Jump to content
SAU Community

Recommended Posts

hi all,

i'm new to skyline cars and i'm thinking of buying an R32 class, either gt-t or gts-t, but not gt-r.

maybe it has been discussed before in this forum. so i'm sorry if i ask the same thing again. i was just wondering about R32 fuel consumption. how much fuel does it consume say if i just drive it normally with low boost. for everyday driving i mean.

thanks before for any replies. :P

Link to comment
https://www.sau.com.au/forums/topic/133299-r32-gt-t-fuel-consumption/
Share on other sites

hi all,

i'm new to skyline cars and i'm thinking of buying an R32 class, either gt-t or gts-t, but not gt-r.

maybe it has been discussed before in this forum. so i'm sorry if i ask the same thing again. i was just wondering about R32 fuel consumption. how much fuel does it consume say if i just drive it normally with low boost. for everyday driving i mean.

thanks before for any replies. :ermm:

hey, I can get about 450 - 500ks to a tank with just normal driving.. well it was hwy driving. Full tank costs me about $80-90+ depending on petrol prices, and thats for premium.

So I guess its not TOO bad. I'm running 12psi too. But start driving it hard thats when you'll just chew through the petrol.

On my last full tank i got 420km when the fuel light came on (normal driving, not a lot of highway driving) with BP Ultimate.

My car is a 92' model GTS-t, with a cat-back exhaust and high-flow panel filter - so it's fairly stock. Haven't yet tested its highway economy :O

Steve.

Edited by R32_GODZILLA

Im only getting 270km~ and thats driving mon-fri in peak hour traffic. Although you can strongly smell premium at the back of the car. Running rich no doubt, will replace sparkplugs and clean afm to see if any changes occur

mods: apexi catback and apexi filter

hey guys , just thought of sharing infos , i get around 400kms per tank for bp ultimate and roughly 450kms per tank with shell, and thats just normal driving i thought earlier my fuel consumption was high, because i heard some doing 500+ looks like its pretty average

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...