Jump to content
SAU Community

Recommended Posts

Hi everyone.

I'm new to these forums and have joined because I'm looking at buying an R32 GT-R. Went for a drive the other day, and surprise surprise they're utterly brilliant.

However much fun they are to drive though, doesn't make them practical. I'd like to buy one, but I'm looking for a daily driver and so was wondering how people with a GT-R, in particular an R32, got on living with one and driving it as a daily driver?

I've read a lot of the info on here so far, there is some very in depth info which is quite useful, but if I use the car as a daily driver, its obviously going to do a few more K's. Is there some parts that are more likely to break with regular driving? If so, what are they? They're also getting older, does this have an impact on getting parts, cost of parts, etc?

Car I'm looking at has just been imported by a dealer, includes 12 months warranty and 12 months servicing, but I still want to be sure before I jump in. Is there anything I should get them to change before I buy it? Its just been imported, so is due to go through compliance next week.

My last car (which was written off thanks to a lady running up my rear :P ) was a BMW M535, and while I loved it, every time I looked at it something new broke that needed an expensive replacement part. I don't want that again, hence making sure I do all my research!

Thanks in advance for the help and advice.

Link to comment
https://www.sau.com.au/forums/topic/149980-living-with-an-r32-gt-r/
Share on other sites

when i bought my 32 gtr i was only going to use it for weekends and for the occasional thrashing for a bit of fun, but since then it has become a daily driver. once you get past the fact that its and older car and you need to make sure that you are on top of it when it comes to servicing etc they are built tough and will handle a bit of punnishment. parts are not so hard to find as they seem to be becoming fairly popular again, and with so many p platers still wet behind the ears buying them (well in my area anyway) and smashing them means more parts for us!! not the sort of car you would want to drive fo 40min in stop start trafic everyday though.

hmm.. unless its a manufacturers warranty DO NOT under ANY circumstances put any weight of reliance on dealership warranty's and servicing.

Dealership warrantee's and servicing are not worth anything. The place I bought my car from gave me 1 year conditionless warranty. I bought it (R32 gtst) thinking sweet, its an old car and things are bound to give.. This way I can ride out the repairs for a year free of charge.

A week or so in after buying it the suspension got progressively worse. Took it back to the dealership and they changed the front suspension to second hand parts. It was "fixed" in their perspective. I disagree'd and took the car to pedders. They threw in the dodgiest brink of breaking parts so I changed the components myself :: $1500

A week after that the fuel pump gave. Took it back to them. They "fixed" the problem again. Turned out which my mechanic had to point out to me that they had thrown in a no name china brand fuel pump which didnt even have a fuel filter. It was so dodgy fuel pressure regularly dropped to ZERO when idling and driving.

All these times me having to bring the car back to the place was done through my own time and money. And during this time whilst, the car was running on crap parts which has obviously damaged the engine.

Bastards. I hope the dealership goes bankrupt and the director dies an early death.

So DONT rely on the warranty and servicing as a sales point. You'd want the servicing done at an independant performance shop of your choosing so you can be sure that the best of care is being taken with your car.

>> would you want to state or PM me the place you are looking to buy from? maybe if its the same place from where i bought the car from i can give u warning and tell you to steer clear

Edited by chinkeboi

Thanks for the heads up, but the dealership is actually owned by a mate of my dads that I know fairly well. Their idea of fixing problems is to replace them with the genuine parts, so I'm sure I'll be ok. I'm also in Adelaide, not sure where you are.

You make a good point on the servicing, taking it to another shop, and this will probably be what I'll do when I get it. Depends how long it takes me to find a decent one in Adelaide! :)

If people on here think they're pretty good as daily drivers, and I take it for a drive and make sure I'm happy with it after its been complied, then I'll probably grab it. Its only a daily, so it won't get too wild mods and won't be too much horsepower (compared to some I've seen, anyway).

Most important is: Is it fine and drivable in stop-start traffic? How does it go on fuel in the real world, especially after a couple of basic mods (exhaust, intake, boost controller and possibly new FMIC)? How does it go with a couple of mates in it (not good i guess, but then again I don't have to sit in the back! ;) )? How reliable is it?

My specs when I started looking for a car was for something I could get in and drive every day, no leaks, no reliability problems, no major hassles. I did want something I could carry a couple of mates in and some load, but thats ok, I'll just be selfish! Is a GT-R going to be like this, or is it just going to end up an endless money pit?

