Jump to content
SAU Community

Recommended Posts

There is no way those two exhaust tips, assuming they're remotely indicative of the rest of the exhaust, would flow 900hp. Especially not in FI guise.

And, aside from the lack of intercooler, the V35 engine bay is pretty cramped. There's no venting to let out all that heat, of which there will be a shitload.

And a 1200hp car that doesn't have any gauges for you to check on coolant and oil temps? Assuming the car could even make that kind of power with its restrictive exhaust....not monitoring your temps and giving the heat no way to escape is a recipe for destruction.

Please NO DREAMERS

The guy clearly has no mirrors in his house.

lol thats funny

i just requested for engine bay pics so we'll see when or should i say "IF" i get a reply with pics lol

ben...

Same here.

Bet you he is now looking for some heavy modified V35 pics to get an engine bay pic :)

did you even need to ask? I mean he uses words like:

CONESOUR

enki

HKS from the Turbo back (5500)

It was on the dyno 18psi and made 900hp low tune boost hi octane on 24psi 1200hp

slotted over sized disks

I'd love to know what "low tune boost hi octane on 24psi" means... 1, there is no way any of the stuff he claims is true (I mean half of it doesn't even exist) and 2, I doubt he even owns the car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • We have a huge update coming in the next few months, version 5 of Invision will be released. I'm holding off any changes until after this change as I'm not sure what features will be removed or introduced.
    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
×
×
  • Create New...