Jump to content
SAU Community

Recommended Posts

hey, im new around here but was wondering if someone could decode this for me:

Chassis - HCR32-011224

Model - RCR32GASLM IC

COL? - KG1 G

I can't manage to get the FASt software! but from what i read above that this should be an automatic but its a manual. wondering if anything else has changed! (just looking at buying the car)

Thanks in advance

Anthony

South:

The vehicle deatils are as follows:

Build Date: 07/1989

Colour Code: KG1

Interior: G

Spec: M-Spec

Trans: Auto

Thanks very much for the info :D

Im taking that the KG1 is the silver colour? they must have done a switch on the transmision which makes me worry about the motor and the k's!

Anthony

  • 2 weeks later...
I do not have a C:/WINDOWS/directory, I followed the steps to what i could understand it. I put the NSFASTKY.INI file in C:/ .

Is this the same thing?

PS: I',m using XP

not c:windowsdirectory

its supposed to read put it in c:windows

(windows directory) he added a by mistake after windows (typo)

not c:windowsdirectory

 

its supposed to read put it in c:windows  

 

(windows directory) he added a  by mistake after windows (typo)

Got that sorted last week :D

i think it has EVERY nissan ever made on them, you just need the correct cd, each cd does different cars .. i'll try find out which cd has the datsun 1600 510 series for you ..

It covers from 1979 and onwards.

  • 2 weeks later...
yes thats exactly what it means......which might be a problem for compliance or 15yo import if its not in the country yet

Then something is going on. coz i am importing this under the 15 year rule becoz it's suppose to be a 1990 may GTR.

it has already got import approval could that date be wrong?

nOOSE

I was hoping that someone can help me out also (have embarrassing dial up in the country which is very slow)

ECR33-051375

GGKBRTR33VDA-U---

I know what the bulk of the model numbers are but not sure on the last few digits are -U---

my rego papers say it is a 1995 my Green plate say 11/1994 and I just need to know if the car is series 1 or series 1.5

greatly appricaited

I was hoping that someone can help me out also (have embarrassing dial up in the country which is very slow)

ECR33-051375

GGKBRTR33VDA-U---

I know what the bulk of the model numbers are but not sure on the last few digits are  -U---  

my rego papers say it is a 1995 my Green plate say 11/1994 and I just need to know if the car is series 1 or series 1.5  

greatly appricaited

It was made in 93/08 - so it's actually a 1993 car!

Edit: Cancel that - I think I screwed up entering the code!

Ian

ohh and you got me all excited then thinking someone mght have an answer for me ;)

Sorry about that.

When I type yhe number in that you gave (ECR33-051375) it comes back with "model series can not be found for this vin no"

The one that I actuall commented on was ECR33-005137 - I'd left the five of the end, and had an extra zero at the front.

Are sure your number is correct and that you don't have a digit wrong????

Ian

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...