Jump to content
SAU Community

Recommended Posts

looks better need to paint the manifold heat shied black and get rid of that red fuel hose. maybe even give the firewall a good clean

should also reroute the fuel inlet house between the last runners.

the missus is back home too so you can grab that motor whenever ya ready

everyone i am going to get a price for the accomadation for the easter cruise in airlie. can i get numbers for who is interested.

i am looking at where phil & i stayed as it was good for the bbq and safe to park cars :thumbsup:

do palmyra drags open friday nights?

looks better need to paint the manifold heat shied black and get rid of that red fuel hose. maybe even give the firewall a good clean

should also reroute the fuel inlet house between the last runners.

the missus is back home too so you can grab that motor whenever ya ready

everyone i am going to get a price for the accomadation for the easter cruise in airlie. can i get numbers for who is interested.

i am looking at where phil & i stayed as it was good for the bbq and safe to park cars :thumbsup:

do palmyra drags open friday nights?

Yeah the manifold heat sheild is the next thing on the list, its only a little job so will give it a spray. Gonna make up a stainless heat shield one day maybe, but for now a paintjob will do

Fuel hose is up there to, should get off my ass and just go buy some haha. Will probably get a photo of the engine when the suns hitting it tomorrow. The whole bay needs a good clean but it'll get a respray and tidy up sometime next year, just not sure when at the moment

I'll probably not be able to townsville till about the 9th of December, let me know if you want the money for it now or cash when I pick it up

Let me know if thats no good and I'll organise to get it picked up

Palmyra opens for Test and Tune's every second friday night from memory. Had one the friday just gone

And the Airlie thing sounds good, your hotel was sweet lol

Edited by 89CAL

i am hoping palmyra is open good friday so i can have a run against you guys.

that hotel is sweet, wonder if we'll get kicked out this time.

engine is all good to be picked up and paid for then mate.

i am hoping palmyra is open good friday so i can have a run against you guys.

that hotel is sweet, wonder if we'll get kicked out this time.

engine is all good to be picked up and paid for then mate.

To easy, I'll be in touch before I head up anyway

So you planning good friday drags here then up to Airlie Saturday? Not a bad idea, I'll see if the calender is up that far in advance

yeah thats the plan so far, hopefully a few more townsville guys come this time.

i am going to start getting prices for accomadation in airlie beach for the easter cruise, just after numbers so i can get a more accurate figure.

so far the plan is to go mackay on good friday and race at palmyra drags if its open, then head to airlie on satday check into hotel, go for a drive get pics then let shenanigans begin.

2011 thread http://www.skylinesaustralia.com/forums/topic/353599-sau-2011-easter-weekend-in-airlie-beach/page__hl__sau+easter+__st__60

where i am looking at for accomadation http://www.marinashores-whitsundays.com/at_Marina_Shores_Home.html

prices off their site http://www.marinashores-whitsundays.com/check_availability_hotel6.asp?Region=360&Town=Airlie+Beach&hid=9178&numAdults=1&numChildren=0&numRooms=1&roomType=0&lid=1&toPage=all&item=3&tranHost=&tranURL=&selDayStart=7&selMonthStart=4&selYearStart=2012&selDayEnd=9&selMonthEnd=4&selYearEnd=2012

i hope we can get a decent discount for a large group but really $200-$300 for 2 nights is pretty goo in my books. i think it cost me & phil $160ea for the night.

i will start a dedicared thread if get enough interest.

Edited by robbo_rb180

Time for some more photos?

2011-11-23173512.jpg

2011-11-23173519.jpg

Looking good Cal not a bad colour choice i likey, i got a brand new set of Samco Radiator hoses and Samco Heater Hose kit in blue if your interested going cheap lol.thumbsup.gif

  • 2 weeks later...

I can't believe this town...

My Mate takes his car into my favorite fabrication shop

- contractor does some work instead of usual staff

- contractor wanker proceeds to bad mouth me even though he's never met me, seen my work, etc. He'd "just heard some things" while pulling himself over the counter

- calls my mate and asks the stupidest question (says the new bovs won't fit because the old one is in the way..?)

- then SNAPS the front grille clean in half, and tries to hide it by "melting" the plastic together with something like a soldering iron.

Grille is $600 unpainted from Nissan.

My mate is f**ken pissed, and I mean really pissed.

Dodgiest flamin mongrel in the world....

If I ever go back to his shop I'll be specifically asking for them to not let this clown near my car.

Mackay is full of dishonest shit stains.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...