Jump to content
SAU Community

Recommended Posts

It made a difference in sub hot range of temps, it shifted nicer than what was in the box, it didnt crunch and generally was a smooth fluid.

Got hot, stuck, and was dumped soon after.

Car came with a bottle of redline you cheeky shit!!!!!!!!!

I quote the guy from PPG's words about the gearset oil requirements for the gtr box.

"anything that's expensive will be perfect, you know. you pay through the nose for and it's weight is 75-140"

Looks like I am going to be running Brembo Brakes off a Nascar just waiting for old mate in the USA to get back to about shipping. They are the ducks nuts One piece monoblock calipers with titanium pistons, Big Piston 4 pot fronts 330mm rotors front and Small Piston 4 Pot Rears 300mm Rotors. Surprisingly cheap just have to get custom dog bones and lightweight rotors made, no biggie. Can't wait to test these out gonna put me through the windscreen.

Brembo_Front__Rear_Brake_Caliper_Set_Nascar_Arca.jpg

:wub: i want a set....... i'll just sell a kidney first :P . how much you want for gtr brembo rear setup??

Did Redline Exist when your Car was last on the road :P

:rofl2:

so everyones found the redline good? need to put oil in the sil80's g/box before i start it.

:wub: i want a set....... i'll just sell a kidney first :P . how much you want for gtr brembo rear setup?? :rofl2: so everyones found the redline good? need to put oil in the sil80's g/box before i start it.

Yeah i dunno have to ask my brother what he wants for them Rear Brembo's lol

Trying to find a SR20 Neo VVL head for my engine so I can punch out more HP, damn near impossible to find one with out buying the whole engine :unsure:. So if you know where I can get one let me know.

Gonna pull the engine apart soon for a full rebuild just to make sure it can handle the power I want, new bearings, rings etc. Get the crank balanced and heat treated and order a bigger turbo for the beast. I want nothing less than 600rwhp and the gearbox ...well have to suck up to the wife to see if I can get a 6 speed sequential when the time comes. :wub:

I'm at work. And I've already got to make 3 trips back and forth this week. Wasn't keen to turn that into 4 lol

I don't want to know how drunk she was lol

aha fair enough, i met her but i don't think she was that wasted. Some other chick flashed her tits though which was very unexpected and kind of awkward as Emma was right next to me..

aha fair enough, i met her but i don't think she was that wasted. Some other chick flashed her tits though which was very unexpected and kind of awkward as Emma was right next to me..

Nothing wrong with a bit of Boobie Flashing should be more of it I say, the world would be a happier place.

Trying to find a SR20 Neo VVL head for my engine so I can punch out more HP, damn near impossible to find one with out buying the whole engine :unsure:. So if you know where I can get one let me know.

Gonna pull the engine apart soon for a full rebuild just to make sure it can handle the power I want, new bearings, rings etc. Get the crank balanced and heat treated and order a bigger turbo for the beast. I want nothing less than 600rwhp and the gearbox ...well have to suck up to the wife to see if I can get a 6 speed sequential when the time comes. :wub:

which model head you after p11 or p12?

maybe easier to buy a complete mazworx 2.3L setup with a big precision....

here a decent thread on NS http://www.nissansil...pic=372528&st=0

a mate up here paid $3.5k for a whole gt x-trail motor just to get a p12 head

that motor you have should do 300+kw on e85 with a 3076r and still be responsive.

if you aiming for 600 and want it to be a reliable drifter do a LSx conversion be cheaper than 600hp sr and more reliable

Edited by robbo_rb180

Yeah dunno got weigh up the cost of a new head or just do solid lifter conversion and get the head ported out to within a inch of it's life. Don't wanna do a engine conversion as I don't wanna mess the balance up of the car + want it to weigh as less as possible. See how I go gotta do some more research.

I know I said I wasn't gonna buy em but I did just order the whole Ikeya Formula Suspension Catalogue set-up for my 180SX, every arm,bush etc. Gotta have the best of the best on my ride lol now I'm really poor. No more shopping for at least 3 months now :no: .

I know I said I wasn't gonna buy em but I did just order the whole Ikeya Formula Suspension Catalogue set-up for my 180SX, every arm,bush etc. Gotta have the best of the best on my ride lol now I'm really poor. No more shopping for at least 3 months now :no: .

You said no more parts this year about 4 posts ago?

Yeah I'm a sucker for Bargins lol. Nah just wanna get my car rolling so I can put it on a trailer and take it the old boys to start on the cage and chassis welding. I got the shits with all the stock parts laying around my house so I done a trip to the dump so I have no suspension parts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...