Jump to content
SAU Community

Recommended Posts

Hi everyone.

I'm new to these forums and have joined because I'm looking at buying an R32 GT-R. Went for a drive the other day, and surprise surprise they're utterly brilliant.

However much fun they are to drive though, doesn't make them practical. I'd like to buy one, but I'm looking for a daily driver and so was wondering how people with a GT-R, in particular an R32, got on living with one and driving it as a daily driver?

I've read a lot of the info on here so far, there is some very in depth info which is quite useful, but if I use the car as a daily driver, its obviously going to do a few more K's. Is there some parts that are more likely to break with regular driving? If so, what are they? They're also getting older, does this have an impact on getting parts, cost of parts, etc?

Car I'm looking at has just been imported by a dealer, includes 12 months warranty and 12 months servicing, but I still want to be sure before I jump in. Is there anything I should get them to change before I buy it? Its just been imported, so is due to go through compliance next week.

My last car (which was written off thanks to a lady running up my rear :P ) was a BMW M535, and while I loved it, every time I looked at it something new broke that needed an expensive replacement part. I don't want that again, hence making sure I do all my research!

Thanks in advance for the help and advice.

Link to comment
https://www.sau.com.au/forums/topic/149980-living-with-an-r32-gt-r/
Share on other sites

when i bought my 32 gtr i was only going to use it for weekends and for the occasional thrashing for a bit of fun, but since then it has become a daily driver. once you get past the fact that its and older car and you need to make sure that you are on top of it when it comes to servicing etc they are built tough and will handle a bit of punnishment. parts are not so hard to find as they seem to be becoming fairly popular again, and with so many p platers still wet behind the ears buying them (well in my area anyway) and smashing them means more parts for us!! not the sort of car you would want to drive fo 40min in stop start trafic everyday though.

hmm.. unless its a manufacturers warranty DO NOT under ANY circumstances put any weight of reliance on dealership warranty's and servicing.

Dealership warrantee's and servicing are not worth anything. The place I bought my car from gave me 1 year conditionless warranty. I bought it (R32 gtst) thinking sweet, its an old car and things are bound to give.. This way I can ride out the repairs for a year free of charge.

A week or so in after buying it the suspension got progressively worse. Took it back to the dealership and they changed the front suspension to second hand parts. It was "fixed" in their perspective. I disagree'd and took the car to pedders. They threw in the dodgiest brink of breaking parts so I changed the components myself :: $1500

A week after that the fuel pump gave. Took it back to them. They "fixed" the problem again. Turned out which my mechanic had to point out to me that they had thrown in a no name china brand fuel pump which didnt even have a fuel filter. It was so dodgy fuel pressure regularly dropped to ZERO when idling and driving.

All these times me having to bring the car back to the place was done through my own time and money. And during this time whilst, the car was running on crap parts which has obviously damaged the engine.

Bastards. I hope the dealership goes bankrupt and the director dies an early death.

So DONT rely on the warranty and servicing as a sales point. You'd want the servicing done at an independant performance shop of your choosing so you can be sure that the best of care is being taken with your car.

>> would you want to state or PM me the place you are looking to buy from? maybe if its the same place from where i bought the car from i can give u warning and tell you to steer clear

Edited by chinkeboi

Thanks for the heads up, but the dealership is actually owned by a mate of my dads that I know fairly well. Their idea of fixing problems is to replace them with the genuine parts, so I'm sure I'll be ok. I'm also in Adelaide, not sure where you are.

You make a good point on the servicing, taking it to another shop, and this will probably be what I'll do when I get it. Depends how long it takes me to find a decent one in Adelaide! :)

If people on here think they're pretty good as daily drivers, and I take it for a drive and make sure I'm happy with it after its been complied, then I'll probably grab it. Its only a daily, so it won't get too wild mods and won't be too much horsepower (compared to some I've seen, anyway).

Most important is: Is it fine and drivable in stop-start traffic? How does it go on fuel in the real world, especially after a couple of basic mods (exhaust, intake, boost controller and possibly new FMIC)? How does it go with a couple of mates in it (not good i guess, but then again I don't have to sit in the back! ;) )? How reliable is it?

My specs when I started looking for a car was for something I could get in and drive every day, no leaks, no reliability problems, no major hassles. I did want something I could carry a couple of mates in and some load, but thats ok, I'll just be selfish! Is a GT-R going to be like this, or is it just going to end up an endless money pit?

