Jump to content
SAU Community

Recommended Posts

Not banned though. Group A class was binned worldwide due to spiralling costs and regions went their own way resulting in V8SC and the less successful Super Tourers here so no class to race a GTR.

"spiralling costs" that makes me laugh,seing how im pretty sure its like $150k just for an engine now and the cars cost like a 1mil each. correct me if im wrong. i think for the reason it is still only v8s in 2007 .not cost but its all about marketing the aussie product. which is fine but everytime i walk past a hsv shp or im in target or kmart e.t.c. the only motoracing merchandise they sell is v8 bloody supercars! and they are still running 5 litre donks??/ my old man used to take me to see the sierras ,skylines rx7s back when it was group a and it was a lot more entertaining than watching a v8 ford or a v8 holden boring.....my 2 cents

yeah, i remember watching the tapes of grp a.

so entertaining! loved every minute of it!

i can barely sit through a few minutes of a V8SC round before i get bored and go do something else. like sleep.

the 2 horse race thing is getting really, really old.

carl that's just the result of rule changes and a strong economy. It was initially relatively cheap.

I personally would love to see more makes, so that is why i watch speedweek and plan on getting to more rounds of different race series. Without investment and patronage the others stay small while V8s are still seen by the dumbarse general population as the only game in town.

carl that's just the result of rule changes and a strong economy. It was initially relatively cheap.

I personally would love to see more makes, so that is why i watch speedweek and plan on getting to more rounds of different race series. Without investment and patronage the others stay small while V8s are still seen by the dumbarse general population as the only game in town.

the main reason the dumbasses follow the v's is because they think holden and falcon are australian (cough cough)

funny how they all use american design motor (chev) or canadian design motor (ford)

so much for being an aussie car lol

Could always pull this right off topic and discuss how they both have Ford diffs etc.....

No I'd like to see a return to using basically showroom (not "homologated") components for engine, gearbox and running gear with brakes, ecu and suspension relatively free but must use original mounting points.

im gunna be a bogan and echo some crap :unsure:

Yeah '92 was the last year of the GTRs, not because they were winning (lol) but because it was also the last year of the group As.

Bit of controversy over the win tho in '92. With a shagged car winning. And one thing i love to point out to holden fans... Skaify drove and won bathursts in a nissan lol

If your real keen there were some vids on here a while ago of the 91 and 92 bathursts with the gtrs. you could have a look and see if they are still up. or i could send them to you for a small fee to cover postage n shiz :huh:

.

No I'd like to see a return to using basically showroom (not "homologated") components for engine, gearbox and running gear with brakes, ecu and suspension relatively free but must use original mounting points.

iagree the days of the gtho and monaro and gtr torries were awesome

they even had volvo's racing back then

the old days of drive to the track ... race ... and then drive it home if it was still going

win on sunday sell on monday has no meaning with tthe way the v8's are run these days

Could always pull this right off topic and discuss how they both have Ford diffs etc.....

No I'd like to see a return to using basically showroom (not "homologated") components for engine, gearbox and running gear with brakes, ecu and suspension relatively free but must use original mounting points.

Well the rear ends in the V8's are only very tenuously linked to the Ford 9" diff. There has been (Like every component in the cars) an awful lot of engineering put into them. If you take a look at the detail work of the diffs in the car you can see why Ron Harrop & the like earn their money.

There are plenty of showroom series out there. Unfortunately the history of showroom class racing is a litany of cheating when done at the top level.

There are plenty of showroom series out there. Unfortunately the history of showroom class racing is a litany of cheating when done at the top level.

Simple, every car can be sold after every race in a lottery of people who want the car for the RRP.

Do they have the full race though?

A single race should be the full length of the dvd.

I've got one where they have squeezed 3 on to one disk and basically it sucks. They have chopped out that much its not funny. I've got 3 full 1990-1992 vids BUT they are poorish quality (DivX 320x240 vhs copy), none the less they still look ok on a 68cm tv, computer screen they look horrid.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...