Jump to content
SAU Community

Recommended Posts

Hi guys,

I am thinking of changing my suspension. I have a few names in my mind but I could not decide which one I should go for. I have used search button but could not find what I want. I have heard a lot about HKS Hipermax II, Tein Super Street, Buddy Club, Whiteline etc etc. I do not know much about suspension and would like to have some opinion from you guys.

Basically, my car setup is for street use. Its an r34 GTT coupe. After doing my research, I am now thinking whether I should go for HKS Hipermax II, Tein Super Street or Tein the Flex.

Any suggestions and reasons why you guys choose a particular suspension? cost vs performance ratio?

Thanks in advance.

Edited by ecr33sky
Link to comment
https://www.sau.com.au/forums/topic/152144-what-suspension-to-use/
Share on other sites

"....Any suggestions and reasons why you guys choose a particular suspension? cost vs performance ratio?"

Sydney Kids GB

Tried and tested, Austalian manufactured...well a fair bit of it, used it on my 32GTR with some uprated springs and its a nice compromise.

If your car is a daily driven street R34 then i would not go any further then some Whiteline swaybars and lowered springs. Stick with your std shocks, and get the required bushes to get the alignment settings right for the lowered height.

It will handle nicely on the street, feel far more balanced through corners and on the twisty stuff...and will be that little bit lowered for looks and again small performance increase.

Best thing, its relatively cheap and will not be harsh on the street, wont feel too different from std when hitting bumps...but will handle much, much better

the HKS will be super stiff probably.

I'm with Roy...swaybars and lowered springs with poly bushes all round. Make it feel nicer than stock, look cooler.

otherwise Bielstiens + lowered springs + sway bars ..I have them..damn nice.

Basically Im in the same position as you .. From what ive been told Sydney Kids group buy is the way to go .. But for everything its $2200 You dont need the covers so that nocks of $200 but your still looking at $2000 and then at least $600 for labour .. then a 4 wheel alignment!

Im not to sure how much you want to spend but thats what your looking at for comfort!

Edited by DECIM8

apologies to hijack, but I'm considering sydneykids group buy also, as my car came with cusco coilovers which are way to stiff for our cr@p roads.

A seed of doubt entered my head when one of my mates reckoned bilsteins are too stiff.

I'm assuming with sydneykids valving this won't be the case, but can anyone comment on the compliance of the bilsteins in the group buy versus stiff jap coilovers vs stock?

cheers

Mike

hi

HKS hyper max2 are very stiff.

HKS are good suspension...all you need to do is change the spring rate,make spring softer and reset the damper rate.then you will have good suspension set up.

Tein Flex is very good too.

if you can spend a bit more...try Tein RA.very good for street use and tract day.

If you were refering to the spring rates I quikly added them in when we updated to the new website so keep in mind the spring rates are custom and you can choose what you wish, If you are referring to something else I would be interested to no what??

Ryan

You can't go wrong with Nismo S-Tunes shocks & spring combo. Has 4 setting adjustment. Any way you can't go wrong with Sydneykid group buy too, heard so much positive feedback though it will be quite expensive for me to import in to Malaysia.

I got R-Tunes Nismo instead, firm which i like very much. Best you consider sitting various car with different makes of shock. Cheers mate.

apologies to hijack, but I'm considering sydneykids group buy also, as my car came with cusco coilovers which are way to stiff for our cr@p roads.

A seed of doubt entered my head when one of my mates reckoned bilsteins are too stiff.

I'm assuming with sydneykids valving this won't be the case, but can anyone comment on the compliance of the bilsteins in the group buy versus stiff jap coilovers vs stock?

cheers

Mike

y dont u just replace the springs on ur coilovers to something softer?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...