EDIT: A couple more posts! :P

I've been told it'll be ok on a trip, is this so? I plan on going for a couple of trips with it (Adel-Melb, Adel-Syd), as well as for work having to go out to Mallala, the Speedway, and up around the Murraylands once every couple of weekends. Sounds like its fine daily, which is good to hear!

Edited by bigkevracer
....in particular an R32, got on living with one and driving it as a daily driver?

Anyone answering this question needs to also state the level and type of any modifications. My car is very standard apart from exhaust - still relatively quiet - and suspension, which is quite stiff, but that's the way I like it. I'd have no problem using it as a daily driver in melbourne traffic, but don't need to.

Not sure if this will be any help to you,but I own an R33 GTR that I do 1000km a week in,its my company car,run the kids to school,then to sport,I use it for everything.

Oh,and it also has a Greddy T88H-38GK turbo and a triple plate clutch,1000cc inj ,makes over 420rwkw,waiting for a HKS DLI unit for a final tune.

My point is,ANYTHING can be your daily driver.

Buy the GTR.

My point is,ANYTHING can be your daily driver.

Buy the GTR.

haha... good point...

anything can be your daily driver, but I'm after a car that behaves well as a daily driver.

surely with those mods it drinks quite heavily?

i use my gtr for daily driving, in fact im on the road most of the time, i do half freeway, half city.

to be honest its a pain in the ass soemtimes, but when you are entering the freeway and you step on it, its f*kin great! unless theres a cop sitting there waiting.......

GET THE GTR!

steve

haha... good point...

anything can be your daily driver, but I'm after a car that behaves well as a daily driver.

surely with those mods it drinks quite heavily?

I get around 300-350km per tank,my S15 gets 500km and its got 240rwkw.I still drive the GTR before the S15.

Because of the size of the turbo,it drives like a stock 2.6l 6 cylinder UNDER 5500rpm,which is where it spends most of the day.This car is far easier for my wife to drive than my S15.

i get about 400km from 50l in a basically stock 33 vspec , its fine as a daily if stock , drives like a normal car if you potter around

the 32 is a good car but its getting old , expect some things to go wrong , particularly if its a early model 89-90 ish , there just even older

i looked at half a dozen 32s and found some reoccuring issues

rust - check wheel arches thoroly and all undercarige

leaking injectors

hicas and attessa issues

cv boots

couple with poor compression figures indicating engine problems , one turned out to have a cracked a piston on a valve loosing a cylinder and has been getting a rebuild the last 6 months

more but I cant realy remember at the moment

so at a minimum full inspection by a recognised gtr specialist performance workshop with compression test

and dont feel you need to look at a couple and make a decission , look at half a dozen if you can and dont settle for a substandard one

also do not neglect the 33 , its older , has several enginnering impovements to fix some of the problems in the 32 and just seems to hold up to age a bit better , probabky cause of the further development

Edited by arkon

yeah i use my R32 GTR as a daily driver. best as someone said previously is to keep ontop of stuff, dont wait till it breaks before you fix it!

its good if you have a second car u could use anytime as well incase something does go wrong, cuz wen it does its usually pretty expensive to fix lol

I DRIVE MY GTR EVERY DAY AND IM ON MY P'S IN MELBOURNE. THE ONLY TIME IT GETS A BIT TEDIOUS IS IN PEAK HOUR TRAFFIC PROBABLY DUE TO EXTRA HEAVY DUTY CLUTCH GET IT ON A FREEWAY AND FWOOOAAAH MATE ITS ALL GOOD TIME

BUY THE SKYLINE FOR SURE

I have an R32 GTR I use as a daily driver too. I've only had it little over a few months and a few gremlins have come along. I needed to get the clutch rebuilt and currently it's getting the ECU remapped. So far spent over 2 grand on these things so my advice is when buying a car as old as an R32, keep if you can about an extra quarter or fifth of it's value in your bank account. Keep it the way it is for a few months after you buy it and pay for any repairs that are needed. Service it regularly and it should be ok. Lucky for me my engine was rebuilt shortly before I bought mine, so far the engine has been running well except for the ECU needing to be remapped.

As for daily driving I do'nt need to drive far for work so it's not running up many km's. So far it's a money pit but I prefer to drive a money pit that is my choice and the car I like rather than some slow ass hatchback for the same price.

go the GTR, you only live once!

i feel that gtr is a pretty good daily driver, and when you want it to be a monster it will :(

which is ... how often, remind me! :no:

I normally get people riding my behind in their [insert random car]. Had a Liberty driver behind me this morning and I was doing nearly 10 over the limit because of him......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
×
×
  • Create New...