Jump to content
SAU Community

Recommended Posts

Ok, his the thing, my brother will soon be getting a 20 grand loan, and was looking a sporty hatch backs. namely the pulsar gti-r. Are they any good in terms of performance as well as a every day car? Are performance mods are easy to find such as Fmic and aftermarket ecu's + pricing? what about the fuel consumption? and lastly what do you guys think? should he just abondon the idea and go for the other hatchs.

Link to comment
https://www.sau.com.au/forums/topic/144305-pulsar-gti-r-worth-it/
Share on other sites

They are mini GTRs with huge potential

Has the best SR20 with quad throttle bodies with minor mods can run 12 sec

My mate has the motor in a SSS pulsar running 200rwkw says it has s**t fuel economy even at low boost

but stock for stock in terms of performance they can beat a gtst no worries

if you need a 20grand loan for a car, then i'd suggest your probably not in the finantial situation to get a car with the intentions of modifying it...

i know its not what you want to hear, but its the truth and needs to be said at some stage..

considered an R31? you could even wach in a VLT engine and that thing would hammer for less than 5k all up

I can't believe no-one's said this yet: I was looking at GTIR's for a while before I got the R33. What turned me off was everyone talking about how fragile the gearboxes are, and how much of a shit they are to change if they die.

Ok, his the thing, my brother will soon be getting a 20 grand loan, and was looking a sporty hatch backs. namely the pulsar gti-r. Are they any good in terms of performance as well as a every day car? Are performance mods are easy to find such as Fmic and aftermarket ecu's + pricing? what about the fuel consumption? and lastly what do you guys think? should he just abondon the idea and go for the other hatchs.

gay lookin standars interior but nice little pocket rocket of a car!

hey bud, ye u gotta luv the baby gtr's aye. 4WD, sr20, light as shit = awesome performance, but on the same note, it comes down to personal preference. are you after the sleek, sporty look of a skyline or a little boxy thing? Mind you ive been in both and although a stock gti-r would beat a stock skyline purely on power to weight, i wudnt say it wud leave it for dead.

Edited by moonus

My brother owns a 1990 model, interior is drab to the max and also bare. Drive position is weird compared to my GTR. He bought it last year and is now selling it because he is poor :P

Its pretty standard with a new Exedy clutch and massive FMIC. He wants about $16k for it I think....

Another thing i heard was that replacing the clutch was a bummer, having to take the whole engine out, right as its more based on Fwd engine layout ,is it true, and if so than might as well spend a decent amount cash, as the clutch has to last atleast 2yrs of punishment.

I also ask you, aboout how you would approach this situation on blown gear boxes, should he just upgrade gears once power levels are up around 180kwaw or wait till about 220kw mark, than rahter to find out the hard way.

Thanks guys for your replies :(

i had a gtir for 3 years before selling it 6 months ago to finance my r34....

Ok, his the thing, my brother will soon be getting a 20 grand loan, and was looking a sporty hatch backs. namely the pulsar gti-r. Are they any good in terms of performance as well as a every day car? Are performance mods are easy to find such as Fmic and aftermarket ecu's + pricing? what about the fuel consumption? and lastly what do you guys think? should he just abondon the idea and go for the other hatchs.

GTIR is a great choice for a hatch. 20k seems a little generous....you'd be getting a farily well modified one for that money. think more like 10-15k for a basic one with wheels/exhaust/boost.

Performance wise, it'll beat a stock skyline (non gtr) hand down. Mods are just as easy to find as the skyline e.g. FMICs, ECUs, split dumps, clutches etc.

Fuel consumption is SHIT. The stock ECU is tuned a little rich and will really chew through the juice if you hammer around.

IMHO it'd be my first choice for a performance car under 15k...you have to get over the styling though :P

jump onto to pulsar.org.au

actually go to http://www.gtiroz.net/ then the discussion wont be muddled by talk on the aussie delivered models you get on pulsar.org

There's a lot of very knowledgable guys on there, as well as a good for sale section.

a mate of mine has one, on 7psi and just exhaust and pod filter. IT HAMMERS!!

well actually it'd be ~10PSI, as this was stock boost. Its a tough SR20 in these things. Different internals than the SRs delivered on the silvias etc. of the time. Many/most run ~14psi day in day out with no issues.

I can't believe no-one's said this yet: I was looking at GTIR's for a while before I got the R33. What turned me off was everyone talking about how fragile the gearboxes are, and how much of a shit they are to change if they die.

The gearbox is the weak point, but i'm confidant they dont break without "active" driver participation. Mine stripped 6 teeth off 2nd gear after a day at Wakefield. Most of the enthusiastic drivers on gtiroz.net have busted a GB. Regular 2nd hand box runs about $1k. "Unbreakable" PAR gearset replacement runs about $4-5k for the serious.

140kg is the weight of the gearbox IIRC

ask people about how fun it is changing the clutch

must be lighter than that, cause i carried one up 3 flights of stairs! Still heavy though.

GB can be removed and clutch changed WITHOUT taking the engine out ONLY IF the mechanic has done it before and knows the trick. Most shops will just drop the whole engine/GB together. Last cluthc i had installed was about $1200 labour for this reason.

I only changed cars because i have the money now for a newer car with low KMs. I would have driven the GTIR for another 3 years if a decent R34 had not come up.

Watch out for ancillary parts that have worn out i.e. water pump (common problem at ~150kms), alternator, starter motor, CV joints. Also watch out for cooling issues i.e. head gasket, radiator probs etc. which could lead to catastophe.

  • 4 weeks later...

although the GtiR was a bit of a failure on the rally scene they still make a great car out on the open road and the traction they get off the line is unbelievable.

If you are looking at raising the power you realy need to budget for a decent break upgrade as the factory setup is'nt to good.

The only downside to these cars are the looks. you either love it or hate it :laugh:

although the GtiR was a bit of a failure on the rally scene they still make a great car out on the open road

Their biggest issue was the alloy engines, which just couldn't handle the heat of rallying.

From what I've heard (and I can't even remember the GTiRs these days) the cars were bloody quick for the first few days, but the engines just couldn't make it to the finish line.

Cast iron FTW, huh? :laugh:

its possible to change the clutch without taking out engine/gearbox

a relo of mine done it, he had heaps of fun

i heard they understeered cos of weight distribution

anyways i rekon they're a good buy considering you can get a good one for ~$12k-$15k

  • 4 months later...
Their biggest issue was the alloy engines, which just couldn't handle the heat of rallying.

From what I've heard (and I can't even remember the GTiRs these days) the cars were bloody quick for the first few days, but the engines just couldn't make it to the finish line.

Cast iron FTW, huh? :rofl:

Thats right (kinda!), the engines themselves were fine, but being cramped in a small engine bay led to overheating and subsequent withdrawal from rallying. Their handling was not so good either as the drivers couldn't get a decent suspension setup the compete with the leading cars, weight bias to the front of the car causing understeer... along those lines. The quick withdrawal from rallying pretty much made the car a failure in the publics eye, which is why it was never very well supported in the aftermarket in Japan.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Are you 100% sure this isn't tune related?
    • 140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...