensate you for his f**k up then there is not much you can do, but wreck it out and move on.

Link to comment
https://www.sau.com.au/forums/topic/132713-crashed-32-gtr/#findComment-2459130
Share on other sites

Well as everyone has said lucky your not hurt.

But im guessin you can't do or expect to much from your mate as by the looks of the damage you guys were fair flying, and guessing again you'd have given him permission to do so.....?

Link to comment
https://www.sau.com.au/forums/topic/132713-crashed-32-gtr/#findComment-2459251
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...