Jump to content
SAU Community

Recommended Posts

Not banned though. Group A class was binned worldwide due to spiralling costs and regions went their own way resulting in V8SC and the less successful Super Tourers here so no class to race a GTR.

"spiralling costs" that makes me laugh,seing how im pretty sure its like $150k just for an engine now and the cars cost like a 1mil each. correct me if im wrong. i think for the reason it is still only v8s in 2007 .not cost but its all about marketing the aussie product. which is fine but everytime i walk past a hsv shp or im in target or kmart e.t.c. the only motoracing merchandise they sell is v8 bloody supercars! and they are still running 5 litre donks??/ my old man used to take me to see the sierras ,skylines rx7s back when it was group a and it was a lot more entertaining than watching a v8 ford or a v8 holden boring.....my 2 cents

yeah, i remember watching the tapes of grp a.

so entertaining! loved every minute of it!

i can barely sit through a few minutes of a V8SC round before i get bored and go do something else. like sleep.

the 2 horse race thing is getting really, really old.

carl that's just the result of rule changes and a strong economy. It was initially relatively cheap.

I personally would love to see more makes, so that is why i watch speedweek and plan on getting to more rounds of different race series. Without investment and patronage the others stay small while V8s are still seen by the dumbarse general population as the only game in town.

carl that's just the result of rule changes and a strong economy. It was initially relatively cheap.

I personally would love to see more makes, so that is why i watch speedweek and plan on getting to more rounds of different race series. Without investment and patronage the others stay small while V8s are still seen by the dumbarse general population as the only game in town.

the main reason the dumbasses follow the v's is because they think holden and falcon are australian (cough cough)

funny how they all use american design motor (chev) or canadian design motor (ford)

so much for being an aussie car lol

Could always pull this right off topic and discuss how they both have Ford diffs etc.....

No I'd like to see a return to using basically showroom (not "homologated") components for engine, gearbox and running gear with brakes, ecu and suspension relatively free but must use original mounting points.

im gunna be a bogan and echo some crap :unsure:

Yeah '92 was the last year of the GTRs, not because they were winning (lol) but because it was also the last year of the group As.

Bit of controversy over the win tho in '92. With a shagged car winning. And one thing i love to point out to holden fans... Skaify drove and won bathursts in a nissan lol

If your real keen there were some vids on here a while ago of the 91 and 92 bathursts with the gtrs. you could have a look and see if they are still up. or i could send them to you for a small fee to cover postage n shiz :huh:

.

No I'd like to see a return to using basically showroom (not "homologated") components for engine, gearbox and running gear with brakes, ecu and suspension relatively free but must use original mounting points.

iagree the days of the gtho and monaro and gtr torries were awesome

they even had volvo's racing back then

the old days of drive to the track ... race ... and then drive it home if it was still going

win on sunday sell on monday has no meaning with tthe way the v8's are run these days

Could always pull this right off topic and discuss how they both have Ford diffs etc.....

No I'd like to see a return to using basically showroom (not "homologated") components for engine, gearbox and running gear with brakes, ecu and suspension relatively free but must use original mounting points.

Well the rear ends in the V8's are only very tenuously linked to the Ford 9" diff. There has been (Like every component in the cars) an awful lot of engineering put into them. If you take a look at the detail work of the diffs in the car you can see why Ron Harrop & the like earn their money.

There are plenty of showroom series out there. Unfortunately the history of showroom class racing is a litany of cheating when done at the top level.

There are plenty of showroom series out there. Unfortunately the history of showroom class racing is a litany of cheating when done at the top level.

Simple, every car can be sold after every race in a lottery of people who want the car for the RRP.

Do they have the full race though?

A single race should be the full length of the dvd.

I've got one where they have squeezed 3 on to one disk and basically it sucks. They have chopped out that much its not funny. I've got 3 full 1990-1992 vids BUT they are poorish quality (DivX 320x240 vhs copy), none the less they still look ok on a 68cm tv, computer screen they look horrid.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...