EDIT: A couple more posts! :P

I've been told it'll be ok on a trip, is this so? I plan on going for a couple of trips with it (Adel-Melb, Adel-Syd), as well as for work having to go out to Mallala, the Speedway, and up around the Murraylands once every couple of weekends. Sounds like its fine daily, which is good to hear!

Edited by bigkevracer
....in particular an R32, got on living with one and driving it as a daily driver?

Anyone answering this question needs to also state the level and type of any modifications. My car is very standard apart from exhaust - still relatively quiet - and suspension, which is quite stiff, but that's the way I like it. I'd have no problem using it as a daily driver in melbourne traffic, but don't need to.

Not sure if this will be any help to you,but I own an R33 GTR that I do 1000km a week in,its my company car,run the kids to school,then to sport,I use it for everything.

Oh,and it also has a Greddy T88H-38GK turbo and a triple plate clutch,1000cc inj ,makes over 420rwkw,waiting for a HKS DLI unit for a final tune.

My point is,ANYTHING can be your daily driver.

Buy the GTR.

My point is,ANYTHING can be your daily driver.

Buy the GTR.

haha... good point...

anything can be your daily driver, but I'm after a car that behaves well as a daily driver.

surely with those mods it drinks quite heavily?

i use my gtr for daily driving, in fact im on the road most of the time, i do half freeway, half city.

to be honest its a pain in the ass soemtimes, but when you are entering the freeway and you step on it, its f*kin great! unless theres a cop sitting there waiting.......

GET THE GTR!

steve

haha... good point...

anything can be your daily driver, but I'm after a car that behaves well as a daily driver.

surely with those mods it drinks quite heavily?

I get around 300-350km per tank,my S15 gets 500km and its got 240rwkw.I still drive the GTR before the S15.

Because of the size of the turbo,it drives like a stock 2.6l 6 cylinder UNDER 5500rpm,which is where it spends most of the day.This car is far easier for my wife to drive than my S15.

i get about 400km from 50l in a basically stock 33 vspec , its fine as a daily if stock , drives like a normal car if you potter around

the 32 is a good car but its getting old , expect some things to go wrong , particularly if its a early model 89-90 ish , there just even older

i looked at half a dozen 32s and found some reoccuring issues

rust - check wheel arches thoroly and all undercarige

leaking injectors

hicas and attessa issues

cv boots

couple with poor compression figures indicating engine problems , one turned out to have a cracked a piston on a valve loosing a cylinder and has been getting a rebuild the last 6 months

more but I cant realy remember at the moment

so at a minimum full inspection by a recognised gtr specialist performance workshop with compression test

and dont feel you need to look at a couple and make a decission , look at half a dozen if you can and dont settle for a substandard one

also do not neglect the 33 , its older , has several enginnering impovements to fix some of the problems in the 32 and just seems to hold up to age a bit better , probabky cause of the further development

Edited by arkon

yeah i use my R32 GTR as a daily driver. best as someone said previously is to keep ontop of stuff, dont wait till it breaks before you fix it!

its good if you have a second car u could use anytime as well incase something does go wrong, cuz wen it does its usually pretty expensive to fix lol

I DRIVE MY GTR EVERY DAY AND IM ON MY P'S IN MELBOURNE. THE ONLY TIME IT GETS A BIT TEDIOUS IS IN PEAK HOUR TRAFFIC PROBABLY DUE TO EXTRA HEAVY DUTY CLUTCH GET IT ON A FREEWAY AND FWOOOAAAH MATE ITS ALL GOOD TIME

BUY THE SKYLINE FOR SURE

I have an R32 GTR I use as a daily driver too. I've only had it little over a few months and a few gremlins have come along. I needed to get the clutch rebuilt and currently it's getting the ECU remapped. So far spent over 2 grand on these things so my advice is when buying a car as old as an R32, keep if you can about an extra quarter or fifth of it's value in your bank account. Keep it the way it is for a few months after you buy it and pay for any repairs that are needed. Service it regularly and it should be ok. Lucky for me my engine was rebuilt shortly before I bought mine, so far the engine has been running well except for the ECU needing to be remapped.

As for daily driving I do'nt need to drive far for work so it's not running up many km's. So far it's a money pit but I prefer to drive a money pit that is my choice and the car I like rather than some slow ass hatchback for the same price.

go the GTR, you only live once!

i feel that gtr is a pretty good daily driver, and when you want it to be a monster it will :(

which is ... how often, remind me! :no:

I normally get people riding my behind in their [insert random car]. Had a Liberty driver behind me this morning and I was doing nearly 10 over the limit because of him......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...